openwrt/package/mac80211/patches/510-ar9100_tsf_preserve.patch

40 lines
1.3 KiB
Diff

--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1280,7 +1280,8 @@ int ath9k_hw_reset(struct ath_hw *ah, st
macStaId1 = REG_READ(ah, AR_STA_ID1) & AR_STA_ID1_BASE_RATE_11B;
/* For chips on which RTC reset is done, save TSF before it gets cleared */
- if (AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
+ if (AR_SREV_9100(ah) ||
+ (AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL)))
tsf = ath9k_hw_gettsf64(ah);
saveLedState = REG_READ(ah, AR_CFG_LED) &
@@ -1312,7 +1313,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
}
/* Restore TSF */
- if (tsf && AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
+ if (tsf)
ath9k_hw_settsf64(ah, tsf);
if (AR_SREV_9280_10_OR_LATER(ah))
@@ -1325,6 +1326,17 @@ int ath9k_hw_reset(struct ath_hw *ah, st
if (r)
return r;
+ /*
+ * Some AR91xx SoC devices frequently fail to accept TSF writes
+ * right after the chip reset. When that happens, write a new
+ * value after the initvals have been applied, with an offset
+ * based on measured time differences
+ */
+ if (AR_SREV_9100(ah) && (ath9k_hw_gettsf64(ah) < tsf)) {
+ tsf += 1500;
+ ath9k_hw_settsf64(ah, tsf);
+ }
+
/* Setup MFP options for CCMP */
if (AR_SREV_9280_20_OR_LATER(ah)) {
/* Mask Retry(b11), PwrMgt(b12), MoreData(b13) to 0 in mgmt