openwrt/target/linux
Jeff Kletsky fb5a6d4926 ath79: Correct glinet, gl-ar300m-lite in 02_network
Previously, the board name for the GL-AR300M-Lite was incorrect
in 02_network, resulting in an unintended, fall-through condition
when initializing the network configuration.

While builds prior to commit 8dde11d521 (merged June 5, 2019)
    ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi
functioned properly, the error was noted in resolving first-boot
connectivity issues related to the single-phy nature of the device
and the "swap" of eth0 and eth1 related to that commit.

Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
(cherry picked from commit 549ea4dc1878d95ee2b752b8840d75a64a67b679)
2019-09-28 21:45:59 +02:00
..
apm821xx apm821xx: fix fan control on highest step 2019-09-28 14:35:43 +02:00
ar71xx kernel: bump 4.14 to 4.14.145 2019-09-20 15:52:25 +02:00
arc770
archs38
armvirt kernel: Remove CONFIG_COMPAT 2019-05-11 17:15:41 +02:00
at91 at91:renaming subtraget legacy to sam9x 2019-05-30 12:12:57 +02:00
ath25 treewide: sysupgrade: use $UPGRADE_BACKUP to check for backup 2019-09-16 05:57:08 +02:00
ath79 ath79: Correct glinet, gl-ar300m-lite in 02_network 2019-09-28 21:45:59 +02:00
bcm53xx bcm53xx: sysupgrade: support Luxul firmware format 2019-09-16 16:02:26 +02:00
brcm47xx brcm47xx: sysupgrade: fix device model detection 2019-09-26 06:53:16 +02:00
brcm63xx kernel: bump 4.14 to 4.14.145 2019-09-20 15:52:25 +02:00
brcm2708 kernel: bump 4.14 to 4.14.145 2019-09-20 15:52:25 +02:00
cns3xxx treewide: sysupgrade: don't use $ARGV in platform_do_upgrade() 2019-09-07 14:31:16 +02:00
gemini kernel: bump 4.14 to 4.4.142 2019-09-11 09:57:28 +02:00
generic kernel: port upstream nft_flow_offload changes to xt_FLOWOFFLOAD and fix routing issues 2019-09-26 10:25:01 +02:00
imx6 treewide: sysupgrade: use $UPGRADE_BACKUP to check for backup 2019-09-16 05:57:08 +02:00
ipq40xx ipq40xx: fix hw-crypto detection of qce driver 2019-09-28 19:11:34 +02:00
ipq806x ipq806x: remove unsupported hw-crypto qce driver 2019-09-28 19:17:10 +02:00
kirkwood treewide: sysupgrade: don't use $ARGV in platform_do_upgrade() 2019-09-07 14:31:16 +02:00
lantiq kernel: bump 4.14 to 4.14.145 2019-09-20 15:52:25 +02:00
layerscape kernel: bump 4.14 to 4.14.145 2019-09-20 15:52:25 +02:00
malta malta: Deactivate MIPS O32 and N32 support 2019-05-14 21:50:42 +02:00
mediatek kernel: bump 4.14 to 4.14.145 2019-09-20 15:52:25 +02:00
mpc85xx treewide: sysupgrade: don't use $ARGV in platform_do_upgrade() 2019-09-07 14:31:16 +02:00
mvebu treewide: use new procd sysupgrade $UPGRADE_BACKUP variable 2019-09-12 13:27:29 +02:00
mxs mxs: disable unused serial drivers 2019-03-11 19:35:43 +01:00
octeon treewide: use new procd sysupgrade $UPGRADE_BACKUP variable 2019-09-12 13:27:29 +02:00
octeontx kernel: Remove CONFIG_COMPAT 2019-05-11 17:15:41 +02:00
omap treewide: use new procd sysupgrade $UPGRADE_BACKUP variable 2019-09-12 13:27:29 +02:00
oxnas kernel: bump 4.14 to 4.14.128 2019-06-20 15:50:00 +02:00
pistachio kernel: bump 4.14 to 4.14.91 2019-01-07 17:09:06 +01:00
ramips ramips: add factory image for NETGEAR R6220 2019-09-16 21:43:39 +02:00
rb532
samsung kernel: Do not set CONFIG_DEVMEM or CONFIG_DEVKMEM 2019-05-11 17:15:41 +02:00
sunxi treewide: use new procd sysupgrade $UPGRADE_BACKUP variable 2019-09-12 13:27:29 +02:00
tegra treewide: use new procd sysupgrade $UPGRADE_BACKUP variable 2019-09-12 13:27:29 +02:00
uml kernel: Deactivate CONFIG_BINFMT_MISC 2019-05-11 17:15:41 +02:00
x86 treewide: use new procd sysupgrade $UPGRADE_BACKUP variable 2019-09-12 13:27:29 +02:00
zynq zynq: make title consistent for all devices 2019-05-17 21:41:43 +02:00
Makefile