André Valentin a0ed7af6c6 ipq806x/nbg6817: add support for ZyXEL NBG6817 ... CPU: 2x1.8GHz ARM, RAM: 512MiB Storage: 4MiB serial Flash, 3.9GiB MMC NIC: 2x1GBit/s, Switch with 5 external and 2 internal ports WiFi: Dualband, ath10k 2.4GHz, 5GHz MU-MIMO For installation copy xx-mmcblk0p4-kernel.bin and xx-mmcblk0p5-rootfs-full.bin to device. Then run: cat xx-mmcblk0p4-kernel.bin > /dev/mmc0blk0p4 cat xx-mmcblk0p5-rootfs-full.bin > /dev/mmc0blk0p5 reboot -f For debugging serial console is easily visible on board, no soldering needed. Signed-off-by: André Valentin <avalentin@marcant.net>		2016-10-26 12:37:46 +02:00
..
board.d	ipq806x/nbg6817: add support for ZyXEL NBG6817	2016-10-26 12:37:46 +02:00
hotplug.d	ipq806x/nbg6817: add support for ZyXEL NBG6817	2016-10-26 12:37:46 +02:00
init.d	ipq806x: base-files: add support for Linksys EA8500	2016-06-13 22:51:42 +02:00
diag.sh	ipq806x: add support for indicating the boot and upgrade state using four leds	2016-10-15 11:36:50 +02:00
inittab	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00