mirror of https://github.com/hak5/openwrt.git
326 lines
7.0 KiB
Diff
326 lines
7.0 KiB
Diff
From 4cb8cf8c6ce47b652c93bae2b4b480bd7ea7f940 Mon Sep 17 00:00:00 2001
|
|
From: Eric Anholt <eric@anholt.net>
|
|
Date: Fri, 6 May 2016 11:48:35 -0700
|
|
Subject: [PATCH 329/381] BCM270X_DT: Move vc4 node contents to
|
|
bcm2708_common.dtsi.
|
|
|
|
This should clarify what's going on with the overlay: The hardware is
|
|
always present, we're just enabling the DT node so that the vc4 driver
|
|
probes.
|
|
|
|
The interrupts are left in the overlay, because the firmware doesn't
|
|
check node status before masking out the vc4 interrupts.
|
|
|
|
By having the nodes in the common file, we'll be able to correctly
|
|
connect the HDMI HPD GPIO so that we can detect whether an HDMI
|
|
monitor is connected.
|
|
|
|
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
---
|
|
arch/arm/boot/dts/bcm2708_common.dtsi | 51 +++++++
|
|
arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 160 ++++++++++-----------
|
|
2 files changed, 129 insertions(+), 82 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/bcm2708_common.dtsi
|
|
+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
|
|
@@ -1,4 +1,7 @@
|
|
+#include "dt-bindings/clock/bcm2835.h"
|
|
#include <dt-bindings/clock/bcm2835-aux.h>
|
|
+#include "dt-bindings/power/raspberrypi-power.h"
|
|
+#include "dt-bindings/gpio/gpio.h"
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
@@ -170,6 +173,18 @@
|
|
status = "disabled";
|
|
};
|
|
|
|
+ pixelvalve0: pixelvalve@7e206000 {
|
|
+ compatible = "brcm,bcm2835-pixelvalve0";
|
|
+ reg = <0x7e206000 0x100>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ pixelvalve1: pixelvalve@7e207000 {
|
|
+ compatible = "brcm,bcm2835-pixelvalve1";
|
|
+ reg = <0x7e207000 0x100>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
pwm: pwm@7e20c000 {
|
|
compatible = "brcm,bcm2835-pwm";
|
|
reg = <0x7e20c000 0x28>;
|
|
@@ -227,6 +242,12 @@
|
|
status = "disabled";
|
|
};
|
|
|
|
+ hvs: hvs@7e400000 {
|
|
+ compatible = "brcm,bcm2835-hvs";
|
|
+ reg = <0x7e400000 0x6000>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
i2c1: i2c@7e804000 {
|
|
compatible = "brcm,bcm2708-i2c";
|
|
reg = <0x7e804000 0x1000>;
|
|
@@ -261,6 +282,25 @@
|
|
status = "disabled";
|
|
};
|
|
|
|
+ pixelvalve2: pixelvalve@7e807000 {
|
|
+ compatible = "brcm,bcm2835-pixelvalve2";
|
|
+ reg = <0x7e807000 0x100>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ hdmi: hdmi@7e902000 {
|
|
+ compatible = "brcm,bcm2835-hdmi";
|
|
+ reg = <0x7e902000 0x600>,
|
|
+ <0x7e808000 0x100>;
|
|
+ ddc = <&i2c2>;
|
|
+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
|
|
+ clocks = <&cprman BCM2835_PLLH_PIX>,
|
|
+ <&cprman BCM2835_CLOCK_HSM>;
|
|
+ clock-names = "pixel", "hdmi";
|
|
+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
usb: usb@7e980000 {
|
|
compatible = "brcm,bcm2708-usb";
|
|
reg = <0x7e980000 0x10000>,
|
|
@@ -269,6 +309,12 @@
|
|
<1 9>;
|
|
};
|
|
|
|
+ v3d: v3d@7ec00000 {
|
|
+ compatible = "brcm,vc4-v3d";
|
|
+ reg = <0x7ec00000 0x1000>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
firmware: firmware {
|
|
compatible = "raspberrypi,bcm2835-firmware";
|
|
mboxes = <&mailbox>;
|
|
@@ -303,6 +349,11 @@
|
|
firmware = <&firmware>;
|
|
};
|
|
|
|
+ gpu: gpu {
|
|
+ compatible = "brcm,bcm2835-vc4";
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
/* Onboard audio */
|
|
audio: audio {
|
|
compatible = "brcm,bcm2835-audio";
|
|
--- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts
|
|
@@ -5,129 +5,125 @@
|
|
/dts-v1/;
|
|
/plugin/;
|
|
|
|
-#include "dt-bindings/clock/bcm2835.h"
|
|
-#include "dt-bindings/power/raspberrypi-power.h"
|
|
-#include "dt-bindings/gpio/gpio.h"
|
|
-
|
|
/ {
|
|
compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
|
|
|
|
fragment@0 {
|
|
+ target-path = "/chosen";
|
|
+ __overlay__ {
|
|
+ bootargs = "cma=256M@256M";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@1 {
|
|
+ target-path = "/chosen";
|
|
+ __dormant__ {
|
|
+ bootargs = "cma=192M@256M";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@2 {
|
|
+ target-path = "/chosen";
|
|
+ __dormant__ {
|
|
+ bootargs = "cma=128M@128M";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@3 {
|
|
+ target-path = "/chosen";
|
|
+ __dormant__ {
|
|
+ bootargs = "cma=96M@128M";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@4 {
|
|
+ target-path = "/chosen";
|
|
+ __dormant__ {
|
|
+ bootargs = "cma=64M@64M";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@5 {
|
|
target = <&i2c2>;
|
|
__overlay__ {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
- fragment@1 {
|
|
+ fragment@6 {
|
|
target = <&cprman>;
|
|
__overlay__ {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
- fragment@2 {
|
|
+ fragment@7 {
|
|
target = <&fb>;
|
|
__overlay__ {
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
- fragment@3 {
|
|
- target = <&soc>;
|
|
+ fragment@8 {
|
|
+ target = <&pixelvalve0>;
|
|
__overlay__ {
|
|
- #address-cells = <1>;
|
|
- #size-cells = <1>;
|
|
+ interrupts = <2 13>; /* pwa0 */
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
|
|
- pixelvalve@7e206000 {
|
|
- compatible = "brcm,bcm2835-pixelvalve0";
|
|
- reg = <0x7e206000 0x100>;
|
|
- interrupts = <2 13>; /* pwa0 */
|
|
- };
|
|
-
|
|
- pixelvalve@7e207000 {
|
|
- compatible = "brcm,bcm2835-pixelvalve1";
|
|
- reg = <0x7e207000 0x100>;
|
|
- interrupts = <2 14>; /* pwa1 */
|
|
- };
|
|
-
|
|
- hvs@7e400000 {
|
|
- compatible = "brcm,bcm2835-hvs";
|
|
- reg = <0x7e400000 0x6000>;
|
|
- interrupts = <2 1>;
|
|
- };
|
|
-
|
|
- pixelvalve@7e807000 {
|
|
- compatible = "brcm,bcm2835-pixelvalve2";
|
|
- reg = <0x7e807000 0x100>;
|
|
- interrupts = <2 10>; /* pixelvalve */
|
|
- };
|
|
-
|
|
- hdmi@7e902000 {
|
|
- compatible = "brcm,bcm2835-hdmi";
|
|
- reg = <0x7e902000 0x600>,
|
|
- <0x7e808000 0x100>;
|
|
- interrupts = <2 8>, <2 9>;
|
|
- ddc = <&i2c2>;
|
|
- hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
|
|
- clocks = <&cprman BCM2835_PLLH_PIX>,
|
|
- <&cprman BCM2835_CLOCK_HSM>;
|
|
- clock-names = "pixel", "hdmi";
|
|
- power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
|
|
- };
|
|
-
|
|
- v3d@7ec00000 {
|
|
- compatible = "brcm,vc4-v3d";
|
|
- reg = <0x7ec00000 0x1000>;
|
|
- interrupts = <1 10>;
|
|
- };
|
|
-
|
|
- gpu@7e4c0000 {
|
|
- compatible = "brcm,bcm2835-vc4";
|
|
- };
|
|
+ fragment@9 {
|
|
+ target = <&pixelvalve1>;
|
|
+ __overlay__ {
|
|
+ interrupts = <2 14>; /* pwa1 */
|
|
+ status = "okay";
|
|
};
|
|
};
|
|
|
|
- fragment@4 {
|
|
- target-path = "/chosen";
|
|
- __overlay__ {
|
|
- bootargs = "cma=256M@256M";
|
|
+ fragment@10 {
|
|
+ target = <&pixelvalve2>;
|
|
+ __overlay__ {
|
|
+ interrupts = <2 10>; /* pixelvalve */
|
|
+ status = "okay";
|
|
};
|
|
};
|
|
|
|
- fragment@5 {
|
|
- target-path = "/chosen";
|
|
- __dormant__ {
|
|
- bootargs = "cma=192M@256M";
|
|
+ fragment@11 {
|
|
+ target = <&hvs>;
|
|
+ __overlay__ {
|
|
+ interrupts = <2 1>;
|
|
+ status = "okay";
|
|
};
|
|
};
|
|
|
|
- fragment@6 {
|
|
- target-path = "/chosen";
|
|
- __dormant__ {
|
|
- bootargs = "cma=128M@128M";
|
|
+ fragment@12 {
|
|
+ target = <&hdmi>;
|
|
+ __overlay__ {
|
|
+ interrupts = <2 8>, <2 9>;
|
|
+ status = "okay";
|
|
};
|
|
};
|
|
|
|
- fragment@7 {
|
|
- target-path = "/chosen";
|
|
- __dormant__ {
|
|
- bootargs = "cma=96M@128M";
|
|
+ fragment@13 {
|
|
+ target = <&v3d>;
|
|
+ __overlay__ {
|
|
+ interrupts = <1 10>;
|
|
+ status = "okay";
|
|
};
|
|
};
|
|
|
|
- fragment@8 {
|
|
- target-path = "/chosen";
|
|
- __dormant__ {
|
|
- bootargs = "cma=64M@64M";
|
|
+ fragment@14 {
|
|
+ target = <&gpu>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
};
|
|
};
|
|
|
|
__overrides__ {
|
|
- cma-256 = <0>,"+4-5-6-7-8";
|
|
- cma-192 = <0>,"-4+5-6-7-8";
|
|
- cma-128 = <0>,"-4-5+6-7-8";
|
|
- cma-96 = <0>,"-4-5-6+7-8";
|
|
- cma-64 = <0>,"-4-5-6-7+8";
|
|
+ cma-256 = <0>,"+0-1-2-3-4";
|
|
+ cma-192 = <0>,"-0+1-2-3-4";
|
|
+ cma-128 = <0>,"-0-1+2-3-4";
|
|
+ cma-96 = <0>,"-0-1-2+3-4";
|
|
+ cma-64 = <0>,"-0-1-2-3+4";
|
|
};
|
|
};
|