openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Jonas Gorski f92b2a956b brcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL router This adds kernel support support for Sagemcom F@st 2704 wireless ADSL router. It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+ modem equipped with 64 MiB RAM and 8 MiB flash. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4266/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39671		2014-02-22 11:16:30 +00:00
config	config: lxc: enable KERNEL_POSIX_MQUEUE	2014-01-24 13:49:39 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	upgrade 3.13 targets to 3.13.2, refresh patches	2014-02-13 13:27:14 +00:00
package	kernel: add missing depends on kmod-mii	2014-02-21 22:57:39 +00:00
scripts	scripts/kconfig.pl: Indicate which file we couldn't open	2014-01-19 17:27:04 +00:00
target	brcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL router	2014-02-22 11:16:30 +00:00
toolchain	gcc: prevent the use of LDRD/STRD on ARMv5TE	2014-02-19 19:20:10 +00:00
tools	cmake: upgrade to 2.8.12.2	2014-02-16 21:51:10 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	add git-src to .gitignore	2014-01-12 12:06:39 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	move menuconfig options into separate files	2013-11-22 14:30:40 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README	build: BSD compile fixes	2013-03-07 17:32:29 +00:00
feeds.conf.default	feeds: disable the x-wrt feed, it is unmaintained	2014-02-03 14:29:04 +00:00
rules.mk	FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options.	2013-11-29 10:59:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org