hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org
8,166 Commits
5 Branches
29 Tags
202 MiB
C 65.7%
Makefile 15.8%
Shell 7.2%
Roff 5.7%
Perl 1.9%
Other 3.6%
 
 
 
 
 
 
Go to file
Felix Fietkau f7e09198fe (1/6) bcm57xx: init from diag 
I've been working to finish up the bcm57xx module package nbd
posted a few months ago.  I am no expert, just had some spare
time and some motivation.  Here is the background:

https://dev.openwrt.org/ticket/2744

This first patch disables the bcm57xx gpio setup in broadcom-diag.
The switch needs to be initialized by the driver so the driver can
then reset the switch ASAP.  If the switch isn't reset quickly enough,
it will forward packets between the WAN and LAN, which will cause
problems with modems that only allow one mac to access the internet.

Tested on wrt350n.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11466
 		2008-06-15 11:09:27 +00:00
docs fix a small dep bug in the docs/ dir 2008-06-09 15:38:23 +00:00
include remove accidentally committed swap file 2008-06-13 15:29:07 +00:00
package (1/6) bcm57xx: init from diag 2008-06-15 11:09:27 +00:00
scripts use the european kernel.org mirror too 2008-06-12 14:48:32 +00:00
target temporary hack to fixup the mach id for the wrt350nv2 2008-06-13 12:58:28 +00:00
toolchain finally fixes etrax toolchain problems, thanks nbd 2008-06-06 20:12:05 +00:00
tools Added lua (lua host bytecode-compiler) to tools/ 2008-05-30 18:38:14 +00:00
.gitignore update svn:ignore and .gitignore 2008-06-06 19:04:01 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in adds missing patch for native toolchain 2008-06-10 07:18:41 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile large improvement for parallel builds. works without V=99 now and without warnings. tested with -j on an 2x dual core opteron machine 2008-06-09 15:38:45 +00:00
README add information about the tex4ht requirement for the docs 2007-02-26 01:06:41 +00:00
feeds.conf Switched xwrt url in feeds.conf (berlios http falls over occasionally) 2008-03-02 22:07:46 +00:00
rules.mk adds missing patch for native toolchain 2008-06-10 07:18:41 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org