Gabor Juhos 1374e5a721 ar71xx: rb91x: fix ethernet packet loss issues ... The RB91x boards are suffering from ethernet packet loss after a cold boot. The cause of the problem is that the AR8035 PHYs requires special register settings to work reliably on these boards. Enable the RGMII TX, RX delays and disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD delay in the ETH_CFG register to fix the issue. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40509		2014-04-13 20:41:52 +00:00
..
base-files	ar71xx: add user-space support for the ZyXEL NBG6716 board	2014-04-13 08:29:07 +00:00
files	ar71xx: rb91x: fix ethernet packet loss issues	2014-04-13 20:41:52 +00:00
generic	ar71xx: initial support for TP-Link Archer C7v2	2014-04-12 09:52:54 +00:00
image	ar71xx: add profile and build image for the ZyXEL NBG6716 board	2014-04-13 08:29:09 +00:00
mikrotik	ar71xx/mikrotik: enable the AT803x PHY driver	2014-04-13 20:41:51 +00:00
nand	ar71xx: add profile and build image for the ZyXEL NBG6716 board	2014-04-13 08:29:09 +00:00
patches-3.10	ar71xx: allow to configure AR803x PHYs via platform data	2014-04-13 20:41:50 +00:00
Makefile	kernel: update 3.10 to 3.10.36	2014-04-12 11:59:07 +00:00
base-files.mk	ar71xx: drop procd_init console hack	2013-06-21 16:53:11 +00:00
config-3.10	ar71xx: add kernel support for ZyXEL NBG 6716	2014-04-13 08:29:05 +00:00
modules.mk	ar71xx: always enable hw ecc support for the ar934x-nfc module	2013-11-01 18:33:18 +00:00