openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Felix Fietkau f607e2cc76 atheros: ignore reports about oversized ethernet frames, as can be caused by the header mode of marvell 88e6060 switches (see https://dev.openwrt.org/ticket/3507#comment:16 ) SVN-Revision: 15185		2009-04-10 11:27:39 +00:00
docs	document a little bit more the rationale of the 6bridge script	2009-04-02 09:43:53 +00:00
include	fix source file vs library order in a few prereq checks (#4326 )	2009-04-09 21:13:15 +00:00
package	hostapd only supports either b or g as hwmode configuration variable. If bg is set the scripts transfers it now to g mode.	2009-04-09 21:44:30 +00:00
scripts	cygwin also needs to be passed LIBS=-lncurses to link lxdialog successfully	2009-04-10 10:08:47 +00:00
target	atheros: ignore reports about oversized ethernet frames, as can be caused by the header mode of marvell 88e6060 switches (see https://dev.openwrt.org/ticket/3507#comment:16 )	2009-04-10 11:27:39 +00:00
toolchain	mark uclibc nptl and snapshot as broken	2009-04-09 20:01:28 +00:00
tools	fix ccache host installation (#4902 )	2009-04-09 13:16:57 +00:00
.gitignore	add feeds.conf to .gitignore	2008-09-23 11:06:06 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	Add FEATURE ramdisk to be able to select the use of INITRAMFS for a sub-target	2009-03-18 15:57:18 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	avoid implicit rules in even more places	2009-03-03 14:16:48 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
feeds.conf.default	feeds.conf.default: Change openwrt feeds urls from https to svn	2009-04-01 18:29:19 +00:00
rules.mk	move cflags default setting to target makefiles	2009-03-14 03:17:06 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org