mirror of https://github.com/hak5/openwrt.git
57 lines
1.8 KiB
Diff
57 lines
1.8 KiB
Diff
From: Axel Lin <axel.lin@ingics.com>
|
|
Subject: [PATCH] regulator: pfuze100: Simplify pfuze100_set_ramp_delay
|
|
implementation
|
|
|
|
Simplify the equation to calculate ramp_delay.
|
|
Below equations are equivalent:
|
|
ramp_delay = 25000 / (2 * ramp_delay);
|
|
ramp_delay = 50000 / (4 * ramp_delay);
|
|
ramp_delay = 25000 / (2 * ramp_delay);
|
|
ramp_delay = 12500 / ramp_delay;
|
|
So we don't need to read BIT6 of rdev->desc->vsel_reg for applying different
|
|
equations.
|
|
|
|
Also use rdev->desc->vsel_reg instead of run-time calculate register address.
|
|
|
|
Signed-off-by: Axel Lin <axel.lin@ingics.com>
|
|
Reviewed-by: Robin Gong <b38343@freescale.com>
|
|
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
---
|
|
drivers/regulator/pfuze100-regulator.c | 21 +++++----------------
|
|
1 file changed, 5 insertions(+), 16 deletions(-)
|
|
|
|
--- a/drivers/regulator/pfuze100-regulator.c
|
|
+++ b/drivers/regulator/pfuze100-regulator.c
|
|
@@ -93,26 +93,15 @@ static int pfuze100_set_ramp_delay(struc
|
|
{
|
|
struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
|
|
int id = rdev->desc->id;
|
|
- unsigned int val, ramp_bits, reg;
|
|
+ unsigned int ramp_bits;
|
|
int ret;
|
|
|
|
if (id < PFUZE100_SWBST) {
|
|
- if (id == PFUZE100_SW1AB)
|
|
- reg = PFUZE100_SW1ABVOL;
|
|
- else
|
|
- reg = PFUZE100_SW1CVOL + (id - PFUZE100_SW1C) * 7;
|
|
- regmap_read(pfuze100->regmap, reg, &val);
|
|
-
|
|
- if (id <= PFUZE100_SW1C)
|
|
- ramp_delay = 25000 / (2 * ramp_delay);
|
|
- else if (val & 0x40)
|
|
- ramp_delay = 50000 / (4 * ramp_delay);
|
|
- else
|
|
- ramp_delay = 25000 / (2 * ramp_delay);
|
|
-
|
|
+ ramp_delay = 12500 / ramp_delay;
|
|
ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
|
|
- ret = regmap_update_bits(pfuze100->regmap, reg + 4 , 0xc0,
|
|
- ramp_bits << 6);
|
|
+ ret = regmap_update_bits(pfuze100->regmap,
|
|
+ rdev->desc->vsel_reg + 4,
|
|
+ 0xc0, ramp_bits << 6);
|
|
if (ret < 0)
|
|
dev_err(pfuze100->dev, "ramp failed, err %d\n", ret);
|
|
} else
|