mirror of https://github.com/hak5/openwrt.git
113 lines
3.3 KiB
Diff
113 lines
3.3 KiB
Diff
From 5ca9eadcb5f5cd9af6f1650029ad64052a1a0b10 Mon Sep 17 00:00:00 2001
|
|
From: Chen-Yu Tsai <wens@csie.org>
|
|
Date: Tue, 24 Dec 2013 21:26:17 +0800
|
|
Subject: [PATCH] clk: sunxi: Allwinner A20 output clock support
|
|
|
|
This patch adds support for the external clock outputs on the
|
|
Allwinner A20 SoC. The clock outputs are similar to "module 0"
|
|
type clocks, with different offsets and widths for clock factors.
|
|
|
|
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
---
|
|
Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
|
|
drivers/clk/sunxi/clk-sunxi.c | 57 +++++++++++++++++++++++
|
|
2 files changed, 58 insertions(+)
|
|
|
|
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
|
|
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
|
|
@@ -37,6 +37,7 @@ Required properties:
|
|
"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
|
|
"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
|
|
"allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
|
|
+ "allwinner,sun7i-a20-out-clk" - for the external output clocks
|
|
|
|
Required properties for all clocks:
|
|
- reg : shall be the control register address for the clock.
|
|
--- a/drivers/clk/sunxi/clk-sunxi.c
|
|
+++ b/drivers/clk/sunxi/clk-sunxi.c
|
|
@@ -396,6 +396,47 @@ void clk_sunxi_mmc_phase_control(struct
|
|
|
|
|
|
/**
|
|
+ * sun7i_a20_get_out_factors() - calculates m, p factors for CLK_OUT_A/B
|
|
+ * CLK_OUT rate is calculated as follows
|
|
+ * rate = (parent_rate >> p) / (m + 1);
|
|
+ */
|
|
+
|
|
+static void sun7i_a20_get_out_factors(u32 *freq, u32 parent_rate,
|
|
+ u8 *n, u8 *k, u8 *m, u8 *p)
|
|
+{
|
|
+ u8 div, calcm, calcp;
|
|
+
|
|
+ /* These clocks can only divide, so we will never be able to achieve
|
|
+ * frequencies higher than the parent frequency */
|
|
+ if (*freq > parent_rate)
|
|
+ *freq = parent_rate;
|
|
+
|
|
+ div = parent_rate / *freq;
|
|
+
|
|
+ if (div < 32)
|
|
+ calcp = 0;
|
|
+ else if (div / 2 < 32)
|
|
+ calcp = 1;
|
|
+ else if (div / 4 < 32)
|
|
+ calcp = 2;
|
|
+ else
|
|
+ calcp = 3;
|
|
+
|
|
+ calcm = DIV_ROUND_UP(div, 1 << calcp);
|
|
+
|
|
+ *freq = (parent_rate >> calcp) / calcm;
|
|
+
|
|
+ /* we were called to round the frequency, we can now return */
|
|
+ if (n == NULL)
|
|
+ return;
|
|
+
|
|
+ *m = calcm - 1;
|
|
+ *p = calcp;
|
|
+}
|
|
+
|
|
+
|
|
+
|
|
+/**
|
|
* sunxi_factors_clk_setup() - Setup function for factor clocks
|
|
*/
|
|
|
|
@@ -455,6 +496,14 @@ static struct clk_factors_config sun4i_m
|
|
.pwidth = 2,
|
|
};
|
|
|
|
+/* user manual says "n" but it's really "p" */
|
|
+static struct clk_factors_config sun7i_a20_out_config = {
|
|
+ .mshift = 8,
|
|
+ .mwidth = 5,
|
|
+ .pshift = 20,
|
|
+ .pwidth = 2,
|
|
+};
|
|
+
|
|
static const struct factors_data sun4i_pll1_data __initconst = {
|
|
.enable = 31,
|
|
.table = &sun4i_pll1_config,
|
|
@@ -491,6 +540,13 @@ static const struct factors_data sun4i_m
|
|
.getter = sun4i_get_mod0_factors,
|
|
};
|
|
|
|
+static const struct factors_data sun7i_a20_out_data __initconst = {
|
|
+ .enable = 31,
|
|
+ .mux = 24,
|
|
+ .table = &sun7i_a20_out_config,
|
|
+ .getter = sun7i_a20_get_out_factors,
|
|
+};
|
|
+
|
|
static struct clk * __init sunxi_factors_clk_setup(struct device_node *node,
|
|
const struct factors_data *data)
|
|
{
|
|
@@ -998,6 +1054,7 @@ static const struct of_device_id clk_fac
|
|
{.compatible = "allwinner,sun5i-a13-ahb-clk", .data = &sun5i_a13_ahb_data,},
|
|
{.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,},
|
|
{.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,},
|
|
+ {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,},
|
|
{}
|
|
};
|
|
|