openwrt/target/linux/omap/patches-3.12/901-wlcore-set-irq_flags-in...

238 lines
7.2 KiB
Diff

The platform_quirk element in the platform data was used to change the
way the IRQ is triggered. When set, the EDGE_IRQ quirk would change
the irqflags used and treat edge trigger differently from the rest.
Instead of hiding this irq flag setting behind the quirk, have the
board files set the flags during initialization. This will be more
meaningful than driver-specific quirks when we switch to DT.
Additionally, fix missing gpio_request() calls in the boarding files
(so that setting the flags actually works).
Cc: Tony Lindgren <tony@atomide.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
---
arch/arm/mach-davinci/board-da850-evm.c | 8 +++++++-
arch/arm/mach-omap2/board-omap3evm.c | 19 ++++++++++++++++++
arch/arm/mach-omap2/board-zoom-peripherals.c | 30 +++++++++++++++++++++++++---
drivers/net/wireless/ti/wlcore/debugfs.c | 2 +-
drivers/net/wireless/ti/wlcore/main.c | 17 ++++++++--------
drivers/net/wireless/ti/wlcore/wlcore.h | 5 ++---
include/linux/wl12xx.h | 4 ----
7 files changed, 64 insertions(+), 21 deletions(-)
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1371,7 +1371,6 @@ static const short da850_wl12xx_pins[] _
static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
.irq = -1,
.board_ref_clock = WL12XX_REFCLOCK_38,
- .platform_quirks = WL12XX_PLATFORM_QUIRK_EDGE_IRQ,
};
static __init int da850_wl12xx_init(void)
@@ -1402,6 +1401,13 @@ static __init int da850_wl12xx_init(void
goto free_wlan_en;
}
+ ret = irq_set_irq_type(gpio_to_irq(DA850_WLAN_IRQ),
+ IRQ_TYPE_EDGE_RISING);
+ if (ret) {
+ pr_err("Could not set wl12xx irq type: %d\n", ret);
+ goto free;
+ }
+
da850_wl12xx_wlan_data.irq = gpio_to_irq(DA850_WLAN_IRQ);
ret = wl12xx_set_platform_data(&da850_wl12xx_wlan_data);
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -627,12 +627,31 @@ static void __init omap3_evm_wl12xx_init
/* WL12xx WLAN Init */
omap3evm_wlan_data.irq = gpio_to_irq(OMAP3EVM_WLAN_IRQ_GPIO);
+
+ ret = gpio_request_one(OMAP3EVM_WLAN_IRQ_GPIO, GPIOF_IN,
+ "OMAP3EVM_WLAN_IRQ_GPIO");
+ if (ret) {
+ pr_err("error requesting wl12xx gpio: %d\n", ret);
+ goto out;
+ }
+
+ ret = irq_set_irq_type(gpio_to_irq(OMAP3EVM_WLAN_IRQ_GPIO),
+ IRQ_TYPE_LEVEL_HIGH);
+ if (ret) {
+ pr_err("error setting wl12xx irq type: %d\n", ret);
+ goto free;
+ }
+
ret = wl12xx_set_platform_data(&omap3evm_wlan_data);
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
ret = platform_device_register(&omap3evm_wlan_regulator);
if (ret)
pr_err("error registering wl12xx device: %d\n", ret);
+out:
+ return;
+free:
+ gpio_free(OMAP3EVM_WLAN_IRQ_GPIO);
#endif
}
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -339,16 +339,40 @@ static void enable_board_wakeup_source(v
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
-void __init zoom_peripherals_init(void)
+static void __init zoom_wilink_init(void)
{
int ret;
omap_zoom_wlan_data.irq = gpio_to_irq(OMAP_ZOOM_WLAN_IRQ_GPIO);
- ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
- if (ret)
+ ret = gpio_request_one(OMAP_ZOOM_WLAN_IRQ_GPIO, GPIOF_IN,
+ "OMAP_ZOOM_WLAN_IRQ_GPIO");
+ if (ret) {
+ pr_err("error requesting wl12xx gpio: %d\n", ret);
+ goto out;
+ }
+
+ ret = irq_set_irq_type(gpio_to_irq(OMAP_ZOOM_WLAN_IRQ_GPIO),
+ IRQ_TYPE_LEVEL_HIGH);
+ if (ret) {
+ pr_err("error setting wl12xx irq type: %d\n", ret);
+ goto free;
+ }
+
+ ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
+ if (ret) {
pr_err("error setting wl12xx data: %d\n", ret);
+ goto free;
+ }
+out:
+ return;
+free:
+ gpio_free(OMAP_ZOOM_WLAN_IRQ_GPIO);
+}
+void __init zoom_peripherals_init(void)
+{
+ zoom_wilink_init();
omap_hsmmc_init(mmc);
omap_i2c_init();
pwm_add_table(zoom_pwm_lookup, ARRAY_SIZE(zoom_pwm_lookup));
--- a/drivers/net/wireless/ti/wlcore/debugfs.c
+++ b/drivers/net/wireless/ti/wlcore/debugfs.c
@@ -486,7 +486,7 @@ static ssize_t driver_state_read(struct
DRIVER_STATE_PRINT_HEX(irq);
/* TODO: ref_clock and tcxo_clock were moved to wl12xx priv */
DRIVER_STATE_PRINT_HEX(hw_pg_ver);
- DRIVER_STATE_PRINT_HEX(platform_quirks);
+ DRIVER_STATE_PRINT_HEX(irq_flags);
DRIVER_STATE_PRINT_HEX(chip.id);
DRIVER_STATE_PRINT_STR(chip.fw_ver_str);
DRIVER_STATE_PRINT_STR(chip.phy_fw_ver_str);
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -27,6 +27,7 @@
#include <linux/vmalloc.h>
#include <linux/wl12xx.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include "wlcore.h"
#include "debug.h"
@@ -516,7 +517,7 @@ static int wlcore_irq_locked(struct wl12
* In case edge triggered interrupt must be used, we cannot iterate
* more than once without introducing race conditions with the hardirq.
*/
- if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
+ if (wl->irq_flags & IRQF_TRIGGER_RISING)
loopcount = 1;
wl1271_debug(DEBUG_IRQ, "IRQ work");
@@ -5766,7 +5767,6 @@ struct ieee80211_hw *wlcore_alloc_hw(siz
wl->ap_ps_map = 0;
wl->ap_fw_ps_map = 0;
wl->quirks = 0;
- wl->platform_quirks = 0;
wl->system_hlid = WL12XX_SYSTEM_HLID;
wl->active_sta_count = 0;
wl->active_link_count = 0;
@@ -5902,7 +5902,7 @@ static void wlcore_nvs_cb(const struct f
struct platform_device *pdev = wl->pdev;
struct wlcore_platdev_data *pdev_data = pdev->dev.platform_data;
struct wl12xx_platform_data *pdata = pdev_data->pdata;
- unsigned long irqflags;
+
int ret;
if (fw) {
@@ -5929,16 +5929,15 @@ static void wlcore_nvs_cb(const struct f
wlcore_adjust_conf(wl);
wl->irq = platform_get_irq(pdev, 0);
- wl->platform_quirks = pdata->platform_quirks;
wl->if_ops = pdev_data->if_ops;
- if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
- irqflags = IRQF_TRIGGER_RISING;
- else
- irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
+ wl->irq_flags = irq_get_trigger_type(wl->irq);
+
+ /* Since we don't use the primary handler, we must set ONESHOT */
+ wl->irq_flags |= IRQF_ONESHOT;
ret = request_threaded_irq(wl->irq, NULL, wlcore_irq,
- irqflags, pdev->name, wl);
+ wl->irq_flags, pdev->name, wl);
if (ret < 0) {
wl1271_error("request_irq() failed: %d", ret);
goto out_free_nvs;
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -185,6 +185,8 @@ struct wl1271 {
int irq;
+ int irq_flags;
+
spinlock_t wl_lock;
enum wlcore_state state;
@@ -384,9 +386,6 @@ struct wl1271 {
/* Quirks of specific hardware revisions */
unsigned int quirks;
- /* Platform limitations */
- unsigned int platform_quirks;
-
/* number of currently active RX BA sessions */
int ba_rx_session_count;
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -59,13 +59,9 @@ struct wl12xx_platform_data {
int irq;
int board_ref_clock;
int board_tcxo_clock;
- unsigned long platform_quirks;
bool pwr_in_suspend;
};
-/* Platform does not support level trigger interrupts */
-#define WL12XX_PLATFORM_QUIRK_EDGE_IRQ BIT(0)
-
#ifdef CONFIG_WILINK_PLATFORM_DATA
int wl12xx_set_platform_data(const struct wl12xx_platform_data *data);