openwrt/target/linux/ramips/dts/WHR-G300N.dts

87 lines
1.4 KiB
Plaintext

/dts-v1/;
/include/ "rt3050.dtsi"
/ {
compatible = "WHR-G300N", "ralink,rt3052-soc";
model = "Buffalo WHR-G300N";
palmbus@10000000 {
sysc@0 {
ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
};
ethernet@10100000 {
status = "okay";
};
esw@10110000 {
status = "okay";
ralink,portmap = <0x2f>;
};
gpio-leds {
compatible = "gpio-leds";
diag {
label = "whr-g300n:red:diag";
gpios = <&gpio0 7 1>;
};
router {
label = "whr-g300n:green:router";
gpios = <&gpio0 9 1>;
};
security {
label = "whr-g300n:amber:security";
gpios = <&gpio0 14 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
aoss {
label = "aoss";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
router-off {
label = "router-off";
gpios = <&gpio0 11 1>;
linux,code = <0x102>;
};
router-on {
label = "router-on";
gpios = <&gpio0 8 1>;
linux,code = <0x103>;
};
};
wmac@10180000 {
status = "okay";
};
};