openwrt/target/linux/ramips/patches-3.8/0034-DT-MIPS-ralink-add-RT2...

161 lines
3.7 KiB
Diff

From b3cda181b5f9986b05bd95ee322504a8f2ed0b69 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 12 Apr 2013 06:27:37 +0000
Subject: [PATCH 34/79] DT: MIPS: ralink: add RT2880 dts files
Add a dtsi file for RT2880 SoC and a sample dts file.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Patchwork: http://patchwork.linux-mips.org/patch/5188/
---
arch/mips/ralink/Kconfig | 4 +++
arch/mips/ralink/dts/Makefile | 1 +
arch/mips/ralink/dts/rt2880.dtsi | 58 ++++++++++++++++++++++++++++++++++
arch/mips/ralink/dts/rt2880_eval.dts | 46 +++++++++++++++++++++++++++
4 files changed, 109 insertions(+)
create mode 100644 arch/mips/ralink/dts/rt2880.dtsi
create mode 100644 arch/mips/ralink/dts/rt2880_eval.dts
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 86f6c77..2f6fbb8 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -34,6 +34,10 @@ choice
config DTB_RT_NONE
bool "None"
+ config DTB_RT2880_EVAL
+ bool "RT2880 eval kit"
+ depends on SOC_RT288X
+
config DTB_RT305X_EVAL
bool "RT305x eval kit"
depends on SOC_RT305X
diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
index 1a69fb3..f635a01 100644
--- a/arch/mips/ralink/dts/Makefile
+++ b/arch/mips/ralink/dts/Makefile
@@ -1 +1,2 @@
+obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
diff --git a/arch/mips/ralink/dts/rt2880.dtsi b/arch/mips/ralink/dts/rt2880.dtsi
new file mode 100644
index 0000000..182afde
--- /dev/null
+++ b/arch/mips/ralink/dts/rt2880.dtsi
@@ -0,0 +1,58 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,rt2880-soc";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips4KEc";
+ };
+ };
+
+ cpuintc: cpuintc@0 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ palmbus@300000 {
+ compatible = "palmbus";
+ reg = <0x300000 0x200000>;
+ ranges = <0x0 0x300000 0x1FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc@0 {
+ compatible = "ralink,rt2880-sysc";
+ reg = <0x0 0x100>;
+ };
+
+ intc: intc@200 {
+ compatible = "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ memc@300 {
+ compatible = "ralink,rt2880-memc";
+ reg = <0x300 0x100>;
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <8>;
+
+ reg-shift = <2>;
+ };
+ };
+};
diff --git a/arch/mips/ralink/dts/rt2880_eval.dts b/arch/mips/ralink/dts/rt2880_eval.dts
new file mode 100644
index 0000000..322d700
--- /dev/null
+++ b/arch/mips/ralink/dts/rt2880_eval.dts
@@ -0,0 +1,46 @@
+/dts-v1/;
+
+/include/ "rt2880.dtsi"
+
+/ {
+ compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc";
+ model = "Ralink RT2880 evaluation board";
+
+ memory@0 {
+ reg = <0x8000000 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x400000>;
+
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "calibration";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
--
1.7.10.4