mirror of https://github.com/hak5/openwrt.git
126 lines
3.8 KiB
Diff
126 lines
3.8 KiB
Diff
From c7045330c5976eb31bd79bc57c5db684588d595e Mon Sep 17 00:00:00 2001
|
|
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
|
|
Date: Mon, 7 Oct 2013 10:44:55 +0300
|
|
Subject: [PATCH 158/182] usb: dwc3: qcom: Add device tree binding
|
|
|
|
QCOM USB3.0 core wrapper consist of USB3.0 IP from Synopsys
|
|
(SNPS) and HS, SS PHY's control and configuration registers.
|
|
|
|
It could operate in device mode (SS, HS, FS) and host
|
|
mode (SS, HS, FS, LS).
|
|
|
|
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
|
|
Acked-by: Stephen Warren <swarren@nvidia.com>
|
|
---
|
|
.../devicetree/bindings/usb/qcom,dwc3.txt | 104 ++++++++++++++++++++
|
|
1 file changed, 104 insertions(+)
|
|
create mode 100644 Documentation/devicetree/bindings/usb/qcom,dwc3.txt
|
|
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
|
|
@@ -0,0 +1,104 @@
|
|
+Qualcomm SuperSpeed DWC3 USB SoC controller
|
|
+
|
|
+
|
|
+QCOM DWC3 Highspeed USB PHY
|
|
+========================
|
|
+Required properities:
|
|
+- compatible: should contain "qcom,dwc3-hsphy";
|
|
+- reg: offset and length of the register set in the memory map
|
|
+- clocks: A list of phandle + clock-specifier pairs for the
|
|
+ clocks listed in clock-names
|
|
+- clock-names: Should contain the following:
|
|
+ "utmi" UTMI clock
|
|
+- v1p8-supply: phandle to the regulator for the 1.8v supply to HSPHY.
|
|
+- v3p3-supply: phandle to the regulator for the 3.3v supply to HSPHY.
|
|
+- vbus-supply: phandle to the regulator for the vbus supply for host
|
|
+ mode.
|
|
+- vddcx-supply: phandle to the regulator for the vdd supply for HSPHY
|
|
+ digital circuit operation.
|
|
+
|
|
+Optional clocks:
|
|
+ "xo" External reference clock
|
|
+
|
|
+
|
|
+QCOM DWC3 Superspeed USB PHY
|
|
+=========================
|
|
+Required properities:
|
|
+- compatible: should contain "qcom,dwc3-ssphy";
|
|
+- reg: offset and length of the register set in the memory map
|
|
+- clocks: A list of phandle + clock-specifier pairs for the
|
|
+ clocks listed in clock-names
|
|
+- clock-names: Should contain the following:
|
|
+ "ref" Reference clock used in host mode.
|
|
+- v1p8-supply: phandle to the regulator for the 1.8v supply to HSPHY.
|
|
+- vddcx-supply: phandle to the regulator for the vdd supply for HSPHY
|
|
+ digital circuit operation.
|
|
+
|
|
+Optional clocks:
|
|
+ "xo" External reference clock
|
|
+
|
|
+QCOM DWC3 controller wrapper
|
|
+===========================
|
|
+Required properties:
|
|
+- compatible: should contain "qcom,dwc3"
|
|
+- clocks: A list of phandle + clock-specifier pairs for the
|
|
+ clocks listed in clock-names
|
|
+- clock-names: Should contain the following:
|
|
+ "core" Master/Core clock, have to be >= 125 MHz for SS
|
|
+ operation and >= 60MHz for HS operation
|
|
+
|
|
+Optional clocks:
|
|
+ "iface" System bus AXI clock. Not present on all platforms
|
|
+ "sleep" Sleep clock, used when USB3 core goes into low
|
|
+ power mode (U3).
|
|
+
|
|
+Optional regulator:
|
|
+- gdsc-supply: phandle to the regulator from globally distributed
|
|
+ switch controller
|
|
+
|
|
+Required child node:
|
|
+A child node must exist to represent the core DWC3 IP block. The name of
|
|
+the node is not important. The content of the node is defined in dwc3.txt.
|
|
+
|
|
+Example device nodes:
|
|
+
|
|
+ hs_phy_0: phy@110f8800 {
|
|
+ compatible = "qcom,dwc3-hsphy";
|
|
+ reg = <0x110f8800 0x30>;
|
|
+ clocks = <&gcc USB30_0_UTMI_CLK>;
|
|
+ clock-names = "utmi";
|
|
+
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ ss_phy_0: phy@110f8830 {
|
|
+ compatible = "qcom,dwc3-ssphy";
|
|
+ reg = <0x110f8830 0x30>;
|
|
+
|
|
+ clocks = <&gcc USB30_0_MASTER_CLK>;
|
|
+ clock-names = "ref";
|
|
+
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ usb3_0: usb30@0 {
|
|
+ compatible = "qcom,dwc3";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ clocks = <&gcc USB30_0_MASTER_CLK>;
|
|
+ clock-names = "core";
|
|
+
|
|
+ ranges;
|
|
+
|
|
+ status = "disabled";
|
|
+
|
|
+ dwc3@11000000 {
|
|
+ compatible = "snps,dwc3";
|
|
+ reg = <0x11000000 0xcd00>;
|
|
+ interrupts = <0 110 0x4>;
|
|
+ usb-phy = <&hs_phy_0>, <&ss_phy_0>;
|
|
+ phy-names = "usb2-phy", "usb3-phy";
|
|
+ tx-fifo-resize;
|
|
+ dr_mode = "host";
|
|
+ };
|
|
+ };
|