mirror of https://github.com/hak5/openwrt.git
164 lines
4.3 KiB
Diff
164 lines
4.3 KiB
Diff
Allow registering PCI devices after early boot.
|
|
|
|
This is an ugly hack and needs to be rewritten before going upstream.
|
|
Index: linux-2.6.25.4/arch/mips/pci/pci.c
|
|
===================================================================
|
|
--- linux-2.6.25.4.orig/arch/mips/pci/pci.c
|
|
+++ linux-2.6.25.4/arch/mips/pci/pci.c
|
|
@@ -21,6 +21,17 @@
|
|
*/
|
|
int pci_probe_only;
|
|
|
|
+/*
|
|
+ * Indicate whether PCI-bios init was already done.
|
|
+ */
|
|
+static int pcibios_init_done;
|
|
+
|
|
+/*
|
|
+ * The currently used busnumber.
|
|
+ */
|
|
+static int next_busno;
|
|
+static int need_domain_info;
|
|
+
|
|
#define PCI_ASSIGN_ALL_BUSSES 1
|
|
|
|
unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES;
|
|
@@ -75,8 +86,32 @@ pcibios_align_resource(void *data, struc
|
|
res->start = start;
|
|
}
|
|
|
|
-void __devinit register_pci_controller(struct pci_controller *hose)
|
|
+/* Most MIPS systems have straight-forward swizzling needs. */
|
|
+
|
|
+static inline u8 bridge_swizzle(u8 pin, u8 slot)
|
|
+{
|
|
+ return (((pin - 1) + slot) % 4) + 1;
|
|
+}
|
|
+
|
|
+static u8 common_swizzle(struct pci_dev *dev, u8 *pinp)
|
|
{
|
|
+ u8 pin = *pinp;
|
|
+
|
|
+ while (dev->bus->parent) {
|
|
+ pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
|
|
+ /* Move up the chain of bridges. */
|
|
+ dev = dev->bus->self;
|
|
+ }
|
|
+ *pinp = pin;
|
|
+
|
|
+ /* The slot is the slot of the last bridge. */
|
|
+ return PCI_SLOT(dev->devfn);
|
|
+}
|
|
+
|
|
+void register_pci_controller(struct pci_controller *hose)
|
|
+{
|
|
+ struct pci_bus *bus;
|
|
+
|
|
if (request_resource(&iomem_resource, hose->mem_resource) < 0)
|
|
goto out;
|
|
if (request_resource(&ioport_resource, hose->io_resource) < 0) {
|
|
@@ -84,9 +119,6 @@ void __devinit register_pci_controller(s
|
|
goto out;
|
|
}
|
|
|
|
- *hose_tail = hose;
|
|
- hose_tail = &hose->next;
|
|
-
|
|
/*
|
|
* Do not panic here but later - this might hapen before console init.
|
|
*/
|
|
@@ -94,41 +126,47 @@ void __devinit register_pci_controller(s
|
|
printk(KERN_WARNING
|
|
"registering PCI controller with io_map_base unset\n");
|
|
}
|
|
- return;
|
|
|
|
-out:
|
|
- printk(KERN_WARNING
|
|
- "Skipping PCI bus scan due to resource conflict\n");
|
|
-}
|
|
+ if (pcibios_init_done) {
|
|
+ //TODO
|
|
|
|
-/* Most MIPS systems have straight-forward swizzling needs. */
|
|
+ printk(KERN_INFO "Registering a PCI bus after boot\n");
|
|
|
|
-static inline u8 bridge_swizzle(u8 pin, u8 slot)
|
|
-{
|
|
- return (((pin - 1) + slot) % 4) + 1;
|
|
-}
|
|
+ if (!hose->iommu)
|
|
+ PCI_DMA_BUS_IS_PHYS = 1;
|
|
|
|
-static u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
|
|
-{
|
|
- u8 pin = *pinp;
|
|
+ bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
|
|
+ hose->bus = bus;
|
|
+ need_domain_info = need_domain_info || hose->index;
|
|
+ hose->need_domain_info = need_domain_info;
|
|
+ if (bus) {
|
|
+ next_busno = bus->subordinate + 1;
|
|
+ /* Don't allow 8-bit bus number overflow inside the hose -
|
|
+ reserve some space for bridges. */
|
|
+ if (next_busno > 224) {
|
|
+ next_busno = 0;
|
|
+ need_domain_info = 1;
|
|
+ }
|
|
+ }
|
|
+ if (!pci_probe_only)
|
|
+ pci_assign_unassigned_resources();
|
|
+ pci_fixup_irqs(common_swizzle, pcibios_map_irq);
|
|
+ } else {
|
|
+ *hose_tail = hose;
|
|
+ hose_tail = &hose->next;
|
|
+ }
|
|
|
|
- while (dev->bus->parent) {
|
|
- pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
|
|
- /* Move up the chain of bridges. */
|
|
- dev = dev->bus->self;
|
|
- }
|
|
- *pinp = pin;
|
|
+ return;
|
|
|
|
- /* The slot is the slot of the last bridge. */
|
|
- return PCI_SLOT(dev->devfn);
|
|
+out:
|
|
+ printk(KERN_WARNING
|
|
+ "Skipping PCI bus scan due to resource conflict\n");
|
|
}
|
|
|
|
static int __init pcibios_init(void)
|
|
{
|
|
struct pci_controller *hose;
|
|
struct pci_bus *bus;
|
|
- int next_busno;
|
|
- int need_domain_info = 0;
|
|
|
|
/* Scan all of the recorded PCI controllers. */
|
|
for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
|
|
@@ -157,6 +195,7 @@ static int __init pcibios_init(void)
|
|
if (!pci_probe_only)
|
|
pci_assign_unassigned_resources();
|
|
pci_fixup_irqs(common_swizzle, pcibios_map_irq);
|
|
+ pcibios_init_done = 1;
|
|
|
|
return 0;
|
|
}
|
|
Index: linux-2.6.25.4/drivers/ssb/main.c
|
|
===================================================================
|
|
--- linux-2.6.25.4.orig/drivers/ssb/main.c
|
|
+++ linux-2.6.25.4/drivers/ssb/main.c
|
|
@@ -1191,9 +1191,7 @@ static int __init ssb_modinit(void)
|
|
/* ssb must be initialized after PCI but before the ssb drivers.
|
|
* That means we must use some initcall between subsys_initcall
|
|
* and device_initcall. */
|
|
-//FIXME on embedded we need to be early to make sure we can register
|
|
-// a new PCI bus, if needed.
|
|
-subsys_initcall(ssb_modinit);
|
|
+fs_initcall(ssb_modinit);
|
|
|
|
static void __exit ssb_modexit(void)
|
|
{
|