openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Michael Büsch e7c83f6d59 Add support for enabling early printk. Currently only for ARM, because I don't know what EARLY_PRINTK depends on on other architectures. SVN-Revision: 23071		2010-09-15 16:27:02 +00:00
docs	docs: fix a counting fail	2010-05-29 13:11:48 +00:00
include	opkg: - implement --add-dest and --add-arch commandline options, this allows to run entirely without configuration - tweak default config location patch to not require a config in offline root mode - rename --force-run-hooks option to --force-postinstall, its a more appropriate name - utilize new opkg commandline options in package-ipkg.mk and remove config file generation	2010-09-12 21:16:02 +00:00
package	Support for Solos PCI ADSL2+ modem This driver is used by Traverse Technologies' Geos ADSL2+ x86 router:	2010-09-15 03:52:13 +00:00
scripts	Implement an ARCH_PACKAGES variable which defaults to BOARD but can be overridden on a per-subtarget basis. This is intended for targets such as adm5120 and malta which support both big and little endianess and will replace the target specific exceptions in package-defaults and Image Builder.	2010-09-12 20:49:54 +00:00
target	generic: add support for the EON EN25F32 flash chip	2010-09-14 12:03:01 +00:00
toolchain	toolchain/gcc: fix -Os recursion on ARMv5 for gcc 4.5.0 & 4.5.1 (http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44392 )	2010-09-04 17:00:55 +00:00
tools	revert r23048 for now until Darwin compile issues have been sorted out (#7934 )	2010-09-13 18:50:41 +00:00
.gitignore	.gitignore: Undo accidental commit.	2010-05-10 17:59:05 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	Add support for enabling early printk. Currently only for ARM, because I don't know what EARLY_PRINTK depends on on other architectures.	2010-09-15 16:27:02 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	Add lxde feed to feeds.conf.default	2010-08-12 19:03:44 +00:00
rules.mk	drop the usr/ prefix when scanning for libgcc.a	2010-09-12 22:19:29 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org