mirror of https://github.com/hak5/openwrt.git
109 lines
3.5 KiB
Diff
109 lines
3.5 KiB
Diff
--- a/drivers/pci/host/Kconfig
|
|
+++ b/drivers/pci/host/Kconfig
|
|
@@ -220,4 +220,9 @@ config VMD
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called vmd.
|
|
|
|
+config PCIE_OXNAS
|
|
+ bool "PLX Oxnas PCIe controller"
|
|
+ depends on ARCH_OXNAS
|
|
+ select PCIEPORTBUS
|
|
+
|
|
endmenu
|
|
--- a/drivers/pci/host/Makefile
|
|
+++ b/drivers/pci/host/Makefile
|
|
@@ -20,6 +20,7 @@ obj-$(CONFIG_PCIE_ALTERA) += pcie-altera
|
|
obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
|
|
obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
|
|
obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
|
|
+obj-$(CONFIG_PCIE_OXNAS) += pcie-oxnas.o
|
|
obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
|
|
obj-$(CONFIG_VMD) += vmd.o
|
|
|
|
--- a/arch/arm/boot/dts/ox820.dtsi
|
|
+++ b/arch/arm/boot/dts/ox820.dtsi
|
|
@@ -307,6 +307,83 @@
|
|
reg = <0x1000 0x1000>,
|
|
<0x100 0x500>;
|
|
};
|
|
+
|
|
+ pcie0: pcie-controller@c00000 {
|
|
+ compatible = "plxtech,nas782x-pcie";
|
|
+ device_type = "pci";
|
|
+ #address-cells = <3>;
|
|
+ #size-cells = <2>;
|
|
+
|
|
+ /* flag & space bus address host address size */
|
|
+ ranges = < 0x82000000 0 0x48000000 0x48000000 0 0x2000000
|
|
+ 0xC2000000 0 0x4A000000 0x4A000000 0 0x1E00000
|
|
+ 0x81000000 0 0x4BE00000 0x4BE00000 0 0x0100000
|
|
+ 0x80000000 0 0x4BF00000 0x4BF00000 0 0x0100000>;
|
|
+
|
|
+ bus-range = <0x00 0x7f>;
|
|
+
|
|
+ /* cfg inbound translator phy*/
|
|
+ reg = <0x47C00000 0x1000>, <0x47D00000 0x100>, <0x44A00000 0x10>;
|
|
+
|
|
+ #interrupt-cells = <1>;
|
|
+ /* wild card mask, match all bus address & interrupt specifier */
|
|
+ /* format: bus address mask, interrupt specifier mask */
|
|
+ /* each bit 1 means need match, 0 means ignored when match */
|
|
+ interrupt-map-mask = <0 0 0 0>;
|
|
+ /* format: a list of: bus address, interrupt specifier,
|
|
+ * parent interrupt controller & specifier */
|
|
+ interrupt-map = <0 0 0 0 &gic 0 19 0x304>;
|
|
+
|
|
+ gpios = <&gpio1 12 0>;
|
|
+ clocks = <&stdclk CLK_820_PCIEA>, <&pllb>;
|
|
+ clock-names = "pcie", "busclk";
|
|
+ resets = <&reset RESET_PCIEA>, <&reset RESET_PCIEPHY>;
|
|
+ reset-names = "pcie", "phy";
|
|
+
|
|
+ plxtech,pcie-hcsl-bit = <2>;
|
|
+ plxtech,pcie-ctrl-offset = <0x120>;
|
|
+ plxtech,pcie-outbound-offset = <0x138>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ pcie1: pcie-controller@e00000 {
|
|
+ compatible = "plxtech,nas782x-pcie";
|
|
+ device_type = "pci";
|
|
+ #address-cells = <3>;
|
|
+ #size-cells = <2>;
|
|
+
|
|
+ /* flag & space bus address host address size */
|
|
+ ranges = < 0x82000000 0 0x4C000000 0x4C000000 0 0x2000000
|
|
+ 0xC2000000 0 0x4E000000 0x4E000000 0 0x1E00000
|
|
+ 0x81000000 0 0x4FE00000 0x4FE00000 0 0x0100000
|
|
+ 0x80000000 0 0x4FF00000 0x4FF00000 0 0x0100000>;
|
|
+
|
|
+ bus-range = <0x80 0xff>;
|
|
+
|
|
+ /* cfg inbound translator phy*/
|
|
+ reg = <0x47E00000 0x1000>, <0x47F00000 0x100>, <0x44A00000 0x10>;
|
|
+
|
|
+ #interrupt-cells = <1>;
|
|
+ /* wild card mask, match all bus address & interrupt specifier */
|
|
+ /* format: bus address mask, interrupt specifier mask */
|
|
+ /* each bit 1 means need match, 0 means ignored when match */
|
|
+ interrupt-map-mask = <0 0 0 0>;
|
|
+ /* format: a list of: bus address, interrupt specifier,
|
|
+ * parent interrupt controller & specifier */
|
|
+ interrupt-map = <0 0 0 0 &gic 0 20 0x304>;
|
|
+
|
|
+ /* gpios = <&gpio1 12 0>; */
|
|
+ clocks = <&stdclk CLK_820_PCIEB>, <&pllb>;
|
|
+ clock-names = "pcie", "busclk";
|
|
+ resets = <&reset RESET_PCIEB>, <&reset RESET_PCIEPHY>;
|
|
+ reset-names = "pcie", "phy";
|
|
+
|
|
+ plxtech,pcie-hcsl-bit = <3>;
|
|
+ plxtech,pcie-ctrl-offset = <0x124>;
|
|
+ plxtech,pcie-outbound-offset = <0x174>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
};
|
|
};
|
|
};
|