This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org
 
 
 
 
 
 
Go to file
Felix Fietkau dfa7618bd6 fix the image builder
SVN-Revision: 9549
2007-11-14 23:11:07 +00:00
docs Document the IPv6 connectivity with OpenWrt. 2007-10-26 16:21:03 +00:00
include fix the image builder 2007-11-14 23:11:07 +00:00
package Add detection support for Buffalo WHR-G125 from #2611 2007-11-13 07:39:29 +00:00
scripts fix image names in arm-magic.sh (closes: #2682) 2007-11-11 13:37:37 +00:00
target fix the image builder 2007-11-14 23:11:07 +00:00
toolchain revert abi changes in uClibc - on hold for 7.11, will be added again with the uclibc upgrade for 8.01 2007-11-09 13:20:21 +00:00
tools fix some definitions in the ZyXEL tool 2007-11-03 17:00:57 +00:00
.gitignore add package/feeds to .gitignore 2007-10-13 02:05:06 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in add possibility to set default .config values 2007-10-14 02:15:37 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile fix parallel build issues 2007-11-04 11:42:47 +00:00
README add information about the tex4ht requirement for the docs 2007-02-26 01:06:41 +00:00
feeds.conf add initial version of a package feeds management script 2007-09-23 02:39:01 +00:00
rules.mk add config symbols for the kernel version 2007-11-10 15:22:53 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org