openwrt

History

Imre Kaloz 4f06ba0727 malta: copy initramfs images Malta ramdisk images are no longer copied to output due to a recent change. This change reimplements copying of ramdisk images for Malta builds. Signed-off-by: Eric Schultz <eschultz@prplfoundation.org> SVN-Revision: 43970		2015-01-14 12:09:33 +00:00
..
base-files/etc	allow any console to be used	2011-06-16 14:34:44 +00:00
be	build: unify mips target cflags	2013-09-26 17:53:14 +00:00
be64	build: unify mips target cflags	2013-09-26 17:53:14 +00:00
image	malta: copy initramfs images	2015-01-14 12:09:33 +00:00
le	build: unify mips target cflags	2013-09-26 17:53:14 +00:00
le64	build: unify mips target cflags	2013-09-26 17:53:14 +00:00
Makefile	malta: set 3.14 as default	2014-12-01 18:46:29 +00:00
README	malta: update README	2013-07-19 17:12:47 +00:00
config-3.10	all targets: remove all =m kernel config symbols	2015-01-05 13:02:44 +00:00
config-3.14	all targets: remove all =m kernel config symbols	2015-01-05 13:02:44 +00:00

README

This Malta target is intended to be used with the Qemu emulator. It can be used
to prototype an OpenWrt firmware for MIPS processors. One could also use it to
troubleshoot MIPS applications without access to real hardware.

To use the images built by OpenWrt with qemu, use the following commands:

For the little-endian image:
qemu-system-mipsel -kernel bin/malta/openwrt-malta-le-vmlinux-initramfs.elf -nographic -m 256

For the big-endian image:
qemu-system-mips -kernel bin/malta/openwrt-malta-be-vmlinux-initramfs.elf -nographic -m 256

and enjoy the system bootin.