openwrt/target/linux/ar71xx/patches-3.14/425-net-phy-at803x-allow-to...

135 lines
3.4 KiB
Diff

--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -12,10 +12,12 @@
*/
#include <linux/phy.h>
+#include <linux/mdio.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/platform_data/phy-at803x.h>
#define AT803X_INTR_ENABLE 0x12
#define AT803X_INTR_STATUS 0x13
@@ -32,10 +34,61 @@
#define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05
#define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8)
+#define AT803X_PCS_SMART_EEE_CTRL3 0x805D
+
+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK 0x3
+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT 12
+#define AT803X_SMART_EEE_CTRL3_LPI_EN BIT(8)
+
+#define AT803X_DEBUG_PORT_ACCESS_OFFSET 0x1D
+#define AT803X_DEBUG_PORT_ACCESS_DATA 0x1E
+
+#define AT803X_DBG0_REG 0x00
+#define AT803X_DBG0_RGMII_RX_CLK_DELAY_EN BIT(8)
+
+#define AT803X_DBG5_REG 0x05
+#define AT803X_DBG5_RGMII_TX_CLK_DELAY_EN BIT(8)
+
MODULE_DESCRIPTION("Atheros 803x PHY driver");
MODULE_AUTHOR("Matus Ujhelyi");
MODULE_LICENSE("GPL");
+static u16
+at803x_dbg_reg_rmw(struct phy_device *phydev, u16 reg, u16 clear, u16 set)
+{
+ struct mii_bus *bus = phydev->bus;
+ int val;
+
+ mutex_lock(&bus->mdio_lock);
+
+ bus->write(bus, phydev->addr, AT803X_DEBUG_PORT_ACCESS_OFFSET, reg);
+ val = bus->read(bus, phydev->addr, AT803X_DEBUG_PORT_ACCESS_DATA);
+ if (val < 0) {
+ val = 0xffff;
+ goto out;
+ }
+
+ val &= ~clear;
+ val |= set;
+ bus->write(bus, phydev->addr, AT803X_DEBUG_PORT_ACCESS_DATA, val);
+
+out:
+ mutex_unlock(&bus->mdio_lock);
+ return val;
+}
+
+static inline void
+at803x_dbg_reg_set(struct phy_device *phydev, u16 reg, u16 set)
+{
+ at803x_dbg_reg_rmw(phydev, reg, 0, set);
+}
+
+static inline void
+at803x_dbg_reg_clr(struct phy_device *phydev, u16 reg, u16 clear)
+{
+ at803x_dbg_reg_rmw(phydev, reg, clear, 0);
+}
+
static int at803x_set_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
@@ -139,8 +192,16 @@ static int at803x_resume(struct phy_devi
return 0;
}
+static void at803x_disable_smarteee(struct phy_device *phydev)
+{
+ phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3,
+ 1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT);
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
+}
+
static int at803x_config_init(struct phy_device *phydev)
{
+ struct at803x_platform_data *pdata;
int val;
int ret;
u32 features;
@@ -188,6 +249,26 @@ static int at803x_config_init(struct phy
return ret;
}
+ pdata = dev_get_platdata(&phydev->dev);
+ if (pdata) {
+ if (pdata->disable_smarteee)
+ at803x_disable_smarteee(phydev);
+
+ if (pdata->enable_rgmii_rx_delay)
+ at803x_dbg_reg_set(phydev, AT803X_DBG0_REG,
+ AT803X_DBG0_RGMII_RX_CLK_DELAY_EN);
+ else
+ at803x_dbg_reg_clr(phydev, AT803X_DBG0_REG,
+ AT803X_DBG0_RGMII_RX_CLK_DELAY_EN);
+
+ if (pdata->enable_rgmii_tx_delay)
+ at803x_dbg_reg_set(phydev, AT803X_DBG5_REG,
+ AT803X_DBG5_RGMII_TX_CLK_DELAY_EN);
+ else
+ at803x_dbg_reg_clr(phydev, AT803X_DBG5_REG,
+ AT803X_DBG5_RGMII_TX_CLK_DELAY_EN);
+ }
+
return 0;
}
--- /dev/null
+++ b/include/linux/platform_data/phy-at803x.h
@@ -0,0 +1,10 @@
+#ifndef _PHY_AT803X_PDATA_H
+#define _PHY_AT803X_PDATA_H
+
+struct at803x_platform_data {
+ int disable_smarteee:1;
+ int enable_rgmii_tx_delay:1;
+ int enable_rgmii_rx_delay:1;
+};
+
+#endif /* _PHY_AT803X_PDATA_H */