openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Vasilis Tsiligiannis de0324cfb0 qos-scripts: Fix generation of IMQ firewall rules on halfduplex mode (#7800 ) SVN-Revision: 23227		2010-10-04 21:25:48 +00:00
docs	docs: fix a counting fail	2010-05-29 13:11:48 +00:00
include	correct default package status info (install -> unknown) - fixes "opkg_conf_write_status_files: Internal error: package ... has a NULL dest"	2010-10-04 17:20:49 +00:00
package	qos-scripts: Fix generation of IMQ firewall rules on halfduplex mode (#7800 )	2010-10-04 21:25:48 +00:00
scripts	feeds: restore previously active feed after install_package(), fixes install all case for packages with inter-feed dependencies	2010-10-02 02:37:27 +00:00
target	kernel: fix some build warnings with kernel 2.6.36	2010-10-04 20:43:07 +00:00
toolchain	gcc 4.4.5 support	2010-10-04 12:21:58 +00:00
tools	mtd-utils: refresh patches again	2010-10-03 12:15:04 +00:00
.gitignore	.gitignore: Undo accidental commit.	2010-05-10 17:59:05 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	optionally support parallel toolchain build. This defaults to off, because certain toolchain versions are known to break on parallel build. However, it significantly speeds up the build and latest versions of the tools do compile fine.	2010-10-03 12:54:07 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	Add lxde feed to feeds.conf.default	2010-08-12 19:03:44 +00:00
rules.mk	drop the usr/ prefix when scanning for libgcc.a	2010-09-12 22:19:29 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org