openwrt/target/linux/brcm63xx/dts/ar-5387un.dts

98 lines
1.6 KiB
Plaintext

/dts-v1/;
#include "bcm6328.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Comtrend AR-5387un";
compatible = "comtrend,ar-5387un", "brcm,bcm6328";
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&pinctrl 23 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
inet_red {
label = "AR-5387un:red:inet";
gpios = <&pinctrl 1 0>;
};
power_red {
label = "AR-5387un:red:power";
gpios = <&pinctrl 4 0>;
};
inet_green {
label = "AR-5387un:green:inet";
gpios = <&pinctrl 7 0>;
};
power_green {
label = "AR-5387un:green:power";
gpios = <&pinctrl 8 0>;
default-state = "on";
};
dsl_green {
label = "AR-5387un:green:dsl";
gpios = <&pinctrl 11 1>;
};
};
};
&hsspi {
status = "ok";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <16666667>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
linux@10000 {
reg = <0x010000 0xfe0000>;
label = "linux";
compatible = "brcm,bcm963xx-imagetag";
};
nvram@ff0000 {
reg = <0xff0000 0x010000>;
label = "nvram";
};
};
};
};
&uart0 {
status = "ok";
};