openwrt/target/linux/ramips/dts/BR-6475ND.dts

172 lines
2.7 KiB
Plaintext

/dts-v1/;
/include/ "rt3883.dtsi"
/ {
compatible = "BR-6475ND", "ralink,rt3883-soc";
model = "Edimax BR-6475nD";
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "spi", "jtag", "uartf";
ralink,function = "gpio";
};
};
};
palmbus@10000000 {
timer@100 {
status = "okay";
};
gpio1: gpio@638 {
status = "okay";
};
uartlite@c00 {
status = "okay";
};
};
ethernet@10100000 {
status = "okay";
port@0 {
ralink,fixed-link = <1000 1 1 1>;
};
};
pci@10140000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pci_pins>;
pci_pins: pci {
pci {
ralink,group = "pci";
ralink,function = "pci-fnc";
};
};
host-bridge {
pci-bridge@1 {
status = "okay";
wmac@0,0 {
compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
reg = < 0x10000 0 0 0 0 >;
ralink,eeprom = "soc_wmac.eeprom";
};
};
};
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x00000000 0x00030000>;
label = "u-boot";
read-only;
};
partition@30000 {
reg = <0x00030000 0x00010000>;
label = "nvram";
read-only;
};
factory: partition@40000 {
reg = <0x00040000 0x00010000>;
label = "factory";
read-only;
};
partition@50000 {
reg = <0x00050000 0x00020000>;
label = "devdata";
read-only;
};
partition@70000 {
reg = <0x00070000 0x00790000>;
label = "firmware";
};
partition@170000 {
reg = <0x00270000 0x00590000>;
label = "rootfs";
};
};
rtl8367 {
compatible = "realtek,rtl8367";
gpio-sda = <&gpio0 5 0>;
gpio-sck = <&gpio0 4 0>;
realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio0 7 1>;
linux,code = <0x198>;
};
rfkill {
label = "rfkill";
gpios = <&gpio0 9 1>;
linux,input-type = <5>;
linux,code = <0xf7>;
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "edimax:green:power";
gpios = <&gpio0 10 1>;
};
wlan {
label = "edimax:amber:wlan";
gpios = <&gpio0 11 1>;
};
wlan_5ghz {
label = "edimax:amber:wlan_5ghz";
gpios = <&gpio0 14 1>;
};
};
/* Unclear if this is the correct gpio setup; the USB ports are
unpopulated on a stock BR-6475nD, even though the hardware exists
and the headers are there. */
/*
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usb {
gpio-export,name="usb";
gpio-export,output=<0>;
gpios = <&gpio0 19 0>;
};
};
*/
};