openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Felix Fietkau d6ca46cd25 cns3xxx: fix ethernet driver tx completion and queue stop/start SVN-Revision: 33504		2012-09-22 00:34:53 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	make packages depend on +librt and +libpthread by default if eglibc is in use	2012-09-19 15:30:40 +00:00
package	fuse: remove now redundant dependency on +USE_EGLIBC:librt	2012-09-19 15:37:35 +00:00
scripts	fix library bundling when host libraries reside in /lib/tls/ or similar	2012-09-09 22:37:32 +00:00
target	cns3xxx: fix ethernet driver tx completion and queue stop/start	2012-09-22 00:34:53 +00:00
toolchain	uClibc: fix uClibc implementation of eventfd	2012-09-19 15:13:48 +00:00
tools	tools/cmake: enable parallel builds	2012-09-15 14:18:10 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	kernel: enable perf events when enabling profiling, fixes oprofile on arm	2012-09-20 20:27:14 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	abort built in prereq target if there is no site config file for the current target	2012-01-19 12:19:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
rules.mk	do not pass optimization flags in HOST_CPPFLAGS (#12153 )	2012-09-09 21:35:42 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org