mirror of https://github.com/hak5/openwrt.git
376 lines
7.1 KiB
Plaintext
376 lines
7.1 KiB
Plaintext
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
|
* Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#include "qcom-ipq4019.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/soc/qcom,tcsr.h>
|
|
|
|
/ {
|
|
model = "Compex WPJ419";
|
|
compatible = "compex,wpj419", "qcom,ipq4019";
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x10000000>;
|
|
};
|
|
|
|
reserved-memory {
|
|
ranges;
|
|
rsvd1@87000000 {
|
|
/* Reserved for other subsystem */
|
|
reg = <0x87000000 0x500000>;
|
|
no-map;
|
|
};
|
|
wifi_dump@87500000 {
|
|
reg = <0x87500000 0x600000>;
|
|
no-map;
|
|
};
|
|
|
|
rsvd2@87B00000 {
|
|
/* Reserved for other subsystem */
|
|
reg = <0x87B00000 0x500000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1 clk_ignore_unused";
|
|
};
|
|
|
|
soc {
|
|
pinctrl@1000000 {
|
|
mdio_pins: mdio_pinmux {
|
|
mux_1 {
|
|
pins = "gpio6";
|
|
function = "mdio";
|
|
bias-pull-up;
|
|
};
|
|
|
|
mux_2 {
|
|
pins = "gpio7";
|
|
function = "mdc";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
serial_0_pins: serial_pinmux {
|
|
mux {
|
|
pins = "gpio16", "gpio17";
|
|
function = "blsp_uart0";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
serial_1_pins: serial1_pinmux {
|
|
mux {
|
|
pins = "gpio8", "gpio9", "gpio10", "gpio11";
|
|
function = "blsp_uart1";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
spi_0_pins: spi_0_pinmux {
|
|
pinmux {
|
|
function = "blsp_spi0";
|
|
pins = "gpio13", "gpio14", "gpio15";
|
|
bias-disable;
|
|
};
|
|
|
|
pinmux_cs {
|
|
function = "gpio";
|
|
pins = "gpio12";
|
|
bias-disable;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
i2c_0_pins: i2c_0_pinmux {
|
|
mux {
|
|
pins = "gpio20", "gpio21";
|
|
function = "blsp_i2c0";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
nand_pins: nand_pins {
|
|
pullups {
|
|
pins = "gpio52", "gpio53", "gpio58", "gpio59";
|
|
function = "qpic";
|
|
bias-pull-up;
|
|
};
|
|
|
|
pulldowns {
|
|
pins = "gpio54", "gpio55", "gpio56",
|
|
"gpio57", "gpio60", "gpio61",
|
|
"gpio62", "gpio63", "gpio64",
|
|
"gpio65", "gpio66", "gpio67",
|
|
"gpio68", "gpio69";
|
|
function = "qpic";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
led_0_pins: led0_pinmux {
|
|
mux_1 {
|
|
pins = "gpio36";
|
|
function = "led0";
|
|
bias-pull-down;
|
|
};
|
|
mux_2 {
|
|
pins = "gpio40";
|
|
function = "led4";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|
|
|
|
blsp_dma: dma@7884000 {
|
|
status = "okay";
|
|
};
|
|
|
|
spi_0: spi@78b5000 {
|
|
pinctrl-0 = <&spi_0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>;
|
|
num-cs = <2>;
|
|
|
|
flash0@0 {
|
|
reg = <0>;
|
|
compatible = "jedec,spi-nor";
|
|
spi-max-frequency = <24000000>;
|
|
broken-flash-reset;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "0:SBL1";
|
|
reg = <0x000000 0x040000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@40000 {
|
|
label = "0:MIBIB";
|
|
reg = <0x040000 0x020000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@60000 {
|
|
label = "0:QSEE";
|
|
reg = <0x060000 0x060000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@c0000 {
|
|
label = "0:CDT";
|
|
reg = <0x0c0000 0x010000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@d0000 {
|
|
label = "0:DDRPARAMS";
|
|
reg = <0x0d0000 0x010000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@e0000 {
|
|
label = "u-boot-env";
|
|
reg = <0x0e0000 0x010000>;
|
|
};
|
|
|
|
partition@f0000 {
|
|
label = "u-boot";
|
|
reg = <0x0f0000 0x080000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@170000 {
|
|
label = "0:ART";
|
|
reg = <0x170000 0x010000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
|
|
nand@1 {
|
|
reg = <1>;
|
|
status = "okay";
|
|
compatible = "spi-nand";
|
|
spi-max-frequency = <24000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
/* The device has 128MB, but we can only address
|
|
* 64MB because of the bootloader's default settings.
|
|
* This is due to the old mt29f driver,
|
|
* which detected the deivce with only 64MB
|
|
*/
|
|
partition@0 {
|
|
label = "ubi";
|
|
reg = <0x0000000 0x4000000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio@90000 {
|
|
status = "okay";
|
|
pinctrl-0 = <&mdio_pins>;
|
|
pinctrl-names = "default";
|
|
reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
|
|
reset-delay-us = <5000>;
|
|
};
|
|
|
|
ess-psgmii@98000 {
|
|
status = "okay";
|
|
};
|
|
|
|
tcsr@194b000 {
|
|
/* select hostmode */
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x194b000 0x100>;
|
|
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
|
status = "okay";
|
|
};
|
|
|
|
tcsr@1949000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1949000 0x100>;
|
|
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
|
};
|
|
|
|
ess_tcsr@1953000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1953000 0x1000>;
|
|
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
|
};
|
|
|
|
tcsr@1957000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1957000 0x100>;
|
|
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
|
};
|
|
|
|
i2c_0: i2c@78b7000 {
|
|
pinctrl-0 = <&i2c_0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "ok";
|
|
};
|
|
|
|
serial@78af000 {
|
|
pinctrl-0 = <&serial_0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
serial@78b0000 {
|
|
pinctrl-0 = <&serial_1_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
usb3_ss_phy: ssphy@9a000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb3_hs_phy: hsphy@a6000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb3: usb3@8af8800 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb2_hs_phy: hsphy@a8000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb2: usb2@60f8800 {
|
|
status = "okay";
|
|
};
|
|
|
|
cryptobam: dma@8e04000 {
|
|
status = "okay";
|
|
};
|
|
|
|
crypto@8e3a000 {
|
|
status = "okay";
|
|
};
|
|
|
|
watchdog@b017000 {
|
|
status = "okay";
|
|
};
|
|
|
|
ess-switch@c000000 {
|
|
switch_lan_bmp = <0x1e>;
|
|
switch_wan_bmp = <0x20>;
|
|
status = "okay";
|
|
};
|
|
|
|
edma@c080000 {
|
|
status = "okay";
|
|
};
|
|
|
|
qpic_bam: dma@7984000 {
|
|
status = "okay";
|
|
};
|
|
|
|
pcie0: pci@40000000 {
|
|
status = "okay";
|
|
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
|
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
nand: qpic-nand@79b0000 {
|
|
pinctrl-0 = <&nand_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
&gmac0 {
|
|
qcom,phy_mdio_addr = <4>;
|
|
qcom,poll_required = <1>;
|
|
qcom,forced_speed = <1000>;
|
|
qcom,forced_duplex = <1>;
|
|
vlan_tag = <2 0x20>;
|
|
};
|
|
|
|
&gmac1 {
|
|
qcom,phy_mdio_addr = <3>;
|
|
qcom,poll_required = <1>;
|
|
qcom,forced_speed = <1000>;
|
|
qcom,forced_duplex = <1>;
|
|
vlan_tag = <1 0x10>;
|
|
};
|
|
|
|
&wifi0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi1 {
|
|
status = "okay";
|
|
};
|