openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Piotr Dymacz d2c9b169b3 ar71xx: add support for jjPlus JWAP230 jjPlus JWAP230 is based on Qualcomm Atheros QCA9558 + QCA8337. Short specification: - 720/600/200 MHz (CPU/DDR/AHB) - 2x 10/100/1000 Mbps Ethernet - 128 MB of RAM (DDR2) - 16 MB of FLASH - 3T3R 2.4 GHz with external PA (SST12LP15A), up to 28 dBm - 3x MMCX connectors - power input: 802.3at PoE or wide range DC (36-57 V) - optional 802.3af PSE - 1x mini-PCIe connector with PCIe, USB buses and SIM slot - 1x mini-PCIe connector with PCIe bus - 1x USB type-A connector - 6x LED, 1x button (hardware reset) - RS232 (MAX3223) and (E)JTAG headers Default configuration: - WAN on eth1 (RJ45 near LEDs with PoE input) - LAN on eth0 (RJ45 near DC jack) - left top LED set to be status LED - all LEDs configurable form user space Flash instruction (do it under U-Boot, using RS232): 1. tftp 0x80060000 lede-ar71xx-generic-jwap230-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>		2016-07-13 20:03:10 +02:00
config	kernel: Move POSIX ACL and attr support options into submenu	2016-07-05 22:59:14 +02:00
docs	build: Prevent more gzip timestamps	2015-07-14 09:57:45 +00:00
include	kernel: update kernel 4.4 to version 4.4.15	2016-07-13 15:39:15 +02:00
package	uboot-envtools: add support for Wallys DR531	2016-07-13 20:03:10 +02:00
scripts	scripts/getver.sh: fix one more wc -l call	2016-07-13 16:56:41 +02:00
target	ar71xx: add support for jjPlus JWAP230	2016-07-13 20:03:10 +02:00
toolchain	toolchain: skip gcc/minimal for musl	2016-07-07 15:13:40 +02:00
tools	tools: padjffs2: add option to output padding data to stdout	2016-07-11 13:26:33 +02:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	build: add integration for managing opkg package feed keys	2015-04-06 19:39:51 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	branding: add LEDE branding	2016-03-24 22:40:13 +01:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: fix make clean, delete package directories for selected arch	2016-05-11 10:02:36 +02:00
README	README: Update project README	2016-05-12 03:29:36 +02:00
feeds.conf.default	feeds.conf.default: disable management feed	2016-06-13 22:51:42 +02:00
rules.mk	rules.mk: introduce new variable OUTPUT_DIR	2016-04-06 21:49:15 +02:00

README

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org