openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Jo-Philipp Wich d221222907 ppp: unconditionally start pppd with nodefaultroute and usepeerdns (#12580 ) Since the switch to netifd, proto handlers may always set the defaultroute and provide dns server addresses, netifd will decide in the generic code path whether the announced values are masked or not. Additionally protocol handlers should not modify the routing tables themselves and prevent any launched services from doing so. Remove the additional defaultroute and peerdns option handling from the ppp.sh protocol handler and rely on netifd to mask or not mask the values. SVN-Revision: 34536		2012-12-06 18:17:21 +00:00
docs	update switch documentation	2012-10-12 12:13:56 +00:00
include	Revert "include/image.mk: call Image/Build/{cpiogz,targz}"	2012-12-04 22:59:05 +00:00
package	ppp: unconditionally start pppd with nodefaultroute and usepeerdns (#12580 )	2012-12-06 18:17:21 +00:00
scripts	remove support for ubicom32	2012-11-30 10:53:55 +00:00
target	kernel: add missing config symbols	2012-12-06 14:11:16 +00:00
toolchain	toolchain: use file_copy to install the initial gcc files	2012-12-02 12:20:47 +00:00
tools	tools: e2fsprogs: delete doc/ directory after unpacking to ensure that makeinfo is not invoked	2012-12-02 18:35:39 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	Change default TARGET_ROOTFS_RESERVED_PCT to zero to avoid wasted space	2012-12-02 13:04:01 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
rules.mk	rules.mk: don't use $(realpath) in file_copy, the destination directory might not exist yet - spotted while doing a fresh build	2012-12-02 15:15:07 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org