mirror of https://github.com/hak5/openwrt.git
228 lines
7.2 KiB
Diff
228 lines
7.2 KiB
Diff
--- a/drivers/net/ethernet/broadcom/tg3.c
|
|
+++ b/drivers/net/ethernet/broadcom/tg3.c
|
|
@@ -1367,7 +1367,7 @@ static int tg3_mdio_read(struct mii_bus
|
|
|
|
spin_lock_bh(&tp->lock);
|
|
|
|
- if (tg3_readphy(tp, reg, &val))
|
|
+ if (__tg3_readphy(tp, mii_id, reg, &val))
|
|
val = -EIO;
|
|
|
|
spin_unlock_bh(&tp->lock);
|
|
@@ -1382,7 +1382,7 @@ static int tg3_mdio_write(struct mii_bus
|
|
|
|
spin_lock_bh(&tp->lock);
|
|
|
|
- if (tg3_writephy(tp, reg, val))
|
|
+ if (__tg3_writephy(tp, mii_id, reg, val))
|
|
ret = -EIO;
|
|
|
|
spin_unlock_bh(&tp->lock);
|
|
@@ -1400,7 +1400,7 @@ static void tg3_mdio_config_5785(struct
|
|
u32 val;
|
|
struct phy_device *phydev;
|
|
|
|
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
|
|
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
|
|
switch (phydev->drv->phy_id & phydev->drv->phy_id_mask) {
|
|
case PHY_ID_BCM50610:
|
|
case PHY_ID_BCM50610M:
|
|
@@ -1505,6 +1505,13 @@ static int tg3_mdio_init(struct tg3 *tp)
|
|
TG3_CPMU_PHY_STRAP_IS_SERDES;
|
|
if (is_serdes)
|
|
tp->phy_addr += 7;
|
|
+ } else if (tg3_flag(tp, IS_SSB_CORE) && tg3_flag(tp, ROBOSWITCH)) {
|
|
+ int addr;
|
|
+
|
|
+ addr = ssb_gige_get_phyaddr(tp->pdev);
|
|
+ if (addr < 0)
|
|
+ return addr;
|
|
+ tp->phy_addr = addr;
|
|
} else
|
|
tp->phy_addr = TG3_PHY_MII_ADDR;
|
|
|
|
@@ -1525,7 +1532,7 @@ static int tg3_mdio_init(struct tg3 *tp)
|
|
tp->mdio_bus->read = &tg3_mdio_read;
|
|
tp->mdio_bus->write = &tg3_mdio_write;
|
|
tp->mdio_bus->reset = &tg3_mdio_reset;
|
|
- tp->mdio_bus->phy_mask = ~(1 << TG3_PHY_MII_ADDR);
|
|
+ tp->mdio_bus->phy_mask = ~(1 << tp->phy_addr);
|
|
tp->mdio_bus->irq = &tp->mdio_irq[0];
|
|
|
|
for (i = 0; i < PHY_MAX_ADDR; i++)
|
|
@@ -1546,7 +1553,7 @@ static int tg3_mdio_init(struct tg3 *tp)
|
|
return i;
|
|
}
|
|
|
|
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
|
|
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
|
|
|
|
if (!phydev || !phydev->drv) {
|
|
dev_warn(&tp->pdev->dev, "No PHY devices\n");
|
|
@@ -1963,7 +1970,7 @@ static void tg3_setup_flow_control(struc
|
|
u32 old_tx_mode = tp->tx_mode;
|
|
|
|
if (tg3_flag(tp, USE_PHYLIB))
|
|
- autoneg = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]->autoneg;
|
|
+ autoneg = tp->mdio_bus->phy_map[tp->phy_addr]->autoneg;
|
|
else
|
|
autoneg = tp->link_config.autoneg;
|
|
|
|
@@ -1999,7 +2006,7 @@ static void tg3_adjust_link(struct net_d
|
|
u8 oldflowctrl, linkmesg = 0;
|
|
u32 mac_mode, lcl_adv, rmt_adv;
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
- struct phy_device *phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
|
|
+ struct phy_device *phydev = tp->mdio_bus->phy_map[tp->phy_addr];
|
|
|
|
spin_lock_bh(&tp->lock);
|
|
|
|
@@ -2088,7 +2095,7 @@ static int tg3_phy_init(struct tg3 *tp)
|
|
/* Bring the PHY back to a known state. */
|
|
tg3_bmcr_reset(tp);
|
|
|
|
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
|
|
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
|
|
|
|
/* Attach the MAC to the PHY. */
|
|
phydev = phy_connect(tp->dev, dev_name(&phydev->dev),
|
|
@@ -2115,7 +2122,7 @@ static int tg3_phy_init(struct tg3 *tp)
|
|
SUPPORTED_Asym_Pause);
|
|
break;
|
|
default:
|
|
- phy_disconnect(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
|
|
+ phy_disconnect(tp->mdio_bus->phy_map[tp->phy_addr]);
|
|
return -EINVAL;
|
|
}
|
|
|
|
@@ -2133,7 +2140,7 @@ static void tg3_phy_start(struct tg3 *tp
|
|
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
|
|
return;
|
|
|
|
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
|
|
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
|
|
|
|
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) {
|
|
tp->phy_flags &= ~TG3_PHYFLG_IS_LOW_POWER;
|
|
@@ -2153,13 +2160,13 @@ static void tg3_phy_stop(struct tg3 *tp)
|
|
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
|
|
return;
|
|
|
|
- phy_stop(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
|
|
+ phy_stop(tp->mdio_bus->phy_map[tp->phy_addr]);
|
|
}
|
|
|
|
static void tg3_phy_fini(struct tg3 *tp)
|
|
{
|
|
if (tp->phy_flags & TG3_PHYFLG_IS_CONNECTED) {
|
|
- phy_disconnect(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
|
|
+ phy_disconnect(tp->mdio_bus->phy_map[tp->phy_addr]);
|
|
tp->phy_flags &= ~TG3_PHYFLG_IS_CONNECTED;
|
|
}
|
|
}
|
|
@@ -3999,7 +4006,7 @@ static int tg3_power_down_prepare(struct
|
|
struct phy_device *phydev;
|
|
u32 phyid, advertising;
|
|
|
|
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
|
|
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
|
|
|
|
tp->phy_flags |= TG3_PHYFLG_IS_LOW_POWER;
|
|
|
|
@@ -11783,7 +11790,7 @@ static int tg3_get_settings(struct net_d
|
|
struct phy_device *phydev;
|
|
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
|
|
return -EAGAIN;
|
|
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
|
|
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
|
|
return phy_ethtool_gset(phydev, cmd);
|
|
}
|
|
|
|
@@ -11850,7 +11857,7 @@ static int tg3_set_settings(struct net_d
|
|
struct phy_device *phydev;
|
|
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
|
|
return -EAGAIN;
|
|
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
|
|
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
|
|
return phy_ethtool_sset(phydev, cmd);
|
|
}
|
|
|
|
@@ -12007,7 +12014,7 @@ static int tg3_nway_reset(struct net_dev
|
|
if (tg3_flag(tp, USE_PHYLIB)) {
|
|
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
|
|
return -EAGAIN;
|
|
- r = phy_start_aneg(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
|
|
+ r = phy_start_aneg(tp->mdio_bus->phy_map[tp->phy_addr]);
|
|
} else {
|
|
u32 bmcr;
|
|
|
|
@@ -12123,7 +12130,7 @@ static int tg3_set_pauseparam(struct net
|
|
u32 newadv;
|
|
struct phy_device *phydev;
|
|
|
|
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
|
|
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
|
|
|
|
if (!(phydev->supported & SUPPORTED_Pause) ||
|
|
(!(phydev->supported & SUPPORTED_Asym_Pause) &&
|
|
@@ -13557,7 +13564,7 @@ static int tg3_ioctl(struct net_device *
|
|
struct phy_device *phydev;
|
|
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
|
|
return -EAGAIN;
|
|
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
|
|
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
|
|
return phy_mii_ioctl(phydev, ifr, cmd);
|
|
}
|
|
|
|
@@ -17190,8 +17197,10 @@ static int tg3_init_one(struct pci_dev *
|
|
tg3_flag_set(tp, FLUSH_POSTED_WRITES);
|
|
if (ssb_gige_one_dma_at_once(pdev))
|
|
tg3_flag_set(tp, ONE_DMA_AT_ONCE);
|
|
- if (ssb_gige_have_roboswitch(pdev))
|
|
+ if (ssb_gige_have_roboswitch(pdev)) {
|
|
+ tg3_flag_set(tp, USE_PHYLIB);
|
|
tg3_flag_set(tp, ROBOSWITCH);
|
|
+ }
|
|
if (ssb_gige_is_rgmii(pdev))
|
|
tg3_flag_set(tp, RGMII_MODE);
|
|
}
|
|
@@ -17461,7 +17470,7 @@ static int tg3_init_one(struct pci_dev *
|
|
|
|
if (tp->phy_flags & TG3_PHYFLG_IS_CONNECTED) {
|
|
struct phy_device *phydev;
|
|
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
|
|
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
|
|
netdev_info(dev,
|
|
"attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
|
|
phydev->drv->name, dev_name(&phydev->dev));
|
|
--- a/include/linux/ssb/ssb_driver_gige.h
|
|
+++ b/include/linux/ssb/ssb_driver_gige.h
|
|
@@ -108,6 +108,16 @@ static inline int ssb_gige_get_macaddr(s
|
|
return 0;
|
|
}
|
|
|
|
+/* Get the device phy address */
|
|
+static inline int ssb_gige_get_phyaddr(struct pci_dev *pdev)
|
|
+{
|
|
+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
|
|
+ if (!dev)
|
|
+ return -ENODEV;
|
|
+
|
|
+ return dev->dev->bus->sprom.et0phyaddr;
|
|
+}
|
|
+
|
|
extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
|
|
struct pci_dev *pdev);
|
|
extern int ssb_gige_map_irq(struct ssb_device *sdev,
|
|
@@ -174,6 +184,10 @@ static inline int ssb_gige_get_macaddr(s
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
+static inline int ssb_gige_get_phyaddr(struct pci_dev *pdev)
|
|
+{
|
|
+ return -ENODEV;
|
|
+}
|
|
|
|
#endif /* CONFIG_SSB_DRIVER_GIGE */
|
|
#endif /* LINUX_SSB_DRIVER_GIGE_H_ */
|