hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/target/linux/ar71xx/files/arch/mips/ath79
History
Gabor Juhos d19b868b12 ar71xx: Add support for MikroTik RB951Ui-2HnD 
I noticed that the patch at http://patchwork.openwrt.org/patch/4017/
for adding support for the MikroTik RouterBOARD 951Ui-2HnD had been
abandoned because it wasn't generated and sent to the mailing list
correctly and doesn't apply as a result.  I have cleaned up this patch.

When testing this on real hardware, I also noticed that wireless didn't
work, so this patch fixes that as well.

This patch applies cleanly to SVN 39392.

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>
Patchwork: http://patchwork.openwrt.org/patch/4773/
[juhosg:
  - drop the 'rb951ui_wlan_init' function and rework the code to
    use the recently introduced rb95x_wlan_init function instead,
  - fix GPIO number of the port5 LED,
  - rename LEDs according to the standard LED naming conventions,
    and use 'rb' prefix in the names]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39641
 		2014-02-20 17:07:51 +00:00
..
dev-ap9x-pci.c ar71xx: add ap91_pci_init_simple helper 2012-12-12 16:49:48 +00:00
dev-ap9x-pci.h ar71xx: add ap91_pci_init_simple helper 2012-12-12 16:49:48 +00:00
dev-dsa.c
…
dev-dsa.h
…
dev-eth.c ar71xx: fix max frame length of the QCA955x SoCs 2013-12-23 17:05:23 +00:00
dev-eth.h ar71xx: make ag71xx_mdio_platform_data visible 2013-12-17 22:14:07 +00:00
dev-m25p80.c ar71xx: enable fast flash read on dual-flash devices 2013-01-29 19:12:25 +00:00
dev-m25p80.h
…
dev-nfc.c ar71xx: add ath79_nfc_set_ecc_mode helper 2013-09-19 18:43:42 +00:00
dev-nfc.h ar71xx: add ath79_nfc_set_ecc_mode helper 2013-09-19 18:43:42 +00:00
mach-alfa-ap96.c ar71xx: boost SPI flash read performance 2012-03-27 19:38:17 +00:00
mach-alfa-nx.c ar71xx: remove the built-in MTD maps of several boards 2012-03-27 19:38:01 +00:00
mach-all0258n.c ar71xx: remove the built-in MTD map of the ALL0258N 2012-07-03 15:24:01 +00:00
mach-all0315n.c ar71xx: all0315n: fix ethernet according to vendor info 2012-08-29 10:37:54 +00:00
mach-ap83.c
…
mach-ap96.c ar71xx: remove the built-in MTD map of the AP96 board 2012-03-27 19:38:07 +00:00
mach-ap113.c ar71xx: remove the built-in MTD maps of several boards 2012-03-27 19:38:01 +00:00
mach-ap132.c ar71xx: add kernel support for Atheros AP132 Reference Board 2013-01-29 19:12:30 +00:00
mach-archer-c7.c ar71xx: add kernel support for the TP-Link TL-WDR4900 v2.0 board 2014-02-19 12:15:32 +00:00
mach-aw-nr580.c
…
mach-bhu-bxu2000n2-a.c ar71xx: add kernel support for BHU Networks BXU2000n-2 A1 board 2013-10-30 06:50:57 +00:00
mach-cap4200ag.c ar71xx: add support for the Senao CAP4200AG board 2012-10-27 08:55:38 +00:00
mach-carambola2.c ar71xx: add carambola2 support 2013-07-11 21:16:53 +00:00
mach-dir-505-a1.c ar71xx: dir-505-a1: use ath79_parse_ascii_mac helper 2013-09-20 16:41:31 +00:00
mach-dir-600-a1.c ar71xx: remove the built-in MTD maps of several boards 2012-03-27 19:38:01 +00:00
mach-dir-615-c1.c ar71xx: remove the built-in MTD maps of several boards 2012-03-27 19:38:01 +00:00
mach-dir-825-b1.c ar71xx: dir-825-b1: use ath79_parse_ascii_mac helper 2013-09-20 16:41:32 +00:00
mach-dir-825-c1.c ar71xx: fix WLAN 5 GHz LED init on dir-825-c1 2013-10-20 15:59:04 +00:00
mach-dragino2.c ar71xx: add kernel support for DRAGINO2 2013-10-30 06:50:52 +00:00
mach-eap7660d.c ar71xx: add ALL0305 board alias 2012-08-22 12:33:22 +00:00
mach-ew-dorin.c ar71xx: ew-dorin: added router firmware generation 2012-08-01 12:24:57 +00:00
mach-hornet-ub.c ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 2012-11-05 13:23:27 +00:00
mach-ja76pf.c ar71xx: add support for the jjPlus JA76PF2 board 2012-03-16 18:00:34 +00:00
mach-jwap003.c
…
mach-mr600.c ar71xx: fix mac address calculation on the OpenMesh MR600 2013-02-02 08:47:41 +00:00
mach-mynet-n600.c ar71xx: my net n600: simplify LNA GPIO setup 2014-01-10 09:37:58 +00:00
mach-mynet-n750.c ar71xx: mynet-n750: define LEDs connected to the AR8327 switch 2014-01-21 17:17:42 +00:00
mach-mynet-rext.c ar71xx: improve support for the My Net Wi-Fi Range Extender device 2013-11-29 20:18:44 +00:00
mach-mzk-w04nu.c
…
mach-mzk-w300nh.c
…
mach-nbg460n.c ar71xx: remove __dev{init,exit} annotations from kernel files 2013-02-19 20:52:06 +00:00
mach-om2p.c ar71xx: set eth0 mac address to match bottom label of the OM2P LC 2013-05-26 16:02:29 +00:00
mach-pb42.c
…
mach-pb92.c ar71xx: remove the built-in MTD map of the PB92 board 2012-03-27 19:38:05 +00:00
mach-rb4xx.c ar71xx: register the micro sd card reader on RB493G 2013-02-10 12:31:38 +00:00
mach-rb91x.c ar71xx: add initial support for the Mikrotik RB911G/RB912UAG boards 2013-12-16 18:08:51 +00:00
mach-rb95x.c ar71xx: Add support for MikroTik RB951Ui-2HnD 2014-02-20 17:07:51 +00:00
mach-rb750.c ar71xx: Routerboard 751 Mac Address Offset Fix 2013-02-08 09:34:53 +00:00
mach-rb2011.c ar71xx: rb2011: define LEDs connected to the AR8327 switch 2014-01-20 10:23:01 +00:00
mach-rw2458n.c ar71xx: rw2458n - Use eeprom (art) from wifi card 2013-03-15 14:35:50 +00:00
mach-tew-632brp.c ar71xx: TEW632BRP has buttons 'active low', fix board config 2013-07-28 10:23:22 +00:00
mach-tew-673gru.c ar71xx: tew-673gru: use ath79_parse_ascii_mac helper 2013-09-20 16:41:34 +00:00
mach-tew-712br.c ar71xx: tew-712br: use ath79_parse_ascii_mac helper 2013-09-20 16:41:36 +00:00
mach-tew-732br.c ar71xx: add kernel support for the TEW-732BR board 2013-09-23 09:49:01 +00:00
mach-tl-mr3x20.c ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 2012-11-05 13:23:27 +00:00
mach-tl-mr11u.c ar71xx: improve kernel support for the TL-MR3040 v2 2013-09-25 18:42:10 +00:00
mach-tl-mr13u.c ar71xx: add kernel support for TP-Link TL-MR13U 2013-09-19 17:52:41 +00:00
mach-tl-mr3020.c ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards 2013-01-07 14:30:37 +00:00
mach-tl-wa901nd-v2.c
…
mach-tl-wa901nd.c ar71xx: fix tl-wa901nd buttons code 2013-08-05 09:09:39 +00:00
mach-tl-wax50re.c ar71xx: add kernel support for the TL-WA901ND v3 board 2013-12-15 21:34:18 +00:00
mach-tl-wdr3500.c ar71xx: fix ethernet LEDs on the TL-WDR3500 2013-03-25 06:40:03 +00:00
mach-tl-wdr4300.c ar71xx: fix bad RX sensitivity on newer TL-WDR4300 boards 2014-01-24 17:40:17 +00:00
mach-tl-wr703n.c ar71xx: add kernel support for the TP-LINK TL-WR710N v1 board 2013-07-28 10:23:32 +00:00
mach-tl-wr720n-v3.c ar71xx: add kernel support for TPLINK WR720N v3 2013-04-26 17:00:48 +00:00
mach-tl-wr741nd-v4.c ar71xx: add support for WIFI button on tp-link tl-mr3220v2 2013-06-04 13:25:54 +00:00
mach-tl-wr741nd.c
…
mach-tl-wr841n-v8.c ar71xx: move TL-WA801ND v2 setup code 2013-12-15 21:34:17 +00:00
mach-tl-wr841n.c
…
mach-tl-wr941nd.c
…
mach-tl-wr1041n-v2.c generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 2012-12-22 12:12:35 +00:00
mach-tl-wr1043nd-v2.c ar71xx: tl-wr1043nd-v2: define LEDs connected to the AR8327 switch 2014-01-20 10:23:06 +00:00
mach-tl-wr1043nd.c ar71xx: init switch hw_reset on the TL-WR1043ND board 2012-08-02 09:54:28 +00:00
mach-tl-wr2543n.c ar71xx: fix comment style in mach-tl-wr2543n.c 2012-08-22 12:42:59 +00:00
mach-ubnt.c
…
mach-whr-hp-g300n.c ar71xx: remove the built-in MTD maps of several boards 2012-03-27 19:38:01 +00:00
mach-wlae-ag300n.c ar71xx: Buffalo WLAE-AG300N initial support 2012-08-01 12:24:52 +00:00
mach-wlr8100.c ar71xx: add kernel support for the Sitecom WLR-8100 wireless router 2013-10-30 06:50:54 +00:00
mach-wndap360.c ar71xx: use netgear prefix for WNDAP360 LED names 2013-09-21 15:55:55 +00:00
mach-wndr3700.c ar71xx: use netgear prefix for WNDR3700 LED names 2013-09-21 15:55:50 +00:00
mach-wndr4300.c ar71xx: wndr4300: enable HW ECC mode for the NAND controller 2013-09-19 18:43:43 +00:00
mach-wnr2000-v3.c ar71xx: use netgear prefix for WNR612 v2 LED names 2013-09-21 15:55:54 +00:00
mach-wnr2000.c ar71xx: use netgear prefix for WNR2000 LED names 2013-09-21 15:55:51 +00:00
mach-wnr2200.c ar71xx: use netgear prefix for WNR2200 LED names 2013-09-21 15:55:52 +00:00
mach-wp543.c ar71xx: wp543: set active_low flag for the buttons 2014-01-26 14:55:32 +00:00
mach-wpe72.c ar71xx: wpe72: set active_low flag for the reset button 2014-01-26 14:55:34 +00:00
mach-wrt160nl.c
…
mach-wrt400n.c
…
mach-wzr-hp-ag300h.c ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp 2013-07-14 14:05:27 +00:00
mach-wzr-hp-g300nh.c ar71xx: use uimage split for WZR-HP-G300NH 2013-07-14 14:05:23 +00:00
mach-wzr-hp-g300nh2.c ar71xx: use uimage split for WZR-HP-G300NH2 2013-07-14 14:05:31 +00:00
mach-wzr-hp-g450h.c ath9k: merge initval and tx gain table updates, calibration fixes 2013-12-08 14:48:30 +00:00
mach-zcn-1523h.c ar71xx: don't use the unknown LED on the ZCN-1523-5 board 2012-11-04 22:08:54 +00:00
nvram.c
…
nvram.h
…
pci-ath9k-fixup.c ar71xx: remove superfluous include of asm/mach-ath79/pci.h 2012-06-19 10:13:43 +00:00
pci-ath9k-fixup.h
…
routerboot.c ar71xx: add some RouterBOOT specific helper functions 2013-12-16 10:11:01 +00:00
routerboot.h ar71xx: add some RouterBOOT specific helper functions 2013-12-16 10:11:01 +00:00