openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Felix Fietkau cf3beca4a2 madwifi: improve reliability of napi polling when fast framing is enabled SVN-Revision: 14215		2009-01-27 06:13:57 +00:00
docs	document the BUILDONLY option	2009-01-13 02:03:22 +00:00
include	remove trailing whitespace from the md5sum of the 2.6.27.13 tarball (closes #4502 )	2009-01-25 20:31:26 +00:00
package	madwifi: improve reliability of napi polling when fast framing is enabled	2009-01-27 06:13:57 +00:00
scripts	Added support WRV54G.	2009-01-25 20:42:03 +00:00
target	experimental support for the Planex MZK-W04NU board	2009-01-26 18:50:43 +00:00
toolchain	eglibc: replace the use of stpncpy with strncpy + manual termination (stpncpy is not available on darwin)	2009-01-26 19:49:26 +00:00
tools	fix mpfr download url	2009-01-26 21:38:03 +00:00
.gitignore	add feeds.conf to .gitignore	2008-09-23 11:06:06 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add a menuconfig option for enabling KALLSYMS for the kernel	2009-01-20 21:09:04 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	remove toolchain build directory as well in 'make dirclean'	2008-12-03 04:22:41 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
feeds.conf.default	Add desktop and xfce feed to feeds.conf.default	2009-01-19 19:46:03 +00:00
rules.mk	Use multi libc naming scheme for PACKAGE_DIR	2009-01-24 15:46:57 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org