openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Felix Fietkau ce692ed043 ixp4xx: update Gateworks Cambria board support Several new features for newer boards: - add irq mapping for additional devices - add platform data for i2c bus to SFP modules - add additional UARTs present on some boards - increased R/W delay for expansion bus UARTs - add additional LEDs present on some boards - add GPIO exports and configuration - add ENET switch config present on some boards - add support for GSC present on some boards - added per model setup support for newer boards Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33644		2012-10-07 23:23:34 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	build: create pkginfo dir earlier to avoid build breakage	2012-10-06 22:42:57 +00:00
package	x86: remove grub-legacy	2012-10-07 23:01:56 +00:00
scripts	AR71xx/9xxx based routers are the most common these days, select that as the default target	2012-09-28 20:54:35 +00:00
target	ixp4xx: update Gateworks Cambria board support	2012-10-07 23:23:34 +00:00
toolchain	build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems	2012-09-23 09:50:01 +00:00
tools	cmake: update to version 2.8.9	2012-09-28 00:07:28 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	x86: remove grub-legacy	2012-10-07 23:01:56 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: rework the package/install step - collect package install lists during package/compile, then install all packages at once	2012-10-06 16:01:06 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
rules.mk	build: rework the package/install step - collect package install lists during package/compile, then install all packages at once	2012-10-06 16:01:06 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org