| .. |
|
adm6996.c
|
(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
|
2011-05-09 15:21:58 +00:00 |
|
adm6996.h
|
(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
|
2011-05-09 15:21:58 +00:00 |
|
ar8216.c
|
generic: ar8216: set delay values for SGMII mode on AR8327
|
2012-11-23 20:55:26 +00:00 |
|
ar8216.h
|
generic: ar8216: add MIB counter support for the AR8216 switch as well
|
2012-11-18 16:21:00 +00:00 |
|
ip17xx.c
|
unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range.
|
2010-10-12 20:49:35 +00:00 |
|
micrel.c
|
ar71xx: move micrel PHY driver to the generic linux target
|
2012-03-15 09:25:53 +00:00 |
|
mvswitch.c
|
kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
|
2012-05-06 21:19:14 +00:00 |
|
mvswitch.h
|
rename target/linux/generic-2.6 to generic
|
2010-06-26 20:42:58 +00:00 |
|
psb6970.c
|
unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range.
|
2010-10-12 20:49:35 +00:00 |
|
rtl8306.c
|
rtl8306: do not overwrite registers in the phy fixup, it could mess up other switches (fixes #8911)
|
2011-04-02 16:35:22 +00:00 |
|
rtl8366_smi.c
|
generic: rtl8366_smi: increase delay after switch hw reset
|
2012-08-10 06:32:00 +00:00 |
|
rtl8366_smi.h
|
generic: rtl836x: add hw_reset field to struct rtl8366_smi
|
2012-08-02 09:54:21 +00:00 |
|
rtl8366rb.c
|
generic: rtl836x: add hw_reset field to struct rtl8366_smi
|
2012-08-02 09:54:21 +00:00 |
|
rtl8366s.c
|
generic: rtl836x: add hw_reset field to struct rtl8366_smi
|
2012-08-02 09:54:21 +00:00 |
|
rtl8367.c
|
generic: rtl836x: add hw_reset field to struct rtl8366_smi
|
2012-08-02 09:54:21 +00:00 |
|
rtl8367b.c
|
generic: add driver for the the RTL8367R{B,-VB} switches
|
2012-10-18 07:22:56 +00:00 |
|
swconfig.c
|
swconfig: make it compatible with 3.7
|
2012-11-21 17:38:11 +00:00 |
|
swconfig_leds.c
|
generic: swconfig: use led_set_brightness in LED control code
|
2012-10-26 18:58:18 +00:00 |
49d4b5581d