openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Florian Fainelli cd3b60c14c MIPS: mark unused variables SVN-Revision: 30778		2012-03-02 13:18:53 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	kernel: update linux 3.2 to 3.2.9	2012-03-01 19:49:02 +00:00
package	base-files: remove trailing whitespaces from lib/functions/boot.sh	2012-03-02 11:17:30 +00:00
scripts	kernel: keep more symbols in the kernel modules when doing profiling	2012-03-01 15:13:26 +00:00
target	MIPS: mark unused variables	2012-03-02 13:18:53 +00:00
toolchain	gcc: use .eh_frame sections for exception handling stack unwind - saves about 400 bytes on every executable or shared library	2012-02-17 16:55:08 +00:00
tools	tools/mtd-utils: cleanup mkubifs lzo patch	2012-03-01 19:55:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	if CONFIG_BUILD_NLS is selected, compile uClibc with locale support	2012-01-01 15:11:11 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	abort built in prereq target if there is no site config file for the current target	2012-01-19 12:19:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
rules.mk	kernel: keep more symbols in the kernel modules when doing profiling	2012-03-01 15:13:26 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org