openwrt/target/linux/ipq806x/patches-4.1/701-stmmac_update_to_4.3.patch

2356 lines
71 KiB
Diff

--- a/drivers/net/ethernet/stmicro/Kconfig
+++ b/drivers/net/ethernet/stmicro/Kconfig
@@ -7,9 +7,7 @@ config NET_VENDOR_STMICRO
default y
depends on HAS_IOMEM
---help---
- If you have a network (Ethernet) card belonging to this class, say Y
- and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
+ If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -16,6 +16,7 @@ if STMMAC_ETH
config STMMAC_PLATFORM
tristate "STMMAC Platform bus support"
depends on STMMAC_ETH
+ select MFD_SYSCON
default y
---help---
This selects the platform specific bus support for the stmmac driver.
@@ -26,6 +27,95 @@ config STMMAC_PLATFORM
If unsure, say N.
+if STMMAC_PLATFORM
+
+config DWMAC_GENERIC
+ tristate "Generic driver for DWMAC"
+ default STMMAC_PLATFORM
+ ---help---
+ Generic DWMAC driver for platforms that don't require any
+ platform specific code to function or is using platform
+ data for setup.
+
+config DWMAC_IPQ806X
+ tristate "QCA IPQ806x DWMAC support"
+ default ARCH_QCOM
+ depends on OF
+ select MFD_SYSCON
+ help
+ Support for QCA IPQ806X DWMAC Ethernet.
+
+ This selects the IPQ806x SoC glue layer support for the stmmac
+ device driver. This driver does not use any of the hardware
+ acceleration features available on this SoC. Network devices
+ will behave like standard non-accelerated ethernet interfaces.
+
+config DWMAC_LPC18XX
+ tristate "NXP LPC18xx/43xx DWMAC support"
+ default ARCH_LPC18XX
+ depends on OF
+ select MFD_SYSCON
+ ---help---
+ Support for NXP LPC18xx/43xx DWMAC Ethernet.
+
+config DWMAC_MESON
+ tristate "Amlogic Meson dwmac support"
+ default ARCH_MESON
+ depends on OF
+ help
+ Support for Ethernet controller on Amlogic Meson SoCs.
+
+ This selects the Amlogic Meson SoC glue layer support for
+ the stmmac device driver. This driver is used for Meson6 and
+ Meson8 SoCs.
+
+config DWMAC_ROCKCHIP
+ tristate "Rockchip dwmac support"
+ default ARCH_ROCKCHIP
+ depends on OF
+ select MFD_SYSCON
+ help
+ Support for Ethernet controller on Rockchip RK3288 SoC.
+
+ This selects the Rockchip RK3288 SoC glue layer support for
+ the stmmac device driver.
+
+config DWMAC_SOCFPGA
+ tristate "SOCFPGA dwmac support"
+ default ARCH_SOCFPGA
+ depends on OF
+ select MFD_SYSCON
+ help
+ Support for ethernet controller on Altera SOCFPGA
+
+ This selects the Altera SOCFPGA SoC glue layer support
+ for the stmmac device driver. This driver is used for
+ arria5 and cyclone5 FPGA SoCs.
+
+config DWMAC_STI
+ tristate "STi GMAC support"
+ default ARCH_STI
+ depends on OF
+ select MFD_SYSCON
+ ---help---
+ Support for ethernet controller on STi SOCs.
+
+ This selects STi SoC glue layer support for the stmmac
+ device driver. This driver is used on for the STi series
+ SOCs GMAC ethernet controller.
+
+config DWMAC_SUNXI
+ tristate "Allwinner GMAC support"
+ default ARCH_SUNXI
+ depends on OF
+ ---help---
+ Support for Allwinner A20/A31 GMAC ethernet controllers.
+
+ This selects Allwinner SoC glue layer support for the
+ stmmac device driver. This driver is used for A20/A31
+ GMAC ethernet controller.
+endif
+
config STMMAC_PCI
tristate "STMMAC PCI bus support"
depends on STMMAC_ETH && PCI
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -4,9 +4,17 @@ stmmac-objs:= stmmac_main.o stmmac_ethto
dwmac100_core.o dwmac100_dma.o enh_desc.o norm_desc.o \
mmc_core.o stmmac_hwtstamp.o stmmac_ptp.o $(stmmac-y)
-obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-platform.o
-stmmac-platform-objs:= stmmac_platform.o dwmac-meson.o dwmac-sunxi.o \
- dwmac-sti.o dwmac-socfpga.o dwmac-rk.o
+# Ordering matters. Generic driver must be last.
+obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-platform.o
+obj-$(CONFIG_DWMAC_IPQ806X) += dwmac-ipq806x.o
+obj-$(CONFIG_DWMAC_LPC18XX) += dwmac-lpc18xx.o
+obj-$(CONFIG_DWMAC_MESON) += dwmac-meson.o
+obj-$(CONFIG_DWMAC_ROCKCHIP) += dwmac-rk.o
+obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-socfpga.o
+obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o
+obj-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
+obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o
+stmmac-platform-objs:= stmmac_platform.o
obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o
stmmac-pci-objs:= stmmac_pci.o
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
@@ -0,0 +1,81 @@
+/*
+ * Generic DWMAC platform driver
+ *
+ * Copyright (C) 2007-2011 STMicroelectronics Ltd
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "stmmac.h"
+#include "stmmac_platform.h"
+
+static int dwmac_generic_probe(struct platform_device *pdev)
+{
+ struct plat_stmmacenet_data *plat_dat;
+ struct stmmac_resources stmmac_res;
+ int ret;
+
+ ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+ if (ret)
+ return ret;
+
+ if (pdev->dev.of_node) {
+ plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+ if (IS_ERR(plat_dat)) {
+ dev_err(&pdev->dev, "dt configuration failed\n");
+ return PTR_ERR(plat_dat);
+ }
+ } else {
+ plat_dat = dev_get_platdata(&pdev->dev);
+ if (!plat_dat) {
+ dev_err(&pdev->dev, "no platform data provided\n");
+ return -EINVAL;
+ }
+
+ /* Set default value for multicast hash bins */
+ plat_dat->multicast_filter_bins = HASH_TABLE_SIZE;
+
+ /* Set default value for unicast filter entries */
+ plat_dat->unicast_filter_entries = 1;
+ }
+
+ /* Custom initialisation (if needed) */
+ if (plat_dat->init) {
+ ret = plat_dat->init(pdev, plat_dat->bsp_priv);
+ if (ret)
+ return ret;
+ }
+
+ return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+}
+
+static const struct of_device_id dwmac_generic_match[] = {
+ { .compatible = "st,spear600-gmac"},
+ { .compatible = "snps,dwmac-3.610"},
+ { .compatible = "snps,dwmac-3.70a"},
+ { .compatible = "snps,dwmac-3.710"},
+ { .compatible = "snps,dwmac"},
+ { }
+};
+MODULE_DEVICE_TABLE(of, dwmac_generic_match);
+
+static struct platform_driver dwmac_generic_driver = {
+ .probe = dwmac_generic_probe,
+ .remove = stmmac_pltfr_remove,
+ .driver = {
+ .name = STMMAC_RESOURCE_NAME,
+ .pm = &stmmac_pltfr_pm_ops,
+ .of_match_table = of_match_ptr(dwmac_generic_match),
+ },
+};
+module_platform_driver(dwmac_generic_driver);
+
+MODULE_DESCRIPTION("Generic dwmac driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -0,0 +1,373 @@
+/*
+ * Qualcomm Atheros IPQ806x GMAC glue layer
+ *
+ * Copyright (C) 2015 The Linux Foundation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/of_net.h>
+#include <linux/mfd/syscon.h>
+#include <linux/stmmac.h>
+#include <linux/of_mdio.h>
+#include <linux/module.h>
+
+#include "stmmac_platform.h"
+
+#define NSS_COMMON_CLK_GATE 0x8
+#define NSS_COMMON_CLK_GATE_PTP_EN(x) BIT(0x10 + x)
+#define NSS_COMMON_CLK_GATE_RGMII_RX_EN(x) BIT(0x9 + (x * 2))
+#define NSS_COMMON_CLK_GATE_RGMII_TX_EN(x) BIT(0x8 + (x * 2))
+#define NSS_COMMON_CLK_GATE_GMII_RX_EN(x) BIT(0x4 + x)
+#define NSS_COMMON_CLK_GATE_GMII_TX_EN(x) BIT(0x0 + x)
+
+#define NSS_COMMON_CLK_DIV0 0xC
+#define NSS_COMMON_CLK_DIV_OFFSET(x) (x * 8)
+#define NSS_COMMON_CLK_DIV_MASK 0x7f
+
+#define NSS_COMMON_CLK_SRC_CTRL 0x14
+#define NSS_COMMON_CLK_SRC_CTRL_OFFSET(x) (x)
+/* Mode is coded on 1 bit but is different depending on the MAC ID:
+ * MAC0: QSGMII=0 RGMII=1
+ * MAC1: QSGMII=0 SGMII=0 RGMII=1
+ * MAC2 & MAC3: QSGMII=0 SGMII=1
+ */
+#define NSS_COMMON_CLK_SRC_CTRL_RGMII(x) 1
+#define NSS_COMMON_CLK_SRC_CTRL_SGMII(x) ((x >= 2) ? 1 : 0)
+
+#define NSS_COMMON_MACSEC_CTL 0x28
+#define NSS_COMMON_MACSEC_CTL_EXT_BYPASS_EN(x) (1 << x)
+
+#define NSS_COMMON_GMAC_CTL(x) (0x30 + (x * 4))
+#define NSS_COMMON_GMAC_CTL_CSYS_REQ BIT(19)
+#define NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL BIT(16)
+#define NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET 8
+#define NSS_COMMON_GMAC_CTL_IFG_OFFSET 0
+#define NSS_COMMON_GMAC_CTL_IFG_MASK 0x3f
+
+#define NSS_COMMON_CLK_DIV_RGMII_1000 1
+#define NSS_COMMON_CLK_DIV_RGMII_100 9
+#define NSS_COMMON_CLK_DIV_RGMII_10 99
+#define NSS_COMMON_CLK_DIV_SGMII_1000 0
+#define NSS_COMMON_CLK_DIV_SGMII_100 4
+#define NSS_COMMON_CLK_DIV_SGMII_10 49
+
+#define QSGMII_PCS_MODE_CTL 0x68
+#define QSGMII_PCS_MODE_CTL_AUTONEG_EN(x) BIT((x * 8) + 7)
+
+#define QSGMII_PCS_CAL_LCKDT_CTL 0x120
+#define QSGMII_PCS_CAL_LCKDT_CTL_RST BIT(19)
+
+/* Only GMAC1/2/3 support SGMII and their CTL register are not contiguous */
+#define QSGMII_PHY_SGMII_CTL(x) ((x == 1) ? 0x134 : \
+ (0x13c + (4 * (x - 2))))
+#define QSGMII_PHY_CDR_EN BIT(0)
+#define QSGMII_PHY_RX_FRONT_EN BIT(1)
+#define QSGMII_PHY_RX_SIGNAL_DETECT_EN BIT(2)
+#define QSGMII_PHY_TX_DRIVER_EN BIT(3)
+#define QSGMII_PHY_QSGMII_EN BIT(7)
+#define QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET 12
+#define QSGMII_PHY_PHASE_LOOP_GAIN_MASK 0x7
+#define QSGMII_PHY_RX_DC_BIAS_OFFSET 18
+#define QSGMII_PHY_RX_DC_BIAS_MASK 0x3
+#define QSGMII_PHY_RX_INPUT_EQU_OFFSET 20
+#define QSGMII_PHY_RX_INPUT_EQU_MASK 0x3
+#define QSGMII_PHY_CDR_PI_SLEW_OFFSET 22
+#define QSGMII_PHY_CDR_PI_SLEW_MASK 0x3
+#define QSGMII_PHY_TX_DRV_AMP_OFFSET 28
+#define QSGMII_PHY_TX_DRV_AMP_MASK 0xf
+
+struct ipq806x_gmac {
+ struct platform_device *pdev;
+ struct regmap *nss_common;
+ struct regmap *qsgmii_csr;
+ uint32_t id;
+ struct clk *core_clk;
+ phy_interface_t phy_mode;
+};
+
+static int get_clk_div_sgmii(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+ struct device *dev = &gmac->pdev->dev;
+ int div;
+
+ switch (speed) {
+ case SPEED_1000:
+ div = NSS_COMMON_CLK_DIV_SGMII_1000;
+ break;
+
+ case SPEED_100:
+ div = NSS_COMMON_CLK_DIV_SGMII_100;
+ break;
+
+ case SPEED_10:
+ div = NSS_COMMON_CLK_DIV_SGMII_10;
+ break;
+
+ default:
+ dev_err(dev, "Speed %dMbps not supported in SGMII\n", speed);
+ return -EINVAL;
+ }
+
+ return div;
+}
+
+static int get_clk_div_rgmii(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+ struct device *dev = &gmac->pdev->dev;
+ int div;
+
+ switch (speed) {
+ case SPEED_1000:
+ div = NSS_COMMON_CLK_DIV_RGMII_1000;
+ break;
+
+ case SPEED_100:
+ div = NSS_COMMON_CLK_DIV_RGMII_100;
+ break;
+
+ case SPEED_10:
+ div = NSS_COMMON_CLK_DIV_RGMII_10;
+ break;
+
+ default:
+ dev_err(dev, "Speed %dMbps not supported in RGMII\n", speed);
+ return -EINVAL;
+ }
+
+ return div;
+}
+
+static int ipq806x_gmac_set_speed(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+ uint32_t clk_bits, val;
+ int div;
+
+ switch (gmac->phy_mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ div = get_clk_div_rgmii(gmac, speed);
+ clk_bits = NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) |
+ NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id);
+ break;
+
+ case PHY_INTERFACE_MODE_SGMII:
+ div = get_clk_div_sgmii(gmac, speed);
+ clk_bits = NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) |
+ NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id);
+ break;
+
+ default:
+ dev_err(&gmac->pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+ phy_modes(gmac->phy_mode));
+ return -EINVAL;
+ }
+
+ /* Disable the clocks */
+ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+ val &= ~clk_bits;
+ regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+ /* Set the divider */
+ regmap_read(gmac->nss_common, NSS_COMMON_CLK_DIV0, &val);
+ val &= ~(NSS_COMMON_CLK_DIV_MASK
+ << NSS_COMMON_CLK_DIV_OFFSET(gmac->id));
+ val |= div << NSS_COMMON_CLK_DIV_OFFSET(gmac->id);
+ regmap_write(gmac->nss_common, NSS_COMMON_CLK_DIV0, val);
+
+ /* Enable the clock back */
+ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+ val |= clk_bits;
+ regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+ return 0;
+}
+
+static void *ipq806x_gmac_of_parse(struct ipq806x_gmac *gmac)
+{
+ struct device *dev = &gmac->pdev->dev;
+
+ gmac->phy_mode = of_get_phy_mode(dev->of_node);
+ if (gmac->phy_mode < 0) {
+ dev_err(dev, "missing phy mode property\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (of_property_read_u32(dev->of_node, "qcom,id", &gmac->id) < 0) {
+ dev_err(dev, "missing qcom id property\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ /* The GMACs are called 1 to 4 in the documentation, but to simplify the
+ * code and keep it consistent with the Linux convention, we'll number
+ * them from 0 to 3 here.
+ */
+ if (gmac->id < 0 || gmac->id > 3) {
+ dev_err(dev, "invalid gmac id\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ gmac->core_clk = devm_clk_get(dev, "stmmaceth");
+ if (IS_ERR(gmac->core_clk)) {
+ dev_err(dev, "missing stmmaceth clk property\n");
+ return gmac->core_clk;
+ }
+ clk_set_rate(gmac->core_clk, 266000000);
+
+ /* Setup the register map for the nss common registers */
+ gmac->nss_common = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "qcom,nss-common");
+ if (IS_ERR(gmac->nss_common)) {
+ dev_err(dev, "missing nss-common node\n");
+ return gmac->nss_common;
+ }
+
+ /* Setup the register map for the qsgmii csr registers */
+ gmac->qsgmii_csr = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "qcom,qsgmii-csr");
+ if (IS_ERR(gmac->qsgmii_csr)) {
+ dev_err(dev, "missing qsgmii-csr node\n");
+ return gmac->qsgmii_csr;
+ }
+
+ return NULL;
+}
+
+static void ipq806x_gmac_fix_mac_speed(void *priv, unsigned int speed)
+{
+ struct ipq806x_gmac *gmac = priv;
+
+ ipq806x_gmac_set_speed(gmac, speed);
+}
+
+static int ipq806x_gmac_probe(struct platform_device *pdev)
+{
+ struct plat_stmmacenet_data *plat_dat;
+ struct stmmac_resources stmmac_res;
+ struct device *dev = &pdev->dev;
+ struct ipq806x_gmac *gmac;
+ int val;
+ void *err;
+
+ val = stmmac_get_platform_resources(pdev, &stmmac_res);
+ if (val)
+ return val;
+
+ plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+ if (IS_ERR(plat_dat))
+ return PTR_ERR(plat_dat);
+
+ gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
+ if (!gmac)
+ return -ENOMEM;
+
+ gmac->pdev = pdev;
+
+ err = ipq806x_gmac_of_parse(gmac);
+ if (IS_ERR(err)) {
+ dev_err(dev, "device tree parsing error\n");
+ return PTR_ERR(err);
+ }
+
+ regmap_write(gmac->qsgmii_csr, QSGMII_PCS_CAL_LCKDT_CTL,
+ QSGMII_PCS_CAL_LCKDT_CTL_RST);
+
+ /* Inter frame gap is set to 12 */
+ val = 12 << NSS_COMMON_GMAC_CTL_IFG_OFFSET |
+ 12 << NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET;
+ /* We also initiate an AXI low power exit request */
+ val |= NSS_COMMON_GMAC_CTL_CSYS_REQ;
+ switch (gmac->phy_mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val |= NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ val &= ~NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+ phy_modes(gmac->phy_mode));
+ return -EINVAL;
+ }
+ regmap_write(gmac->nss_common, NSS_COMMON_GMAC_CTL(gmac->id), val);
+
+ /* Configure the clock src according to the mode */
+ regmap_read(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, &val);
+ val &= ~(1 << NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id));
+ switch (gmac->phy_mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val |= NSS_COMMON_CLK_SRC_CTRL_RGMII(gmac->id) <<
+ NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ val |= NSS_COMMON_CLK_SRC_CTRL_SGMII(gmac->id) <<
+ NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+ phy_modes(gmac->phy_mode));
+ return -EINVAL;
+ }
+ regmap_write(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, val);
+
+ /* Enable PTP clock */
+ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+ val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id);
+ regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+ if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) {
+ regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id),
+ QSGMII_PHY_CDR_EN |
+ QSGMII_PHY_RX_FRONT_EN |
+ QSGMII_PHY_RX_SIGNAL_DETECT_EN |
+ QSGMII_PHY_TX_DRIVER_EN |
+ QSGMII_PHY_QSGMII_EN |
+ 0x4 << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET |
+ 0x3 << QSGMII_PHY_RX_DC_BIAS_OFFSET |
+ 0x1 << QSGMII_PHY_RX_INPUT_EQU_OFFSET |
+ 0x2 << QSGMII_PHY_CDR_PI_SLEW_OFFSET |
+ 0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET);
+ }
+
+ plat_dat->has_gmac = true;
+ plat_dat->bsp_priv = gmac;
+ plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed;
+
+ return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+}
+
+static const struct of_device_id ipq806x_gmac_dwmac_match[] = {
+ { .compatible = "qcom,ipq806x-gmac" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ipq806x_gmac_dwmac_match);
+
+static struct platform_driver ipq806x_gmac_dwmac_driver = {
+ .probe = ipq806x_gmac_probe,
+ .remove = stmmac_pltfr_remove,
+ .driver = {
+ .name = "ipq806x-gmac-dwmac",
+ .pm = &stmmac_pltfr_pm_ops,
+ .of_match_table = ipq806x_gmac_dwmac_match,
+ },
+};
+module_platform_driver(ipq806x_gmac_dwmac_driver);
+
+MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>");
+MODULE_DESCRIPTION("Qualcomm Atheros IPQ806x DWMAC specific glue layer");
+MODULE_LICENSE("Dual BSD/GPL");
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c
@@ -0,0 +1,86 @@
+/*
+ * DWMAC glue for NXP LPC18xx/LPC43xx Ethernet
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/stmmac.h>
+
+#include "stmmac_platform.h"
+
+/* Register defines for CREG syscon */
+#define LPC18XX_CREG_CREG6 0x12c
+# define LPC18XX_CREG_CREG6_ETHMODE_MASK 0x7
+# define LPC18XX_CREG_CREG6_ETHMODE_MII 0x0
+# define LPC18XX_CREG_CREG6_ETHMODE_RMII 0x4
+
+static int lpc18xx_dwmac_probe(struct platform_device *pdev)
+{
+ struct plat_stmmacenet_data *plat_dat;
+ struct stmmac_resources stmmac_res;
+ struct regmap *reg;
+ u8 ethmode;
+ int ret;
+
+ ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+ if (ret)
+ return ret;
+
+ plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+ if (IS_ERR(plat_dat))
+ return PTR_ERR(plat_dat);
+
+ plat_dat->has_gmac = true;
+
+ reg = syscon_regmap_lookup_by_compatible("nxp,lpc1850-creg");
+ if (IS_ERR(reg)) {
+ dev_err(&pdev->dev, "syscon lookup failed\n");
+ return PTR_ERR(reg);
+ }
+
+ if (plat_dat->interface == PHY_INTERFACE_MODE_MII) {
+ ethmode = LPC18XX_CREG_CREG6_ETHMODE_MII;
+ } else if (plat_dat->interface == PHY_INTERFACE_MODE_RMII) {
+ ethmode = LPC18XX_CREG_CREG6_ETHMODE_RMII;
+ } else {
+ dev_err(&pdev->dev, "Only MII and RMII mode supported\n");
+ return -EINVAL;
+ }
+
+ regmap_update_bits(reg, LPC18XX_CREG_CREG6,
+ LPC18XX_CREG_CREG6_ETHMODE_MASK, ethmode);
+
+ return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+}
+
+static const struct of_device_id lpc18xx_dwmac_match[] = {
+ { .compatible = "nxp,lpc1850-dwmac" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_dwmac_match);
+
+static struct platform_driver lpc18xx_dwmac_driver = {
+ .probe = lpc18xx_dwmac_probe,
+ .remove = stmmac_pltfr_remove,
+ .driver = {
+ .name = "lpc18xx-dwmac",
+ .pm = &stmmac_pltfr_pm_ops,
+ .of_match_table = lpc18xx_dwmac_match,
+ },
+};
+module_platform_driver(lpc18xx_dwmac_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_DESCRIPTION("DWMAC glue for LPC18xx/43xx Ethernet");
+MODULE_LICENSE("GPL v2");
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
@@ -15,6 +15,7 @@
#include <linux/ethtool.h>
#include <linux/io.h>
#include <linux/ioport.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/stmmac.h>
@@ -46,24 +47,54 @@ static void meson6_dwmac_fix_mac_speed(v
writel(val, dwmac->reg);
}
-static void *meson6_dwmac_setup(struct platform_device *pdev)
+static int meson6_dwmac_probe(struct platform_device *pdev)
{
+ struct plat_stmmacenet_data *plat_dat;
+ struct stmmac_resources stmmac_res;
struct meson_dwmac *dwmac;
struct resource *res;
+ int ret;
+
+ ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+ if (ret)
+ return ret;
+
+ plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+ if (IS_ERR(plat_dat))
+ return PTR_ERR(plat_dat);
dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
if (!dwmac)
- return ERR_PTR(-ENOMEM);
+ return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
dwmac->reg = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(dwmac->reg))
- return ERR_CAST(dwmac->reg);
+ return PTR_ERR(dwmac->reg);
+
+ plat_dat->bsp_priv = dwmac;
+ plat_dat->fix_mac_speed = meson6_dwmac_fix_mac_speed;
- return dwmac;
+ return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
}
-const struct stmmac_of_data meson6_dwmac_data = {
- .setup = meson6_dwmac_setup,
- .fix_mac_speed = meson6_dwmac_fix_mac_speed,
+static const struct of_device_id meson6_dwmac_match[] = {
+ { .compatible = "amlogic,meson6-dwmac" },
+ { }
};
+MODULE_DEVICE_TABLE(of, meson6_dwmac_match);
+
+static struct platform_driver meson6_dwmac_driver = {
+ .probe = meson6_dwmac_probe,
+ .remove = stmmac_pltfr_remove,
+ .driver = {
+ .name = "meson6-dwmac",
+ .pm = &stmmac_pltfr_pm_ops,
+ .of_match_table = meson6_dwmac_match,
+ },
+};
+module_platform_driver(meson6_dwmac_driver);
+
+MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
+MODULE_DESCRIPTION("Amlogic Meson DWMAC glue layer");
+MODULE_LICENSE("GPL v2");
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -22,17 +22,31 @@
#include <linux/phy.h>
#include <linux/of_net.h>
#include <linux/gpio.h>
+#include <linux/module.h>
#include <linux/of_gpio.h>
#include <linux/of_device.h>
+#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/delay.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
+#include "stmmac_platform.h"
+
+struct rk_priv_data;
+struct rk_gmac_ops {
+ void (*set_to_rgmii)(struct rk_priv_data *bsp_priv,
+ int tx_delay, int rx_delay);
+ void (*set_to_rmii)(struct rk_priv_data *bsp_priv);
+ void (*set_rgmii_speed)(struct rk_priv_data *bsp_priv, int speed);
+ void (*set_rmii_speed)(struct rk_priv_data *bsp_priv, int speed);
+};
+
struct rk_priv_data {
struct platform_device *pdev;
int phy_iface;
struct regulator *regulator;
+ const struct rk_gmac_ops *ops;
bool clk_enabled;
bool clock_input;
@@ -60,103 +74,228 @@ struct rk_priv_data {
#define RK3288_GRF_SOC_CON1 0x0248
#define RK3288_GRF_SOC_CON3 0x0250
-#define RK3288_GRF_GPIO3D_E 0x01ec
-#define RK3288_GRF_GPIO4A_E 0x01f0
-#define RK3288_GRF_GPIO4B_E 0x01f4
/*RK3288_GRF_SOC_CON1*/
-#define GMAC_PHY_INTF_SEL_RGMII (GRF_BIT(6) | GRF_CLR_BIT(7) | GRF_CLR_BIT(8))
-#define GMAC_PHY_INTF_SEL_RMII (GRF_CLR_BIT(6) | GRF_CLR_BIT(7) | GRF_BIT(8))
-#define GMAC_FLOW_CTRL GRF_BIT(9)
-#define GMAC_FLOW_CTRL_CLR GRF_CLR_BIT(9)
-#define GMAC_SPEED_10M GRF_CLR_BIT(10)
-#define GMAC_SPEED_100M GRF_BIT(10)
-#define GMAC_RMII_CLK_25M GRF_BIT(11)
-#define GMAC_RMII_CLK_2_5M GRF_CLR_BIT(11)
-#define GMAC_CLK_125M (GRF_CLR_BIT(12) | GRF_CLR_BIT(13))
-#define GMAC_CLK_25M (GRF_BIT(12) | GRF_BIT(13))
-#define GMAC_CLK_2_5M (GRF_CLR_BIT(12) | GRF_BIT(13))
-#define GMAC_RMII_MODE GRF_BIT(14)
-#define GMAC_RMII_MODE_CLR GRF_CLR_BIT(14)
+#define RK3288_GMAC_PHY_INTF_SEL_RGMII (GRF_BIT(6) | GRF_CLR_BIT(7) | \
+ GRF_CLR_BIT(8))
+#define RK3288_GMAC_PHY_INTF_SEL_RMII (GRF_CLR_BIT(6) | GRF_CLR_BIT(7) | \
+ GRF_BIT(8))
+#define RK3288_GMAC_FLOW_CTRL GRF_BIT(9)
+#define RK3288_GMAC_FLOW_CTRL_CLR GRF_CLR_BIT(9)
+#define RK3288_GMAC_SPEED_10M GRF_CLR_BIT(10)
+#define RK3288_GMAC_SPEED_100M GRF_BIT(10)
+#define RK3288_GMAC_RMII_CLK_25M GRF_BIT(11)
+#define RK3288_GMAC_RMII_CLK_2_5M GRF_CLR_BIT(11)
+#define RK3288_GMAC_CLK_125M (GRF_CLR_BIT(12) | GRF_CLR_BIT(13))
+#define RK3288_GMAC_CLK_25M (GRF_BIT(12) | GRF_BIT(13))
+#define RK3288_GMAC_CLK_2_5M (GRF_CLR_BIT(12) | GRF_BIT(13))
+#define RK3288_GMAC_RMII_MODE GRF_BIT(14)
+#define RK3288_GMAC_RMII_MODE_CLR GRF_CLR_BIT(14)
/*RK3288_GRF_SOC_CON3*/
-#define GMAC_TXCLK_DLY_ENABLE GRF_BIT(14)
-#define GMAC_TXCLK_DLY_DISABLE GRF_CLR_BIT(14)
-#define GMAC_RXCLK_DLY_ENABLE GRF_BIT(15)
-#define GMAC_RXCLK_DLY_DISABLE GRF_CLR_BIT(15)
-#define GMAC_CLK_RX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 7)
-#define GMAC_CLK_TX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 0)
+#define RK3288_GMAC_TXCLK_DLY_ENABLE GRF_BIT(14)
+#define RK3288_GMAC_TXCLK_DLY_DISABLE GRF_CLR_BIT(14)
+#define RK3288_GMAC_RXCLK_DLY_ENABLE GRF_BIT(15)
+#define RK3288_GMAC_RXCLK_DLY_DISABLE GRF_CLR_BIT(15)
+#define RK3288_GMAC_CLK_RX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 7)
+#define RK3288_GMAC_CLK_TX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 0)
-static void set_to_rgmii(struct rk_priv_data *bsp_priv,
- int tx_delay, int rx_delay)
+static void rk3288_set_to_rgmii(struct rk_priv_data *bsp_priv,
+ int tx_delay, int rx_delay)
{
struct device *dev = &bsp_priv->pdev->dev;
if (IS_ERR(bsp_priv->grf)) {
- dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+ dev_err(dev, "Missing rockchip,grf property\n");
return;
}
regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
- GMAC_PHY_INTF_SEL_RGMII | GMAC_RMII_MODE_CLR);
+ RK3288_GMAC_PHY_INTF_SEL_RGMII |
+ RK3288_GMAC_RMII_MODE_CLR);
regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON3,
- GMAC_RXCLK_DLY_ENABLE | GMAC_TXCLK_DLY_ENABLE |
- GMAC_CLK_RX_DL_CFG(rx_delay) |
- GMAC_CLK_TX_DL_CFG(tx_delay));
+ RK3288_GMAC_RXCLK_DLY_ENABLE |
+ RK3288_GMAC_TXCLK_DLY_ENABLE |
+ RK3288_GMAC_CLK_RX_DL_CFG(rx_delay) |
+ RK3288_GMAC_CLK_TX_DL_CFG(tx_delay));
}
-static void set_to_rmii(struct rk_priv_data *bsp_priv)
+static void rk3288_set_to_rmii(struct rk_priv_data *bsp_priv)
{
struct device *dev = &bsp_priv->pdev->dev;
if (IS_ERR(bsp_priv->grf)) {
- dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+ dev_err(dev, "Missing rockchip,grf property\n");
return;
}
regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
- GMAC_PHY_INTF_SEL_RMII | GMAC_RMII_MODE);
+ RK3288_GMAC_PHY_INTF_SEL_RMII | RK3288_GMAC_RMII_MODE);
}
-static void set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
+static void rk3288_set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
{
struct device *dev = &bsp_priv->pdev->dev;
if (IS_ERR(bsp_priv->grf)) {
- dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+ dev_err(dev, "Missing rockchip,grf property\n");
return;
}
if (speed == 10)
- regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1, GMAC_CLK_2_5M);
+ regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
+ RK3288_GMAC_CLK_2_5M);
else if (speed == 100)
- regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1, GMAC_CLK_25M);
+ regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
+ RK3288_GMAC_CLK_25M);
else if (speed == 1000)
- regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1, GMAC_CLK_125M);
+ regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
+ RK3288_GMAC_CLK_125M);
else
dev_err(dev, "unknown speed value for RGMII! speed=%d", speed);
}
-static void set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
+static void rk3288_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
{
struct device *dev = &bsp_priv->pdev->dev;
if (IS_ERR(bsp_priv->grf)) {
- dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+ dev_err(dev, "Missing rockchip,grf property\n");
return;
}
if (speed == 10) {
regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
- GMAC_RMII_CLK_2_5M | GMAC_SPEED_10M);
+ RK3288_GMAC_RMII_CLK_2_5M |
+ RK3288_GMAC_SPEED_10M);
} else if (speed == 100) {
regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
- GMAC_RMII_CLK_25M | GMAC_SPEED_100M);
+ RK3288_GMAC_RMII_CLK_25M |
+ RK3288_GMAC_SPEED_100M);
+ } else {
+ dev_err(dev, "unknown speed value for RMII! speed=%d", speed);
+ }
+}
+
+static const struct rk_gmac_ops rk3288_ops = {
+ .set_to_rgmii = rk3288_set_to_rgmii,
+ .set_to_rmii = rk3288_set_to_rmii,
+ .set_rgmii_speed = rk3288_set_rgmii_speed,
+ .set_rmii_speed = rk3288_set_rmii_speed,
+};
+
+#define RK3368_GRF_SOC_CON15 0x043c
+#define RK3368_GRF_SOC_CON16 0x0440
+
+/* RK3368_GRF_SOC_CON15 */
+#define RK3368_GMAC_PHY_INTF_SEL_RGMII (GRF_BIT(9) | GRF_CLR_BIT(10) | \
+ GRF_CLR_BIT(11))
+#define RK3368_GMAC_PHY_INTF_SEL_RMII (GRF_CLR_BIT(9) | GRF_CLR_BIT(10) | \
+ GRF_BIT(11))
+#define RK3368_GMAC_FLOW_CTRL GRF_BIT(8)
+#define RK3368_GMAC_FLOW_CTRL_CLR GRF_CLR_BIT(8)
+#define RK3368_GMAC_SPEED_10M GRF_CLR_BIT(7)
+#define RK3368_GMAC_SPEED_100M GRF_BIT(7)
+#define RK3368_GMAC_RMII_CLK_25M GRF_BIT(3)
+#define RK3368_GMAC_RMII_CLK_2_5M GRF_CLR_BIT(3)
+#define RK3368_GMAC_CLK_125M (GRF_CLR_BIT(4) | GRF_CLR_BIT(5))
+#define RK3368_GMAC_CLK_25M (GRF_BIT(4) | GRF_BIT(5))
+#define RK3368_GMAC_CLK_2_5M (GRF_CLR_BIT(4) | GRF_BIT(5))
+#define RK3368_GMAC_RMII_MODE GRF_BIT(6)
+#define RK3368_GMAC_RMII_MODE_CLR GRF_CLR_BIT(6)
+
+/* RK3368_GRF_SOC_CON16 */
+#define RK3368_GMAC_TXCLK_DLY_ENABLE GRF_BIT(7)
+#define RK3368_GMAC_TXCLK_DLY_DISABLE GRF_CLR_BIT(7)
+#define RK3368_GMAC_RXCLK_DLY_ENABLE GRF_BIT(15)
+#define RK3368_GMAC_RXCLK_DLY_DISABLE GRF_CLR_BIT(15)
+#define RK3368_GMAC_CLK_RX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 8)
+#define RK3368_GMAC_CLK_TX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 0)
+
+static void rk3368_set_to_rgmii(struct rk_priv_data *bsp_priv,
+ int tx_delay, int rx_delay)
+{
+ struct device *dev = &bsp_priv->pdev->dev;
+
+ if (IS_ERR(bsp_priv->grf)) {
+ dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+ return;
+ }
+
+ regmap_write(bsp_priv->grf, RK3368_GRF_SOC_CON15,
+ RK3368_GMAC_PHY_INTF_SEL_RGMII |
+ RK3368_GMAC_RMII_MODE_CLR);
+ regmap_write(bsp_priv->grf, RK3368_GRF_SOC_CON16,
+ RK3368_GMAC_RXCLK_DLY_ENABLE |
+ RK3368_GMAC_TXCLK_DLY_ENABLE |
+ RK3368_GMAC_CLK_RX_DL_CFG(rx_delay) |
+ RK3368_GMAC_CLK_TX_DL_CFG(tx_delay));
+}
+
+static void rk3368_set_to_rmii(struct rk_priv_data *bsp_priv)
+{
+ struct device *dev = &bsp_priv->pdev->dev;
+
+ if (IS_ERR(bsp_priv->grf)) {
+ dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+ return;
+ }
+
+ regmap_write(bsp_priv->grf, RK3368_GRF_SOC_CON15,
+ RK3368_GMAC_PHY_INTF_SEL_RMII | RK3368_GMAC_RMII_MODE);
+}
+
+static void rk3368_set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
+{
+ struct device *dev = &bsp_priv->pdev->dev;
+
+ if (IS_ERR(bsp_priv->grf)) {
+ dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+ return;
+ }
+
+ if (speed == 10)
+ regmap_write(bsp_priv->grf, RK3368_GRF_SOC_CON15,
+ RK3368_GMAC_CLK_2_5M);
+ else if (speed == 100)
+ regmap_write(bsp_priv->grf, RK3368_GRF_SOC_CON15,
+ RK3368_GMAC_CLK_25M);
+ else if (speed == 1000)
+ regmap_write(bsp_priv->grf, RK3368_GRF_SOC_CON15,
+ RK3368_GMAC_CLK_125M);
+ else
+ dev_err(dev, "unknown speed value for RGMII! speed=%d", speed);
+}
+
+static void rk3368_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
+{
+ struct device *dev = &bsp_priv->pdev->dev;
+
+ if (IS_ERR(bsp_priv->grf)) {
+ dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+ return;
+ }
+
+ if (speed == 10) {
+ regmap_write(bsp_priv->grf, RK3368_GRF_SOC_CON15,
+ RK3368_GMAC_RMII_CLK_2_5M |
+ RK3368_GMAC_SPEED_10M);
+ } else if (speed == 100) {
+ regmap_write(bsp_priv->grf, RK3368_GRF_SOC_CON15,
+ RK3368_GMAC_RMII_CLK_25M |
+ RK3368_GMAC_SPEED_100M);
} else {
dev_err(dev, "unknown speed value for RMII! speed=%d", speed);
}
}
+static const struct rk_gmac_ops rk3368_ops = {
+ .set_to_rgmii = rk3368_set_to_rgmii,
+ .set_to_rmii = rk3368_set_to_rmii,
+ .set_rgmii_speed = rk3368_set_rgmii_speed,
+ .set_rmii_speed = rk3368_set_rmii_speed,
+};
+
static int gmac_clk_init(struct rk_priv_data *bsp_priv)
{
struct device *dev = &bsp_priv->pdev->dev;
@@ -165,46 +304,46 @@ static int gmac_clk_init(struct rk_priv_
bsp_priv->mac_clk_rx = devm_clk_get(dev, "mac_clk_rx");
if (IS_ERR(bsp_priv->mac_clk_rx))
- dev_err(dev, "%s: cannot get clock %s\n",
- __func__, "mac_clk_rx");
+ dev_err(dev, "cannot get clock %s\n",
+ "mac_clk_rx");
bsp_priv->mac_clk_tx = devm_clk_get(dev, "mac_clk_tx");
if (IS_ERR(bsp_priv->mac_clk_tx))
- dev_err(dev, "%s: cannot get clock %s\n",
- __func__, "mac_clk_tx");
+ dev_err(dev, "cannot get clock %s\n",
+ "mac_clk_tx");
bsp_priv->aclk_mac = devm_clk_get(dev, "aclk_mac");
if (IS_ERR(bsp_priv->aclk_mac))
- dev_err(dev, "%s: cannot get clock %s\n",
- __func__, "aclk_mac");
+ dev_err(dev, "cannot get clock %s\n",
+ "aclk_mac");
bsp_priv->pclk_mac = devm_clk_get(dev, "pclk_mac");
if (IS_ERR(bsp_priv->pclk_mac))
- dev_err(dev, "%s: cannot get clock %s\n",
- __func__, "pclk_mac");
+ dev_err(dev, "cannot get clock %s\n",
+ "pclk_mac");
bsp_priv->clk_mac = devm_clk_get(dev, "stmmaceth");
if (IS_ERR(bsp_priv->clk_mac))
- dev_err(dev, "%s: cannot get clock %s\n",
- __func__, "stmmaceth");
+ dev_err(dev, "cannot get clock %s\n",
+ "stmmaceth");
if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII) {
bsp_priv->clk_mac_ref = devm_clk_get(dev, "clk_mac_ref");
if (IS_ERR(bsp_priv->clk_mac_ref))
- dev_err(dev, "%s: cannot get clock %s\n",
- __func__, "clk_mac_ref");
+ dev_err(dev, "cannot get clock %s\n",
+ "clk_mac_ref");
if (!bsp_priv->clock_input) {
bsp_priv->clk_mac_refout =
devm_clk_get(dev, "clk_mac_refout");
if (IS_ERR(bsp_priv->clk_mac_refout))
- dev_err(dev, "%s: cannot get clock %s\n",
- __func__, "clk_mac_refout");
+ dev_err(dev, "cannot get clock %s\n",
+ "clk_mac_refout");
}
}
if (bsp_priv->clock_input) {
- dev_info(dev, "%s: clock input from PHY\n", __func__);
+ dev_info(dev, "clock input from PHY\n");
} else {
if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
clk_set_rate(bsp_priv->clk_mac, 50000000);
@@ -291,26 +430,25 @@ static int phy_power_on(struct rk_priv_d
struct device *dev = &bsp_priv->pdev->dev;
if (!ldo) {
- dev_err(dev, "%s: no regulator found\n", __func__);
+ dev_err(dev, "no regulator found\n");
return -1;
}
if (enable) {
ret = regulator_enable(ldo);
if (ret)
- dev_err(dev, "%s: fail to enable phy-supply\n",
- __func__);
+ dev_err(dev, "fail to enable phy-supply\n");
} else {
ret = regulator_disable(ldo);
if (ret)
- dev_err(dev, "%s: fail to disable phy-supply\n",
- __func__);
+ dev_err(dev, "fail to disable phy-supply\n");
}
return 0;
}
-static void *rk_gmac_setup(struct platform_device *pdev)
+static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
+ const struct rk_gmac_ops *ops)
{
struct rk_priv_data *bsp_priv;
struct device *dev = &pdev->dev;
@@ -323,6 +461,7 @@ static void *rk_gmac_setup(struct platfo
return ERR_PTR(-ENOMEM);
bsp_priv->phy_iface = of_get_phy_mode(dev->of_node);
+ bsp_priv->ops = ops;
bsp_priv->regulator = devm_regulator_get_optional(dev, "phy");
if (IS_ERR(bsp_priv->regulator)) {
@@ -336,12 +475,11 @@ static void *rk_gmac_setup(struct platfo
ret = of_property_read_string(dev->of_node, "clock_in_out", &strings);
if (ret) {
- dev_err(dev, "%s: Can not read property: clock_in_out.\n",
- __func__);
+ dev_err(dev, "Can not read property: clock_in_out.\n");
bsp_priv->clock_input = true;
} else {
- dev_info(dev, "%s: clock input or output? (%s).\n",
- __func__, strings);
+ dev_info(dev, "clock input or output? (%s).\n",
+ strings);
if (!strcmp(strings, "input"))
bsp_priv->clock_input = true;
else
@@ -351,22 +489,22 @@ static void *rk_gmac_setup(struct platfo
ret = of_property_read_u32(dev->of_node, "tx_delay", &value);
if (ret) {
bsp_priv->tx_delay = 0x30;
- dev_err(dev, "%s: Can not read property: tx_delay.", __func__);
- dev_err(dev, "%s: set tx_delay to 0x%x\n",
- __func__, bsp_priv->tx_delay);
+ dev_err(dev, "Can not read property: tx_delay.");
+ dev_err(dev, "set tx_delay to 0x%x\n",
+ bsp_priv->tx_delay);
} else {
- dev_info(dev, "%s: TX delay(0x%x).\n", __func__, value);
+ dev_info(dev, "TX delay(0x%x).\n", value);
bsp_priv->tx_delay = value;
}
ret = of_property_read_u32(dev->of_node, "rx_delay", &value);
if (ret) {
bsp_priv->rx_delay = 0x10;
- dev_err(dev, "%s: Can not read property: rx_delay.", __func__);
- dev_err(dev, "%s: set rx_delay to 0x%x\n",
- __func__, bsp_priv->rx_delay);
+ dev_err(dev, "Can not read property: rx_delay.");
+ dev_err(dev, "set rx_delay to 0x%x\n",
+ bsp_priv->rx_delay);
} else {
- dev_info(dev, "%s: RX delay(0x%x).\n", __func__, value);
+ dev_info(dev, "RX delay(0x%x).\n", value);
bsp_priv->rx_delay = value;
}
@@ -376,13 +514,14 @@ static void *rk_gmac_setup(struct platfo
/*rmii or rgmii*/
if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RGMII) {
- dev_info(dev, "%s: init for RGMII\n", __func__);
- set_to_rgmii(bsp_priv, bsp_priv->tx_delay, bsp_priv->rx_delay);
+ dev_info(dev, "init for RGMII\n");
+ bsp_priv->ops->set_to_rgmii(bsp_priv, bsp_priv->tx_delay,
+ bsp_priv->rx_delay);
} else if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII) {
- dev_info(dev, "%s: init for RMII\n", __func__);
- set_to_rmii(bsp_priv);
+ dev_info(dev, "init for RMII\n");
+ bsp_priv->ops->set_to_rmii(bsp_priv);
} else {
- dev_err(dev, "%s: NO interface defined!\n", __func__);
+ dev_err(dev, "NO interface defined!\n");
}
gmac_clk_init(bsp_priv);
@@ -420,17 +559,68 @@ static void rk_fix_speed(void *priv, uns
struct device *dev = &bsp_priv->pdev->dev;
if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RGMII)
- set_rgmii_speed(bsp_priv, speed);
+ bsp_priv->ops->set_rgmii_speed(bsp_priv, speed);
else if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
- set_rmii_speed(bsp_priv, speed);
+ bsp_priv->ops->set_rmii_speed(bsp_priv, speed);
else
dev_err(dev, "unsupported interface %d", bsp_priv->phy_iface);
}
-const struct stmmac_of_data rk3288_gmac_data = {
- .has_gmac = 1,
- .fix_mac_speed = rk_fix_speed,
- .setup = rk_gmac_setup,
- .init = rk_gmac_init,
- .exit = rk_gmac_exit,
+static int rk_gmac_probe(struct platform_device *pdev)
+{
+ struct plat_stmmacenet_data *plat_dat;
+ struct stmmac_resources stmmac_res;
+ const struct rk_gmac_ops *data;
+ int ret;
+
+ data = of_device_get_match_data(&pdev->dev);
+ if (!data) {
+ dev_err(&pdev->dev, "no of match data provided\n");
+ return -EINVAL;
+ }
+
+ ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+ if (ret)
+ return ret;
+
+ plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+ if (IS_ERR(plat_dat))
+ return PTR_ERR(plat_dat);
+
+ plat_dat->has_gmac = true;
+ plat_dat->init = rk_gmac_init;
+ plat_dat->exit = rk_gmac_exit;
+ plat_dat->fix_mac_speed = rk_fix_speed;
+
+ plat_dat->bsp_priv = rk_gmac_setup(pdev, data);
+ if (IS_ERR(plat_dat->bsp_priv))
+ return PTR_ERR(plat_dat->bsp_priv);
+
+ ret = rk_gmac_init(pdev, plat_dat->bsp_priv);
+ if (ret)
+ return ret;
+
+ return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+}
+
+static const struct of_device_id rk_gmac_dwmac_match[] = {
+ { .compatible = "rockchip,rk3288-gmac", .data = &rk3288_ops },
+ { .compatible = "rockchip,rk3368-gmac", .data = &rk3368_ops },
+ { }
};
+MODULE_DEVICE_TABLE(of, rk_gmac_dwmac_match);
+
+static struct platform_driver rk_gmac_dwmac_driver = {
+ .probe = rk_gmac_probe,
+ .remove = stmmac_pltfr_remove,
+ .driver = {
+ .name = "rk_gmac-dwmac",
+ .pm = &stmmac_pltfr_pm_ops,
+ .of_match_table = rk_gmac_dwmac_match,
+ },
+};
+module_platform_driver(rk_gmac_dwmac_driver);
+
+MODULE_AUTHOR("Chen-Zhi (Roger Chen) <roger.chen@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip RK3288 DWMAC specific glue layer");
+MODULE_LICENSE("GPL");
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -175,31 +175,6 @@ static int socfpga_dwmac_setup(struct so
return 0;
}
-static void *socfpga_dwmac_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- int ret;
- struct socfpga_dwmac *dwmac;
-
- dwmac = devm_kzalloc(dev, sizeof(*dwmac), GFP_KERNEL);
- if (!dwmac)
- return ERR_PTR(-ENOMEM);
-
- ret = socfpga_dwmac_parse_data(dwmac, dev);
- if (ret) {
- dev_err(dev, "Unable to parse OF data\n");
- return ERR_PTR(ret);
- }
-
- ret = socfpga_dwmac_setup(dwmac);
- if (ret) {
- dev_err(dev, "couldn't setup SoC glue (%d)\n", ret);
- return ERR_PTR(ret);
- }
-
- return dwmac;
-}
-
static void socfpga_dwmac_exit(struct platform_device *pdev, void *priv)
{
struct socfpga_dwmac *dwmac = priv;
@@ -257,9 +232,65 @@ static int socfpga_dwmac_init(struct pla
return ret;
}
-const struct stmmac_of_data socfpga_gmac_data = {
- .setup = socfpga_dwmac_probe,
- .init = socfpga_dwmac_init,
- .exit = socfpga_dwmac_exit,
- .fix_mac_speed = socfpga_dwmac_fix_mac_speed,
+static int socfpga_dwmac_probe(struct platform_device *pdev)
+{
+ struct plat_stmmacenet_data *plat_dat;
+ struct stmmac_resources stmmac_res;
+ struct device *dev = &pdev->dev;
+ int ret;
+ struct socfpga_dwmac *dwmac;
+
+ ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+ if (ret)
+ return ret;
+
+ plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+ if (IS_ERR(plat_dat))
+ return PTR_ERR(plat_dat);
+
+ dwmac = devm_kzalloc(dev, sizeof(*dwmac), GFP_KERNEL);
+ if (!dwmac)
+ return -ENOMEM;
+
+ ret = socfpga_dwmac_parse_data(dwmac, dev);
+ if (ret) {
+ dev_err(dev, "Unable to parse OF data\n");
+ return ret;
+ }
+
+ ret = socfpga_dwmac_setup(dwmac);
+ if (ret) {
+ dev_err(dev, "couldn't setup SoC glue (%d)\n", ret);
+ return ret;
+ }
+
+ plat_dat->bsp_priv = dwmac;
+ plat_dat->init = socfpga_dwmac_init;
+ plat_dat->exit = socfpga_dwmac_exit;
+ plat_dat->fix_mac_speed = socfpga_dwmac_fix_mac_speed;
+
+ ret = socfpga_dwmac_init(pdev, plat_dat->bsp_priv);
+ if (ret)
+ return ret;
+
+ return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+}
+
+static const struct of_device_id socfpga_dwmac_match[] = {
+ { .compatible = "altr,socfpga-stmmac" },
+ { }
};
+MODULE_DEVICE_TABLE(of, socfpga_dwmac_match);
+
+static struct platform_driver socfpga_dwmac_driver = {
+ .probe = socfpga_dwmac_probe,
+ .remove = stmmac_pltfr_remove,
+ .driver = {
+ .name = "socfpga-dwmac",
+ .pm = &stmmac_pltfr_pm_ops,
+ .of_match_table = socfpga_dwmac_match,
+ },
+};
+module_platform_driver(socfpga_dwmac_driver);
+
+MODULE_LICENSE("GPL v2");
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
@@ -17,9 +17,11 @@
#include <linux/stmmac.h>
#include <linux/phy.h>
#include <linux/mfd/syscon.h>
+#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/clk.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/of_net.h>
#include "stmmac_platform.h"
@@ -127,6 +129,11 @@ struct sti_dwmac {
struct device *dev;
struct regmap *regmap;
u32 speed;
+ void (*fix_retime_src)(void *priv, unsigned int speed);
+};
+
+struct sti_dwmac_of_data {
+ void (*fix_retime_src)(void *priv, unsigned int speed);
};
static u32 phy_intf_sels[] = {
@@ -221,8 +228,9 @@ static void stid127_fix_retime_src(void
regmap_update_bits(dwmac->regmap, reg, STID127_RETIME_SRC_MASK, val);
}
-static void sti_dwmac_ctrl_init(struct sti_dwmac *dwmac)
+static int sti_dwmac_init(struct platform_device *pdev, void *priv)
{
+ struct sti_dwmac *dwmac = priv;
struct regmap *regmap = dwmac->regmap;
int iface = dwmac->interface;
struct device *dev = dwmac->dev;
@@ -240,28 +248,8 @@ static void sti_dwmac_ctrl_init(struct s
val = (iface == PHY_INTERFACE_MODE_REVMII) ? 0 : ENMII;
regmap_update_bits(regmap, reg, ENMII_MASK, val);
-}
-
-static int stix4xx_init(struct platform_device *pdev, void *priv)
-{
- struct sti_dwmac *dwmac = priv;
- u32 spd = dwmac->speed;
- sti_dwmac_ctrl_init(dwmac);
-
- stih4xx_fix_retime_src(priv, spd);
-
- return 0;
-}
-
-static int stid127_init(struct platform_device *pdev, void *priv)
-{
- struct sti_dwmac *dwmac = priv;
- u32 spd = dwmac->speed;
-
- sti_dwmac_ctrl_init(dwmac);
-
- stid127_fix_retime_src(priv, spd);
+ dwmac->fix_retime_src(priv, dwmac->speed);
return 0;
}
@@ -333,34 +321,80 @@ static int sti_dwmac_parse_data(struct s
return 0;
}
-static void *sti_dwmac_setup(struct platform_device *pdev)
+static int sti_dwmac_probe(struct platform_device *pdev)
{
+ struct plat_stmmacenet_data *plat_dat;
+ const struct sti_dwmac_of_data *data;
+ struct stmmac_resources stmmac_res;
struct sti_dwmac *dwmac;
int ret;
+ data = of_device_get_match_data(&pdev->dev);
+ if (!data) {
+ dev_err(&pdev->dev, "No OF match data provided\n");
+ return -EINVAL;
+ }
+
+ ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+ if (ret)
+ return ret;
+
+ plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+ if (IS_ERR(plat_dat))
+ return PTR_ERR(plat_dat);
+
dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
if (!dwmac)
- return ERR_PTR(-ENOMEM);
+ return -ENOMEM;
ret = sti_dwmac_parse_data(dwmac, pdev);
if (ret) {
dev_err(&pdev->dev, "Unable to parse OF data\n");
- return ERR_PTR(ret);
+ return ret;
}
- return dwmac;
+ dwmac->fix_retime_src = data->fix_retime_src;
+
+ plat_dat->bsp_priv = dwmac;
+ plat_dat->init = sti_dwmac_init;
+ plat_dat->exit = sti_dwmac_exit;
+ plat_dat->fix_mac_speed = data->fix_retime_src;
+
+ ret = sti_dwmac_init(pdev, plat_dat->bsp_priv);
+ if (ret)
+ return ret;
+
+ return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
}
-const struct stmmac_of_data stih4xx_dwmac_data = {
- .fix_mac_speed = stih4xx_fix_retime_src,
- .setup = sti_dwmac_setup,
- .init = stix4xx_init,
- .exit = sti_dwmac_exit,
+static const struct sti_dwmac_of_data stih4xx_dwmac_data = {
+ .fix_retime_src = stih4xx_fix_retime_src,
+};
+
+static const struct sti_dwmac_of_data stid127_dwmac_data = {
+ .fix_retime_src = stid127_fix_retime_src,
};
-const struct stmmac_of_data stid127_dwmac_data = {
- .fix_mac_speed = stid127_fix_retime_src,
- .setup = sti_dwmac_setup,
- .init = stid127_init,
- .exit = sti_dwmac_exit,
+static const struct of_device_id sti_dwmac_match[] = {
+ { .compatible = "st,stih415-dwmac", .data = &stih4xx_dwmac_data},
+ { .compatible = "st,stih416-dwmac", .data = &stih4xx_dwmac_data},
+ { .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data},
+ { .compatible = "st,stih407-dwmac", .data = &stih4xx_dwmac_data},
+ { }
};
+MODULE_DEVICE_TABLE(of, sti_dwmac_match);
+
+static struct platform_driver sti_dwmac_driver = {
+ .probe = sti_dwmac_probe,
+ .remove = stmmac_pltfr_remove,
+ .driver = {
+ .name = "sti-dwmac",
+ .pm = &stmmac_pltfr_pm_ops,
+ .of_match_table = sti_dwmac_match,
+ },
+};
+module_platform_driver(sti_dwmac_driver);
+
+MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics DWMAC Specific Glue layer");
+MODULE_LICENSE("GPL");
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -18,7 +18,9 @@
#include <linux/stmmac.h>
#include <linux/clk.h>
+#include <linux/module.h>
#include <linux/phy.h>
+#include <linux/platform_device.h>
#include <linux/of_net.h>
#include <linux/regulator/consumer.h>
@@ -31,35 +33,6 @@ struct sunxi_priv_data {
struct regulator *regulator;
};
-static void *sun7i_gmac_setup(struct platform_device *pdev)
-{
- struct sunxi_priv_data *gmac;
- struct device *dev = &pdev->dev;
-
- gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
- if (!gmac)
- return ERR_PTR(-ENOMEM);
-
- gmac->interface = of_get_phy_mode(dev->of_node);
-
- gmac->tx_clk = devm_clk_get(dev, "allwinner_gmac_tx");
- if (IS_ERR(gmac->tx_clk)) {
- dev_err(dev, "could not get tx clock\n");
- return gmac->tx_clk;
- }
-
- /* Optional regulator for PHY */
- gmac->regulator = devm_regulator_get_optional(dev, "phy");
- if (IS_ERR(gmac->regulator)) {
- if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER)
- return ERR_PTR(-EPROBE_DEFER);
- dev_info(dev, "no regulator found\n");
- gmac->regulator = NULL;
- }
-
- return gmac;
-}
-
#define SUN7I_GMAC_GMII_RGMII_RATE 125000000
#define SUN7I_GMAC_MII_RATE 25000000
@@ -130,13 +103,76 @@ static void sun7i_fix_speed(void *priv,
}
}
-/* of_data specifying hardware features and callbacks.
- * hardware features were copied from Allwinner drivers. */
-const struct stmmac_of_data sun7i_gmac_data = {
- .has_gmac = 1,
- .tx_coe = 1,
- .fix_mac_speed = sun7i_fix_speed,
- .setup = sun7i_gmac_setup,
- .init = sun7i_gmac_init,
- .exit = sun7i_gmac_exit,
+static int sun7i_gmac_probe(struct platform_device *pdev)
+{
+ struct plat_stmmacenet_data *plat_dat;
+ struct stmmac_resources stmmac_res;
+ struct sunxi_priv_data *gmac;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+ if (ret)
+ return ret;
+
+ plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+ if (IS_ERR(plat_dat))
+ return PTR_ERR(plat_dat);
+
+ gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
+ if (!gmac)
+ return -ENOMEM;
+
+ gmac->interface = of_get_phy_mode(dev->of_node);
+
+ gmac->tx_clk = devm_clk_get(dev, "allwinner_gmac_tx");
+ if (IS_ERR(gmac->tx_clk)) {
+ dev_err(dev, "could not get tx clock\n");
+ return PTR_ERR(gmac->tx_clk);
+ }
+
+ /* Optional regulator for PHY */
+ gmac->regulator = devm_regulator_get_optional(dev, "phy");
+ if (IS_ERR(gmac->regulator)) {
+ if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ dev_info(dev, "no regulator found\n");
+ gmac->regulator = NULL;
+ }
+
+ /* platform data specifying hardware features and callbacks.
+ * hardware features were copied from Allwinner drivers. */
+ plat_dat->tx_coe = 1;
+ plat_dat->has_gmac = true;
+ plat_dat->bsp_priv = gmac;
+ plat_dat->init = sun7i_gmac_init;
+ plat_dat->exit = sun7i_gmac_exit;
+ plat_dat->fix_mac_speed = sun7i_fix_speed;
+
+ ret = sun7i_gmac_init(pdev, plat_dat->bsp_priv);
+ if (ret)
+ return ret;
+
+ return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+}
+
+static const struct of_device_id sun7i_dwmac_match[] = {
+ { .compatible = "allwinner,sun7i-a20-gmac" },
+ { }
};
+MODULE_DEVICE_TABLE(of, sun7i_dwmac_match);
+
+static struct platform_driver sun7i_dwmac_driver = {
+ .probe = sun7i_gmac_probe,
+ .remove = stmmac_pltfr_remove,
+ .driver = {
+ .name = "sun7i-dwmac",
+ .pm = &stmmac_pltfr_pm_ops,
+ .of_match_table = sun7i_dwmac_match,
+ },
+};
+module_platform_driver(sun7i_dwmac_driver);
+
+MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>");
+MODULE_DESCRIPTION("Allwinner sunxi DWMAC specific glue layer");
+MODULE_LICENSE("GPL");
--- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
@@ -73,7 +73,7 @@
#define MMC_RX_OCTETCOUNT_G 0x00000188
#define MMC_RX_BROADCASTFRAME_G 0x0000018c
#define MMC_RX_MULTICASTFRAME_G 0x00000190
-#define MMC_RX_CRC_ERRROR 0x00000194
+#define MMC_RX_CRC_ERROR 0x00000194
#define MMC_RX_ALIGN_ERROR 0x00000198
#define MMC_RX_RUN_ERROR 0x0000019C
#define MMC_RX_JABBER_ERROR 0x000001A0
@@ -196,7 +196,7 @@ void dwmac_mmc_read(void __iomem *ioaddr
mmc->mmc_rx_octetcount_g += readl(ioaddr + MMC_RX_OCTETCOUNT_G);
mmc->mmc_rx_broadcastframe_g += readl(ioaddr + MMC_RX_BROADCASTFRAME_G);
mmc->mmc_rx_multicastframe_g += readl(ioaddr + MMC_RX_MULTICASTFRAME_G);
- mmc->mmc_rx_crc_error += readl(ioaddr + MMC_RX_CRC_ERRROR);
+ mmc->mmc_rx_crc_error += readl(ioaddr + MMC_RX_CRC_ERROR);
mmc->mmc_rx_align_error += readl(ioaddr + MMC_RX_ALIGN_ERROR);
mmc->mmc_rx_run_error += readl(ioaddr + MMC_RX_RUN_ERROR);
mmc->mmc_rx_jabber_error += readl(ioaddr + MMC_RX_JABBER_ERROR);
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -34,6 +34,14 @@
#include <linux/ptp_clock_kernel.h>
#include <linux/reset.h>
+struct stmmac_resources {
+ void __iomem *addr;
+ const char *mac;
+ int wol_irq;
+ int lpi_irq;
+ int irq;
+};
+
struct stmmac_tx_info {
dma_addr_t buf;
bool map_as_page;
@@ -135,9 +143,9 @@ void stmmac_ptp_unregister(struct stmmac
int stmmac_resume(struct net_device *ndev);
int stmmac_suspend(struct net_device *ndev);
int stmmac_dvr_remove(struct net_device *ndev);
-struct stmmac_priv *stmmac_dvr_probe(struct device *device,
- struct plat_stmmacenet_data *plat_dat,
- void __iomem *addr);
+int stmmac_dvr_probe(struct device *device,
+ struct plat_stmmacenet_data *plat_dat,
+ struct stmmac_resources *res);
void stmmac_disable_eee_mode(struct stmmac_priv *priv);
bool stmmac_eee_init(struct stmmac_priv *priv);
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -52,6 +52,7 @@
#include "stmmac_ptp.h"
#include "stmmac.h"
#include <linux/reset.h>
+#include <linux/of_mdio.h>
#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x)
@@ -816,18 +817,25 @@ static int stmmac_init_phy(struct net_de
priv->speed = 0;
priv->oldduplex = -1;
- if (priv->plat->phy_bus_name)
- snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
- priv->plat->phy_bus_name, priv->plat->bus_id);
- else
- snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
- priv->plat->bus_id);
+ if (priv->plat->phy_node) {
+ phydev = of_phy_connect(dev, priv->plat->phy_node,
+ &stmmac_adjust_link, 0, interface);
+ } else {
+ if (priv->plat->phy_bus_name)
+ snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
+ priv->plat->phy_bus_name, priv->plat->bus_id);
+ else
+ snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
+ priv->plat->bus_id);
- snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
- priv->plat->phy_addr);
- pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id_fmt);
+ snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
+ priv->plat->phy_addr);
+ pr_debug("stmmac_init_phy: trying to attach to %s\n",
+ phy_id_fmt);
- phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, interface);
+ phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link,
+ interface);
+ }
if (IS_ERR_OR_NULL(phydev)) {
pr_err("%s: Could not attach to PHY\n", dev->name);
@@ -851,7 +859,7 @@ static int stmmac_init_phy(struct net_de
* device as well.
* Note: phydev->phy_id is the result of reading the UID PHY registers.
*/
- if (phydev->phy_id == 0) {
+ if (!priv->plat->phy_node && phydev->phy_id == 0) {
phy_disconnect(phydev);
return -ENODEV;
}
@@ -978,13 +986,11 @@ static int stmmac_init_rx_buffers(struct
{
struct sk_buff *skb;
- skb = __netdev_alloc_skb(priv->dev, priv->dma_buf_sz + NET_IP_ALIGN,
- flags);
+ skb = __netdev_alloc_skb_ip_align(priv->dev, priv->dma_buf_sz, flags);
if (!skb) {
pr_err("%s: Rx init fails; skb is NULL\n", __func__);
return -ENOMEM;
}
- skb_reserve(skb, NET_IP_ALIGN);
priv->rx_skbuff[i] = skb;
priv->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data,
priv->dma_buf_sz,
@@ -2803,16 +2809,15 @@ static int stmmac_hw_init(struct stmmac_
* stmmac_dvr_probe
* @device: device pointer
* @plat_dat: platform data pointer
- * @addr: iobase memory address
+ * @res: stmmac resource pointer
* Description: this is the main probe function used to
* call the alloc_etherdev, allocate the priv structure.
* Return:
- * on success the new private structure is returned, otherwise the error
- * pointer.
+ * returns 0 on success, otherwise errno.
*/
-struct stmmac_priv *stmmac_dvr_probe(struct device *device,
- struct plat_stmmacenet_data *plat_dat,
- void __iomem *addr)
+int stmmac_dvr_probe(struct device *device,
+ struct plat_stmmacenet_data *plat_dat,
+ struct stmmac_resources *res)
{
int ret = 0;
struct net_device *ndev = NULL;
@@ -2820,7 +2825,7 @@ struct stmmac_priv *stmmac_dvr_probe(str
ndev = alloc_etherdev(sizeof(struct stmmac_priv));
if (!ndev)
- return ERR_PTR(-ENOMEM);
+ return -ENOMEM;
SET_NETDEV_DEV(ndev, device);
@@ -2831,8 +2836,17 @@ struct stmmac_priv *stmmac_dvr_probe(str
stmmac_set_ethtool_ops(ndev);
priv->pause = pause;
priv->plat = plat_dat;
- priv->ioaddr = addr;
- priv->dev->base_addr = (unsigned long)addr;
+ priv->ioaddr = res->addr;
+ priv->dev->base_addr = (unsigned long)res->addr;
+
+ priv->dev->irq = res->irq;
+ priv->wol_irq = res->wol_irq;
+ priv->lpi_irq = res->lpi_irq;
+
+ if (res->mac)
+ memcpy(priv->dev->dev_addr, res->mac, ETH_ALEN);
+
+ dev_set_drvdata(device, priv->dev);
/* Verify driver arguments */
stmmac_verify_args();
@@ -2947,7 +2961,7 @@ struct stmmac_priv *stmmac_dvr_probe(str
}
}
- return priv;
+ return 0;
error_mdio_register:
unregister_netdev(ndev);
@@ -2960,7 +2974,7 @@ error_pclk_get:
error_clk_get:
free_netdev(ndev);
- return ERR_PTR(ret);
+ return ret;
}
EXPORT_SYMBOL_GPL(stmmac_dvr_probe);
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -161,11 +161,16 @@ int stmmac_mdio_reset(struct mii_bus *bu
if (!gpio_request(reset_gpio, "mdio-reset")) {
gpio_direction_output(reset_gpio, active_low ? 1 : 0);
- udelay(data->delays[0]);
+ if (data->delays[0])
+ msleep(DIV_ROUND_UP(data->delays[0], 1000));
+
gpio_set_value(reset_gpio, active_low ? 0 : 1);
- udelay(data->delays[1]);
+ if (data->delays[1])
+ msleep(DIV_ROUND_UP(data->delays[1], 1000));
+
gpio_set_value(reset_gpio, active_low ? 1 : 0);
- udelay(data->delays[2]);
+ if (data->delays[2])
+ msleep(DIV_ROUND_UP(data->delays[2], 1000));
}
}
#endif
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -163,7 +163,7 @@ static int stmmac_pci_probe(struct pci_d
{
struct stmmac_pci_info *info = (struct stmmac_pci_info *)id->driver_data;
struct plat_stmmacenet_data *plat;
- struct stmmac_priv *priv;
+ struct stmmac_resources res;
int i;
int ret;
@@ -214,19 +214,12 @@ static int stmmac_pci_probe(struct pci_d
pci_enable_msi(pdev);
- priv = stmmac_dvr_probe(&pdev->dev, plat, pcim_iomap_table(pdev)[i]);
- if (IS_ERR(priv)) {
- dev_err(&pdev->dev, "%s: main driver probe failed\n", __func__);
- return PTR_ERR(priv);
- }
- priv->dev->irq = pdev->irq;
- priv->wol_irq = pdev->irq;
-
- pci_set_drvdata(pdev, priv->dev);
-
- dev_dbg(&pdev->dev, "STMMAC PCI driver registration completed\n");
+ memset(&res, 0, sizeof(res));
+ res.addr = pcim_iomap_table(pdev)[i];
+ res.wol_irq = pdev->irq;
+ res.irq = pdev->irq;
- return 0;
+ return stmmac_dvr_probe(&pdev->dev, plat, &res);
}
/**
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -28,29 +28,11 @@
#include <linux/of.h>
#include <linux/of_net.h>
#include <linux/of_device.h>
+#include <linux/of_mdio.h>
#include "stmmac.h"
#include "stmmac_platform.h"
-static const struct of_device_id stmmac_dt_ids[] = {
- /* SoC specific glue layers should come before generic bindings */
- { .compatible = "rockchip,rk3288-gmac", .data = &rk3288_gmac_data},
- { .compatible = "amlogic,meson6-dwmac", .data = &meson6_dwmac_data},
- { .compatible = "allwinner,sun7i-a20-gmac", .data = &sun7i_gmac_data},
- { .compatible = "st,stih415-dwmac", .data = &stih4xx_dwmac_data},
- { .compatible = "st,stih416-dwmac", .data = &stih4xx_dwmac_data},
- { .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data},
- { .compatible = "st,stih407-dwmac", .data = &stih4xx_dwmac_data},
- { .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data },
- { .compatible = "st,spear600-gmac"},
- { .compatible = "snps,dwmac-3.610"},
- { .compatible = "snps,dwmac-3.70a"},
- { .compatible = "snps,dwmac-3.710"},
- { .compatible = "snps,dwmac"},
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, stmmac_dt_ids);
-
#ifdef CONFIG_OF
/**
@@ -122,37 +104,16 @@ static int dwmac1000_validate_ucast_entr
* this function is to read the driver parameters from device-tree and
* set some private fields that will be used by the main at runtime.
*/
-static int stmmac_probe_config_dt(struct platform_device *pdev,
- struct plat_stmmacenet_data *plat,
- const char **mac)
+struct plat_stmmacenet_data *
+stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
{
struct device_node *np = pdev->dev.of_node;
+ struct plat_stmmacenet_data *plat;
struct stmmac_dma_cfg *dma_cfg;
- const struct of_device_id *device;
-
- if (!np)
- return -ENODEV;
- device = of_match_device(stmmac_dt_ids, &pdev->dev);
- if (!device)
- return -ENODEV;
-
- if (device->data) {
- const struct stmmac_of_data *data = device->data;
- plat->has_gmac = data->has_gmac;
- plat->enh_desc = data->enh_desc;
- plat->tx_coe = data->tx_coe;
- plat->rx_coe = data->rx_coe;
- plat->bugged_jumbo = data->bugged_jumbo;
- plat->pmt = data->pmt;
- plat->riwt_off = data->riwt_off;
- plat->fix_mac_speed = data->fix_mac_speed;
- plat->bus_setup = data->bus_setup;
- plat->setup = data->setup;
- plat->free = data->free;
- plat->init = data->init;
- plat->exit = data->exit;
- }
+ plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
+ if (!plat)
+ return ERR_PTR(-ENOMEM);
*mac = of_get_mac_address(np);
plat->interface = of_get_phy_mode(np);
@@ -168,13 +129,24 @@ static int stmmac_probe_config_dt(struct
/* Default to phy auto-detection */
plat->phy_addr = -1;
+ /* If we find a phy-handle property, use it as the PHY */
+ plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
+
+ /* If phy-handle is not specified, check if we have a fixed-phy */
+ if (!plat->phy_node && of_phy_is_fixed_link(np)) {
+ if ((of_phy_register_fixed_link(np) < 0))
+ return ERR_PTR(-ENODEV);
+
+ plat->phy_node = of_node_get(np);
+ }
+
/* "snps,phy-addr" is not a standard property. Mark it as deprecated
* and warn of its use. Remove this when phy node support is added.
*/
if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
- if (plat->phy_bus_name)
+ if (plat->phy_node || plat->phy_bus_name)
plat->mdio_bus_data = NULL;
else
plat->mdio_bus_data =
@@ -194,6 +166,12 @@ static int stmmac_probe_config_dt(struct
*/
plat->maxmtu = JUMBO_LEN;
+ /* Set default value for multicast hash bins */
+ plat->multicast_filter_bins = HASH_TABLE_SIZE;
+
+ /* Set default value for unicast filter entries */
+ plat->unicast_filter_entries = 1;
+
/*
* Currently only the properties needed on SPEAr600
* are provided. All other properties should be added
@@ -232,8 +210,10 @@ static int stmmac_probe_config_dt(struct
if (of_find_property(np, "snps,pbl", NULL)) {
dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
GFP_KERNEL);
- if (!dma_cfg)
- return -ENOMEM;
+ if (!dma_cfg) {
+ of_node_put(np);
+ return ERR_PTR(-ENOMEM);
+ }
plat->dma_cfg = dma_cfg;
of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
dma_cfg->fixed_burst =
@@ -250,45 +230,34 @@ static int stmmac_probe_config_dt(struct
pr_warn("force_sf_dma_mode is ignored if force_thresh_dma_mode is set.");
}
- return 0;
+ return plat;
}
#else
-static int stmmac_probe_config_dt(struct platform_device *pdev,
- struct plat_stmmacenet_data *plat,
- const char **mac)
+struct plat_stmmacenet_data *
+stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
{
- return -ENOSYS;
+ return ERR_PTR(-ENOSYS);
}
#endif /* CONFIG_OF */
+EXPORT_SYMBOL_GPL(stmmac_probe_config_dt);
-/**
- * stmmac_pltfr_probe - platform driver probe.
- * @pdev: platform device pointer
- * Description: platform_device probe function. It is to allocate
- * the necessary platform resources, invoke custom helper (if required) and
- * invoke the main probe function.
- */
-static int stmmac_pltfr_probe(struct platform_device *pdev)
+int stmmac_get_platform_resources(struct platform_device *pdev,
+ struct stmmac_resources *stmmac_res)
{
- int ret = 0;
struct resource *res;
- struct device *dev = &pdev->dev;
- void __iomem *addr = NULL;
- struct stmmac_priv *priv = NULL;
- struct plat_stmmacenet_data *plat_dat = NULL;
- const char *mac = NULL;
- int irq, wol_irq, lpi_irq;
+
+ memset(stmmac_res, 0, sizeof(*stmmac_res));
/* Get IRQ information early to have an ability to ask for deferred
* probe if needed before we went too far with resource allocation.
*/
- irq = platform_get_irq_byname(pdev, "macirq");
- if (irq < 0) {
- if (irq != -EPROBE_DEFER) {
- dev_err(dev,
+ stmmac_res->irq = platform_get_irq_byname(pdev, "macirq");
+ if (stmmac_res->irq < 0) {
+ if (stmmac_res->irq != -EPROBE_DEFER) {
+ dev_err(&pdev->dev,
"MAC IRQ configuration information not found\n");
}
- return irq;
+ return stmmac_res->irq;
}
/* On some platforms e.g. SPEAr the wake up irq differs from the mac irq
@@ -298,82 +267,23 @@ static int stmmac_pltfr_probe(struct pla
* In case the wake up interrupt is not passed from the platform
* so the driver will continue to use the mac irq (ndev->irq)
*/
- wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq");
- if (wol_irq < 0) {
- if (wol_irq == -EPROBE_DEFER)
+ stmmac_res->wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq");
+ if (stmmac_res->wol_irq < 0) {
+ if (stmmac_res->wol_irq == -EPROBE_DEFER)
return -EPROBE_DEFER;
- wol_irq = irq;
+ stmmac_res->wol_irq = stmmac_res->irq;
}
- lpi_irq = platform_get_irq_byname(pdev, "eth_lpi");
- if (lpi_irq == -EPROBE_DEFER)
+ stmmac_res->lpi_irq = platform_get_irq_byname(pdev, "eth_lpi");
+ if (stmmac_res->lpi_irq == -EPROBE_DEFER)
return -EPROBE_DEFER;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- addr = devm_ioremap_resource(dev, res);
- if (IS_ERR(addr))
- return PTR_ERR(addr);
-
- plat_dat = dev_get_platdata(&pdev->dev);
-
- if (!plat_dat)
- plat_dat = devm_kzalloc(&pdev->dev,
- sizeof(struct plat_stmmacenet_data),
- GFP_KERNEL);
- if (!plat_dat) {
- pr_err("%s: ERROR: no memory", __func__);
- return -ENOMEM;
- }
-
- /* Set default value for multicast hash bins */
- plat_dat->multicast_filter_bins = HASH_TABLE_SIZE;
+ stmmac_res->addr = devm_ioremap_resource(&pdev->dev, res);
- /* Set default value for unicast filter entries */
- plat_dat->unicast_filter_entries = 1;
-
- if (pdev->dev.of_node) {
- ret = stmmac_probe_config_dt(pdev, plat_dat, &mac);
- if (ret) {
- pr_err("%s: main dt probe failed", __func__);
- return ret;
- }
- }
-
- /* Custom setup (if needed) */
- if (plat_dat->setup) {
- plat_dat->bsp_priv = plat_dat->setup(pdev);
- if (IS_ERR(plat_dat->bsp_priv))
- return PTR_ERR(plat_dat->bsp_priv);
- }
-
- /* Custom initialisation (if needed)*/
- if (plat_dat->init) {
- ret = plat_dat->init(pdev, plat_dat->bsp_priv);
- if (unlikely(ret))
- return ret;
- }
-
- priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, addr);
- if (IS_ERR(priv)) {
- pr_err("%s: main driver probe failed", __func__);
- return PTR_ERR(priv);
- }
-
- /* Copy IRQ values to priv structure which is now avaialble */
- priv->dev->irq = irq;
- priv->wol_irq = wol_irq;
- priv->lpi_irq = lpi_irq;
-
- /* Get MAC address if available (DT) */
- if (mac)
- memcpy(priv->dev->dev_addr, mac, ETH_ALEN);
-
- platform_set_drvdata(pdev, priv->dev);
-
- pr_debug("STMMAC platform driver registration completed");
-
- return 0;
+ return PTR_ERR_OR_ZERO(stmmac_res->addr);
}
+EXPORT_SYMBOL_GPL(stmmac_get_platform_resources);
/**
* stmmac_pltfr_remove
@@ -381,7 +291,7 @@ static int stmmac_pltfr_probe(struct pla
* Description: this function calls the main to free the net resources
* and calls the platforms hook and release the resources (e.g. mem).
*/
-static int stmmac_pltfr_remove(struct platform_device *pdev)
+int stmmac_pltfr_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct stmmac_priv *priv = netdev_priv(ndev);
@@ -390,11 +300,9 @@ static int stmmac_pltfr_remove(struct pl
if (priv->plat->exit)
priv->plat->exit(pdev, priv->plat->bsp_priv);
- if (priv->plat->free)
- priv->plat->free(pdev, priv->plat->bsp_priv);
-
return ret;
}
+EXPORT_SYMBOL_GPL(stmmac_pltfr_remove);
#ifdef CONFIG_PM_SLEEP
/**
@@ -438,21 +346,10 @@ static int stmmac_pltfr_resume(struct de
}
#endif /* CONFIG_PM_SLEEP */
-static SIMPLE_DEV_PM_OPS(stmmac_pltfr_pm_ops,
- stmmac_pltfr_suspend, stmmac_pltfr_resume);
-
-static struct platform_driver stmmac_pltfr_driver = {
- .probe = stmmac_pltfr_probe,
- .remove = stmmac_pltfr_remove,
- .driver = {
- .name = STMMAC_RESOURCE_NAME,
- .pm = &stmmac_pltfr_pm_ops,
- .of_match_table = of_match_ptr(stmmac_dt_ids),
- },
-};
-
-module_platform_driver(stmmac_pltfr_driver);
+SIMPLE_DEV_PM_OPS(stmmac_pltfr_pm_ops, stmmac_pltfr_suspend,
+ stmmac_pltfr_resume);
+EXPORT_SYMBOL_GPL(stmmac_pltfr_pm_ops);
-MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PLATFORM driver");
+MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet platform support");
MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
MODULE_LICENSE("GPL");
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
@@ -19,11 +19,15 @@
#ifndef __STMMAC_PLATFORM_H__
#define __STMMAC_PLATFORM_H__
-extern const struct stmmac_of_data meson6_dwmac_data;
-extern const struct stmmac_of_data sun7i_gmac_data;
-extern const struct stmmac_of_data stih4xx_dwmac_data;
-extern const struct stmmac_of_data stid127_dwmac_data;
-extern const struct stmmac_of_data socfpga_gmac_data;
-extern const struct stmmac_of_data rk3288_gmac_data;
+#include "stmmac.h"
+
+struct plat_stmmacenet_data *
+stmmac_probe_config_dt(struct platform_device *pdev, const char **mac);
+
+int stmmac_get_platform_resources(struct platform_device *pdev,
+ struct stmmac_resources *stmmac_res);
+
+int stmmac_pltfr_remove(struct platform_device *pdev);
+extern const struct dev_pm_ops stmmac_pltfr_pm_ops;
#endif /* __STMMAC_PLATFORM_H__ */
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -99,6 +99,7 @@ struct plat_stmmacenet_data {
int phy_addr;
int interface;
struct stmmac_mdio_bus_data *mdio_bus_data;
+ struct device_node *phy_node;
struct stmmac_dma_cfg *dma_cfg;
int clk_csr;
int has_gmac;
@@ -118,30 +119,8 @@ struct plat_stmmacenet_data {
int rx_fifo_size;
void (*fix_mac_speed)(void *priv, unsigned int speed);
void (*bus_setup)(void __iomem *ioaddr);
- void *(*setup)(struct platform_device *pdev);
- void (*free)(struct platform_device *pdev, void *priv);
int (*init)(struct platform_device *pdev, void *priv);
void (*exit)(struct platform_device *pdev, void *priv);
- void *custom_cfg;
- void *custom_data;
void *bsp_priv;
};
-
-/* of_data for SoC glue layer device tree bindings */
-
-struct stmmac_of_data {
- int has_gmac;
- int enh_desc;
- int tx_coe;
- int rx_coe;
- int bugged_jumbo;
- int pmt;
- int riwt_off;
- void (*fix_mac_speed)(void *priv, unsigned int speed);
- void (*bus_setup)(void __iomem *ioaddr);
- void *(*setup)(struct platform_device *pdev);
- void (*free)(struct platform_device *pdev, void *priv);
- int (*init)(struct platform_device *pdev, void *priv);
- void (*exit)(struct platform_device *pdev, void *priv);
-};
#endif