mirror of https://github.com/hak5/openwrt.git
168 lines
4.8 KiB
C
168 lines
4.8 KiB
C
/*
|
|
* Copyright (C) 2006,2007 Gabor Juhos
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#ifndef _MYLOADER_H_
|
|
#define _MYLOADER_H_
|
|
|
|
/*
|
|
* Firmware file format:
|
|
*
|
|
* <header>
|
|
* [<block descriptor 0>]
|
|
* ...
|
|
* [<block descriptor n>]
|
|
* <null block descriptor>
|
|
* [<block data 0>]
|
|
* ...
|
|
* [<block data n>]
|
|
*
|
|
*
|
|
*/
|
|
|
|
/* Myloader specific magic numbers */
|
|
#define MYLO_MAGIC_FIRMWARE 0x4C594D00
|
|
#define MYLO_MAGIC_20021103 0x20021103
|
|
#define MYLO_MAGIC_20021107 0x20021107
|
|
|
|
#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107
|
|
#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103
|
|
#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103
|
|
|
|
/*
|
|
* Addresses of the data structures provided by MyLoader
|
|
*/
|
|
#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */
|
|
#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */
|
|
#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */
|
|
#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */
|
|
|
|
/* Vendor ID's (seems to be same as the PCI vendor ID's) */
|
|
#define VENID_COMPEX 0x11F6
|
|
|
|
/* Devices based on the ADM5120 */
|
|
#define DEVID_COMPEX_NP27G 0x0078
|
|
#define DEVID_COMPEX_NP28G 0x044C
|
|
#define DEVID_COMPEX_NP28GHS 0x044E
|
|
#define DEVID_COMPEX_WP54Gv1C 0x0514
|
|
#define DEVID_COMPEX_WP54G 0x0515
|
|
#define DEVID_COMPEX_WP54AG 0x0546
|
|
#define DEVID_COMPEX_WPP54AG 0x0550
|
|
#define DEVID_COMPEX_WPP54G 0x0555
|
|
|
|
/* Devices based on the IXP422 */
|
|
#define DEVID_COMPEX_WP18 0x047E
|
|
#define DEVID_COMPEX_NP18A 0x0489
|
|
|
|
/* Other devices */
|
|
#define DEVID_COMPEX_NP26G8M 0x03E8
|
|
#define DEVID_COMPEX_NP26G16M 0x03E9
|
|
|
|
struct mylo_fw_header {
|
|
uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */
|
|
uint32_t crc; /* CRC of the whole firmware */
|
|
uint32_t res0; /* unknown/unused */
|
|
uint32_t res1; /* unknown/unused */
|
|
uint16_t vid; /* vendor ID */
|
|
uint16_t did; /* device ID */
|
|
uint16_t svid; /* sub vendor ID */
|
|
uint16_t sdid; /* sub device ID */
|
|
uint32_t rev; /* device revision */
|
|
uint32_t fwhi; /* FIXME: firmware version high? */
|
|
uint32_t fwlo; /* FIXME: firmware version low? */
|
|
uint32_t flags; /* firmware flags */
|
|
};
|
|
|
|
#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */
|
|
#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */
|
|
|
|
struct mylo_fw_blockdesc {
|
|
uint32_t type; /* block type */
|
|
uint32_t addr; /* relative address to flash start */
|
|
uint32_t dlen; /* size of block data in bytes */
|
|
uint32_t blen; /* total size of block in bytes */
|
|
};
|
|
|
|
#define FW_DESC_TYPE_UNUSED 0
|
|
#define FW_DESC_TYPE_USED 1
|
|
|
|
struct mylo_partition {
|
|
uint16_t flags; /* partition flags */
|
|
uint16_t type; /* type of the partition */
|
|
uint32_t addr; /* relative address of the partition from the
|
|
flash start */
|
|
uint32_t size; /* size of the partition in bytes */
|
|
uint32_t param; /* if this is the active partition, the
|
|
MyLoader load code to this address */
|
|
};
|
|
|
|
#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition,
|
|
* MyLoader loads firmware from here */
|
|
#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */
|
|
#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */
|
|
#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM
|
|
* before decompression */
|
|
#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */
|
|
|
|
#define PARTITION_TYPE_FREE 0
|
|
#define PARTITION_TYPE_USED 1
|
|
|
|
#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the
|
|
partition table */
|
|
|
|
struct mylo_partition_table {
|
|
uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */
|
|
uint32_t res0; /* unknown/unused */
|
|
uint32_t res1; /* unknown/unused */
|
|
uint32_t res2; /* unknown/unused */
|
|
struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
|
|
};
|
|
|
|
struct mylo_partition_header {
|
|
uint32_t len; /* length of the partition data */
|
|
uint32_t crc; /* CRC value of the partition data */
|
|
};
|
|
|
|
struct mylo_system_params {
|
|
uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */
|
|
uint32_t res0;
|
|
uint32_t res1;
|
|
uint32_t mylo_ver;
|
|
uint16_t vid; /* Vendor ID */
|
|
uint16_t did; /* Device ID */
|
|
uint16_t svid; /* Sub Vendor ID */
|
|
uint16_t sdid; /* Sub Device ID */
|
|
uint32_t rev; /* device revision */
|
|
uint32_t fwhi;
|
|
uint32_t fwlo;
|
|
uint32_t tftp_addr;
|
|
uint32_t prog_start;
|
|
uint32_t flash_size; /* Size of boot FLASH in bytes */
|
|
uint32_t dram_size; /* Size of onboard RAM in bytes */
|
|
};
|
|
|
|
|
|
struct mylo_eth_addr {
|
|
uint8_t mac[6];
|
|
uint8_t csum[2];
|
|
};
|
|
|
|
#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address
|
|
in the board parameters */
|
|
|
|
struct mylo_board_params {
|
|
uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */
|
|
uint32_t res0;
|
|
uint32_t res1;
|
|
uint32_t res2;
|
|
struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
|
|
};
|
|
|
|
#endif /* _MYLOADER_H_*/
|