mirror of https://github.com/hak5/openwrt.git
This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org
c3327f48dc
b3a29655ae0b mt76x02: fix crash on device reset
ffddb685a679 mt76x02u: check chip version on probe
7fc5f925ec35 mt76x2u: remove duplicated entry in mt76x2u_device_table
61311d9b307a mt76: introduce mt76_free_device routine
a7dfcf2e2498 mt76: move mac_work in mt76_dev
334b4cedf2b0 mt76: add mac80211 driver for MT7615 PCIe-based chipsets
edb2a001b695 mt76: add unlikely() for dma_mapping_error() check
355c07904da7 mt76: use macro for sn and seq_ctrl conversion
133bffba8bb2 add firmware for MT7615E
49d9c1b29f1d mt76: usb: reduce locking in mt76u_tx_tasklet
3e371ca35c7f mt76: set txwi_size according to the driver value
50073265559a mt76: add skb pointer to mt76_tx_info
c47a5685d00b mt76: dma: introduce skb field in mt76_txwi_cache
9029560fad1f mt76: dma: add skb check for dummy pointer
e9eea3923774 mt76: mt7615: use sizeof instead of sizeof_field
98c5359e9649 Revert "mt76: fix potential deadlock on cancelling workqueues"
bc9baa7b12b9 mt76x02u: remove bogus stop on suspend
6c1cab9abafc mt76usb: fix tx/rx stop
0e674c50a5a3 mt76x02: remove bogus mutex usage
59f7bb6fbfc5 Revert "mt76: mt76x02: send no-skb tx status without holding the status lock"
b0f2a30452f0 mt76x02: avoid status_list.lock and sta->rate_ctrl_lock dependency
62054defd78a mt76: mt7603: remove query from mt7603_mcu_msg_send signature
e79d96acf597 mt76: mt7603: use standard signature for mt7603_mcu_msg_send
be8f0394e335 mt76: mt7603: initialize mt76_mcu_ops data structure
9a9c6569e987 mt76: introduce mt76_mcu_restart macro
980b91e04006 mt76: mt7603: init mcu_restart function pointer
a97db3f3ceee mt76: mt7603: run __mt76_mcu_send_msg in mt7603_mcu_send_firmware
151115f8160b mt76: mt76x02: mt76x02_poll_tx() can be static
7391f98f8b4b mt76: fix endianness sparse warnings
6c06f7381129 mt76: mt7603: report firmware version using ethtool
f06647efbd1c mt76: usb: use EP max packet aligned buffer sizes for rx
f43fccf0990e mt76: move beacon_int in mt76_dev
74ab2cf6171e mt76: move beacon_mask in mt76_dev
23c2f94deeeb mt76: add TX/RX antenna pattern capabilities
6e790e106a84 mt76: move pre_tbtt_tasklet in mt76_dev
7606c08414e5 mt76: mt7603: enable/disable pre_tbtt_tasklet in mt7603_set_channel
ff22eee58520 mt76: do not enable/disable pre_tbtt_tasklet in scan_start/scan_complete
3157385e2277 mt76: mt7603: dynamically alloc mcu req in mt7603_mcu_set_eeprom
cc674e2d1f10 mt76: mt76x02: remove useless return in mt76x02_resync_beacon_timer
6b184272ba15 mt76: move tx_napi in mt76_dev
bce63c453c85 mt76: mt7603: use napi polling for tx cleanup
4afd89e8ab20 mt76: mt7615: use napi polling for tx cleanup
2cb46830faf7 mt76: move netif_napi_del in mt76_dma_cleanup
b4ceb9f7c791 mt76: Fix a signedness bug in mt7615_add_interface()
d00dc9524068 mt76: mt7615: Use after free in mt7615_mcu_set_bcn()
4e0ccc6a2da6 mt76: mt7615: Make mt7615_irq_handler static
0fd552a55847 mt7615: mcu: simplify __mt7615_mcu_set_wtbl
50f70948ffcc mt7615: mcu: simplify __mt7615_mcu_set_sta_rec
4434d04d3c50 mt7615: mcu: remove bss_info_convert_vif_type routine
083fbb97223c mt7615: mcu: use proper msg size in mt7615_mcu_add_wtbl_bmc
f61ca8019129 mt7615: mcu: use proper msg size in mt7615_mcu_add_wtbl
35bd12d609ac mt7615: mcu: unify mt7615_mcu_add_wtbl_bmc and mt7615_mcu_del_wtbl_bmc
f8f990b9092e mt7615: mcu: remove unused parameter in mt7615_mcu_del_wtbl
965bca14795e mt7615: remove query from mt7615_mcu_msg_send signature
9b9ca18d9602 mt7615: remove dest from mt7615_mcu_msg_send signature
935b7e5edaba mt7615: mcu: remove skb_ret from mt7615_mcu_msg_send
2442db44c2ab mt7615: mcu: unify __mt7615_mcu_set_dev_info and mt7615_mcu_set_dev_info
645bc458e1ab mt7615: mcu: do not use function pointers whenever possible
40c4201c28bf mt7615: mcu: remove unused structure in mcu.h
a8834a233fa7 mt7615: mcu: use standard signature for mt7615_mcu_msg_send
824d25c44124 mt7615: initialize mt76_mcu_ops data structure
d9434275a872 mt7615: mcu: init mcu_restart function pointer
c2211e478c6e mt7615: mcu: run __mt76_mcu_send_msg in mt7615_mcu_send_firmware
cb63a06c403a mt76: mt7603: stop mac80211 queues before setting the channel
c6aaa3a2a9ea mt76: mt7615: rearrange cleanup operations in mt7615_unregister_device
97609f3708c7 mt76: mt7615: add static qualifier to mt7615_rx_poll_complete
f9dadd2d9377 mt76: mt7603: add debugfs knob to enable/disable edcca
89cda5d85498 mt7603: fix reading target tx power from eeprom
77d0e3378bd1 mt76: fix setting chan->max_power
f575da2f01a4 mt76: mt76x02: fix tx status reporting issues
a5d18dca9d3e mt76: mt76x02: fix tx reordering on rate control probing without a-mpdu
bd32a93e4996 mt76: mt76x02: remove enable from mt76x02_edcca_init signature
18386eef1d22 mt76: mt76x2u: remove mt76x02_edcca_init in mt76x2u_set_channel
da3514f6de4f mt76: mt76x2: move mutex_lock inside mt76x2_set_channel
0d4719c327ca mt76: mt76x02: run mt76x02_edcca_init atomically in mt76_edcca_set
fd5af7397257 mt76: mt76x02: fix edcca file permission
a0f51f276104 mt76: mt7615: do not process rx packets if the device is not initialized
753cdee4f6f6 mt76: mt7615: stop mcu first in mt7615_unregister_device
899efe755bae mt76: move mt76_insert_ccmp_hdr in mt76-module
6960b6e2d163 mt76: mt7615: add support for mtd eeprom parsing
4bcb0577daa5 mt76: mt7615: select wifi band according to eeprom
866f2c6cd0a2 mt76: generalize mt76_get_txpower for 4x4:4 devices
514fb04492a6 mt76: mt7615: add the capability to configure tx power
ced9d43a8a85 mt76: mt7615: init get_txpower mac80211 callback
8abd502a5f86 mt76: mt7615: rearrange locking in mt7615_config
5b9b62e0b00c mt76: move mt76_get_rate in mt76-module
661c7c8e1acc mt76: Remove set but not used variables 'pid' and 'final_mpdu'
f072c7ba2150 mt76: mt7615: enable support for mesh
28d9496205a6 mt76: mt7615: fix slow performance when enable encryption
827b9ade1672 mt76: mt7615: remove unused variable in mt7615_mcu_set_bcn
34eea1414b8b mt76: mt7615: remove key check in mt7615_mcu_set_wtbl_key
2bfae5a25251 mt76: usb: fix rx A-MSDU support
b0335320fc2c mt76: usb: do not always copy the first part of received frames
3e7fc1573c6f mt76x02: fix reporting of non-probing frames with tx status requested
0d5caead9765 Revert "mt76: usb: do not always copy the first part of received frames"
335e8c6baf77 Revert "mt76: usb: fix rx A-MSDU support"
47ddf4b722a1 mt76: revert support for TX_NEEDS_ALIGNED4_SKBS
0b6520bd1c98 mt7603: rework and fix tx status reporting
539b6796605c mt7603: improve hardware rate switching configuration
d86d6efa7214 mt76x0: fix RF frontend initialization for external PA
f476a14761ec mt76x02: fix endian issue in tx status reporting patch
f8d051785221 mt76: mt7615: simplify mt7615_mcu_set_sta_rec routine
73ff45f618fd mt76: mt7615: add support for per-chain signal strength reporting
9b67ae62d9ea mt76: mt7615: init per-channel target power
160fdc05e260 mt76: mt7615: take into account extPA when configuring tx power
2211d9370976 mt76: mt76x02u: fix sparse warnings: should it be static?
3750533a37a4 mt76: mt7615: fix incorrect settings in mesh mode
c37c1ca3fa01 mt76: mt7615: update peer's bssid when state transition occurs
9dd1089a29af mt76: mt76u: reduce rx memory footprint
0789f45e52c5 mt76: mt7615: remove cfg80211_chan_def from mt7615_set_channel signature
2dca431cd7fc mt76: move nl80211_dfs_regions in mt76_dev data structure
3386ccf7842b mt76: mt76u: get rid of {out,in}_max_packet
d680ab01cddd mt76: usb: fix rx A-MSDU support
6cafaca7225d mt7603: use READ_ONCE instead of ACCESS_ONCE
9e2e0b857710 mt76: round up length on mt76_wr_copy
e378ef1bc1e5 mt76: mt7615: fix sparse warnings: warning: restricted __le16 degrades to integer
7991dd7e25c8 mt76: mt7615: introduce mt7615_regd_notifier
901a4c7b7f8c mt76: mt7615: add hw dfs pattern detector support
57c600e5b945 mt76: mt7615: do not perform txcalibration before cac is complited
6afc9521962f mt76: mt7615: add csa support
8919516006e4 mt76: mt7615: add radar pattern test knob to debugfs
3be723cad7a9 mt76: mt7615: clean up FWDL TXQ during/after firmware upload
47fe37e22fdf mt76: mt7615: fall back to sw encryption for unsupported ciphers
bc5e0417939f mt76: mt7603: enable hardware rate up/down selection
ae760db52abc mt76: mt7615: move mt7615_mcu_set_rates to mac.c
2ae01f7e7715 mt76: mt7615: reset rate index/counters on rate table update
6f9837833baf mt76: mt7615: sync with mt7603 rate control changes
edbe88ec7c1f mt76: usb: fix endian in mt76u_copy
f43b6228facf mt76: usb: remove unneeded {put,get}_unaligned
5e1e5b75d6e8 mt76: usb: use full intermediate buffer in mt76u_copy
017d0ff097f7 mt76: mt76u: fix typo in mt76u_fill_rx_sg
2c0ccf1561c1 mt76: mt7615: always release sem in mt7615_load_patch
0c6f1a2b3c33 mt76: mt7615: introduce mt7615_mcu_send_ram_firmware routine
3dfc1eeffedf mt76: mt7615: fix sparse warnings: incorrect type in assignment (different base types)
947532099c3e mt76: mt7603: fix sparse warnings: warning: incorrect type in assignment (different base types)
e07451d27941 mt76: mt7615: fix sparse warnings: warning: cast from restricted __le16
b973bef0f87f mt7603: do not use tssi-off power value for mt7628
8fc3e6e02e96 mt76: mt7615: fix using VHT STBC rates
b21b99187a54 mt76: mt7615: fix PS buffering of action frames
3d43dd886951 mt76: mt7615: fix invalid fallback rates
0ce46825b8df mt76: mt7603: fix invalid fallback rates
3b08966d99ae Revert "mt76: usb: use full intermediate buffer in mt76u_copy"
48800e7b6088 Revert "mt76: usb: remove unneeded {put,get}_unaligned"
439354d54085 Revert "mt76: usb: fix endian in mt76u_copy"
8c1da9367beb mt76: usb: fix endian in mt76u_copy
307be50cc5f4 mt76: usb: remove unneeded {put,get}_unaligned
5d298297c00c mt76: mt76x02: use params->ssn value directly
f74d117ed41c mt76: mt7603: use params->ssn value directly
649f2e83742e mt76: mt7615: use params->ssn value directly
b647180c86be mt76: mt7615: unlock dfs bands
410923fa24de Revert accidental debugging change
3d7f7384bef0 mt76: mt7615: add missing register initialization
75656a4590a3 net: wireless: support of_get_mac_address new ERR_PTR error
fb0f432834c0 mt76: stop rx aggregation on station removal
76aada563b66 mt76: dma: reset q->rx_buf on rx reset
3245ca8b8aeb mt76: check of_get_mac_address for NULL as well to restore old kernel compat
8e495245ab3d mt76: mt7615: move mt7615_mac_get_key_info in mac.c
e4f48a8df6aa mt76: mt7615: add mt7615_mac_wtbl_addr routine
e8c95e5a41f0 mt76: mt7615: introduce mt7615_mac_wtbl_set_key routine
d998b90c4bed mt76: mt7615: remove wtbl_sec_key definition
60d279ec2762 mt76: mt7615: add set_key_cmd and mt76_wcid to mt7615_mac_wtbl_set_key signature
4947ad4eab6a mt76: introduce mt76_mmio_read_copy routine
4d9001b8ab1d mt76: mt7615: fix MT7615_WATCHDOG_TIME definition
3d6796b867b6 mt76: mt7603: fix watchdog rescheduling in mt7603_set_channel
8d7a48030005 mt76: mt7615: add 4 WMM sets support
ae0f11149248 mt76: mt7615: update cw_min/max related settings
8b7bbd017654 mt76: mt7603: fix some checkpatch warnings
e6045467848d mt76: mt7615: fix some checkpatch warnings
c415c676e255 mt76: mt76x02: fix some checkpatch warnings
f625afcedc9b mt76: switch to SPDX tag instead of verbose boilerplate text
4d57f1cee4aa mt76: mt7615: rework locking scheme for mt7615_set_channel
2becd13be766 mt76: mt7615: add Smart Carrier Sense support
20f0c196722a mt76: mt76x02: introduce mt76x02_pre_tbtt_enable and mt76x02_beacon_enable macros
ae83a05b1050 mt76: mt76x02: do not copy beacon skb in mt76x02_mac_set_beacon_enable
92fa62ace198 mt76: mt76x02u: enable multi-vif support
c6dabfe953af mt76: mt76x02u: enable survey support
1f44159b41ff mt76: mt7603: move survey_time in mt76_dev
9657e6304322 mt76: mt7615: enable survey support
af860c0decb1 mt76: move mt76_tx_tasklet in mt76 module
a9d2a28b39fc mt76: mt7603: remove unnecessary mcu queue initialization
281b10fc1fe6 mt76: mt7615: add BIP_CMAC_128 cipher support
37673a4181e4 mt76: fix some checkpatch warnings
a7fa32603981 mt76: add default implementation for mt76_sw_scan/mt76_sw_scan_complete
5c35bdf057af mt7615: apply calibration-free data from OTP
0e3baf0213c9 mt76: fix a leaked reference by adding a missing of_node_put
2d5928fef23d net: Remove dev_err() usage after platform_get_irq()
a0824197ab00 mt76: mt76x0e: disable 5GHz band for MT7630E
4d8a9f20610f mt76: do not send BAR frame on tx aggregation flush stop
2a0edbb4473b mt76: remove offchannel check in tx scheduling
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||
|---|---|---|
| .github | ||
| config | ||
| include | ||
| package | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| BSDmakefile | ||
| Config.in | ||
| LICENSE | ||
| Makefile | ||
| README | ||
| feeds.conf.default | ||
| rules.mk | ||
README
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org