mirror of https://github.com/hak5/openwrt.git
56 lines
2.3 KiB
Diff
56 lines
2.3 KiB
Diff
From 436f7ecdcc08f71ddc106b7bbe3bcbf1785f3bff Mon Sep 17 00:00:00 2001
|
|
From: Chen-Yu Tsai <wens@csie.org>
|
|
Date: Fri, 17 Jan 2014 21:24:45 +0800
|
|
Subject: [PATCH] net: stmmac: Deprecate snps, phy-addr and auto-detect PHY
|
|
address
|
|
|
|
The snps,phy-addr device tree property is non-standard, and should be
|
|
removed in favor of proper phy node support. Remove it from the binding
|
|
documents and warn if the property is still used.
|
|
|
|
Most PHYs respond to address 0, but a few don't, so auto-detect PHY
|
|
address by default, to make up for the lack of explicit address selection.
|
|
|
|
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
Documentation/devicetree/bindings/net/stmmac.txt | 1 -
|
|
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 9 ++++++++-
|
|
2 files changed, 8 insertions(+), 2 deletions(-)
|
|
|
|
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
|
|
index d132513..aefb639 100644
|
|
--- a/Documentation/devicetree/bindings/net/stmmac.txt
|
|
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
|
|
@@ -12,7 +12,6 @@ Required properties:
|
|
property
|
|
- phy-mode: String, operation mode of the PHY interface.
|
|
Supported values are: "mii", "rmii", "gmii", "rgmii".
|
|
-- snps,phy-addr phy address to connect to.
|
|
- snps,reset-gpio gpio number for phy reset.
|
|
- snps,reset-active-low boolean flag to indicate if phy reset is active low.
|
|
- snps,reset-delays-us is triplet of delays
|
|
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
|
|
index 634260e..82110f1 100644
|
|
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
|
|
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
|
|
@@ -50,7 +50,14 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
|
|
if (plat->bus_id < 0)
|
|
plat->bus_id = 0;
|
|
|
|
- of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr);
|
|
+ /* Default to phy auto-detection */
|
|
+ plat->phy_addr = -1;
|
|
+
|
|
+ /* "snps,phy-addr" is not a standard property. Mark it as deprecated
|
|
+ * and warn of its use. Remove this when phy node support is added.
|
|
+ */
|
|
+ if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
|
|
+ dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
|
|
|
|
plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
|
|
sizeof(struct stmmac_mdio_bus_data),
|
|
--
|
|
1.8.5.5
|
|
|