mirror of https://github.com/hak5/openwrt.git
283 lines
8.2 KiB
Diff
283 lines
8.2 KiB
Diff
From 3bf30f6381f9287eb99ce096bf2fa327a69c8a71 Mon Sep 17 00:00:00 2001
|
|
From: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
Date: Thu, 7 Nov 2013 12:01:48 +0100
|
|
Subject: [PATCH] clocksource: Add Allwinner SoCs HS timers driver
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
Most of the Allwinner SoCs (at this time, all but the A10) also have a
|
|
High Speed timers that are not using the 24MHz oscillator as a source
|
|
but rather the AHB clock running much faster.
|
|
|
|
The IP is slightly different between the A10s/A13 and the one used in
|
|
the A20/A31, since the latter have 4 timers available, while the former
|
|
have only 2 of them.
|
|
|
|
[dlezcano] : Fixed conflict with b788beda "Order Kconfig options
|
|
alphabetically"
|
|
|
|
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
Tested-by: Emilio López <emilio@elopez.com.ar>
|
|
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
---
|
|
.../bindings/timer/allwinner,sun5i-a13-hstimer.txt | 22 +++
|
|
arch/arm/mach-sunxi/Kconfig | 1 +
|
|
drivers/clocksource/Kconfig | 4 +
|
|
drivers/clocksource/Makefile | 1 +
|
|
drivers/clocksource/timer-sun5i.c | 192 +++++++++++++++++++++
|
|
5 files changed, 220 insertions(+)
|
|
create mode 100644 Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
|
|
create mode 100644 drivers/clocksource/timer-sun5i.c
|
|
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
|
|
@@ -0,0 +1,22 @@
|
|
+Allwinner SoCs High Speed Timer Controller
|
|
+
|
|
+Required properties:
|
|
+
|
|
+- compatible : should be "allwinner,sun5i-a13-hstimer" or
|
|
+ "allwinner,sun7i-a20-hstimer"
|
|
+- reg : Specifies base physical address and size of the registers.
|
|
+- interrupts : The interrupts of these timers (2 for the sun5i IP, 4 for the sun7i
|
|
+ one)
|
|
+- clocks: phandle to the source clock (usually the AHB clock)
|
|
+
|
|
+Example:
|
|
+
|
|
+timer@01c60000 {
|
|
+ compatible = "allwinner,sun7i-a20-hstimer";
|
|
+ reg = <0x01c60000 0x1000>;
|
|
+ interrupts = <0 51 1>,
|
|
+ <0 52 1>,
|
|
+ <0 53 1>,
|
|
+ <0 54 1>;
|
|
+ clocks = <&ahb1_gates 19>;
|
|
+};
|
|
--- a/arch/arm/mach-sunxi/Kconfig
|
|
+++ b/arch/arm/mach-sunxi/Kconfig
|
|
@@ -13,3 +13,4 @@ config ARCH_SUNXI
|
|
select PINCTRL_SUNXI
|
|
select SPARSE_IRQ
|
|
select SUN4I_TIMER
|
|
+ select SUN5I_HSTIMER
|
|
--- a/drivers/clocksource/Kconfig
|
|
+++ b/drivers/clocksource/Kconfig
|
|
@@ -37,6 +37,10 @@ config SUN4I_TIMER
|
|
select CLKSRC_MMIO
|
|
bool
|
|
|
|
+config SUN5I_HSTIMER
|
|
+ select CLKSRC_MMIO
|
|
+ bool
|
|
+
|
|
config VT8500_TIMER
|
|
bool
|
|
|
|
--- a/drivers/clocksource/Makefile
|
|
+++ b/drivers/clocksource/Makefile
|
|
@@ -22,6 +22,7 @@ obj-$(CONFIG_ARCH_MOXART) += moxart_time
|
|
obj-$(CONFIG_ARCH_MXS) += mxs_timer.o
|
|
obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
|
|
obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o
|
|
+obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o
|
|
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
|
|
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
|
|
obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o
|
|
--- /dev/null
|
|
+++ b/drivers/clocksource/timer-sun5i.c
|
|
@@ -0,0 +1,192 @@
|
|
+/*
|
|
+ * Allwinner SoCs hstimer driver.
|
|
+ *
|
|
+ * Copyright (C) 2013 Maxime Ripard
|
|
+ *
|
|
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
+ *
|
|
+ * This file is licensed under the terms of the GNU General Public
|
|
+ * License version 2. This program is licensed "as is" without any
|
|
+ * warranty of any kind, whether express or implied.
|
|
+ */
|
|
+
|
|
+#include <linux/clk.h>
|
|
+#include <linux/clockchips.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/irq.h>
|
|
+#include <linux/irqreturn.h>
|
|
+#include <linux/sched_clock.h>
|
|
+#include <linux/of.h>
|
|
+#include <linux/of_address.h>
|
|
+#include <linux/of_irq.h>
|
|
+
|
|
+#define TIMER_IRQ_EN_REG 0x00
|
|
+#define TIMER_IRQ_EN(val) BIT(val)
|
|
+#define TIMER_IRQ_ST_REG 0x04
|
|
+#define TIMER_CTL_REG(val) (0x20 * (val) + 0x10)
|
|
+#define TIMER_CTL_ENABLE BIT(0)
|
|
+#define TIMER_CTL_RELOAD BIT(1)
|
|
+#define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4)
|
|
+#define TIMER_CTL_ONESHOT BIT(7)
|
|
+#define TIMER_INTVAL_LO_REG(val) (0x20 * (val) + 0x14)
|
|
+#define TIMER_INTVAL_HI_REG(val) (0x20 * (val) + 0x18)
|
|
+#define TIMER_CNTVAL_LO_REG(val) (0x20 * (val) + 0x1c)
|
|
+#define TIMER_CNTVAL_HI_REG(val) (0x20 * (val) + 0x20)
|
|
+
|
|
+#define TIMER_SYNC_TICKS 3
|
|
+
|
|
+static void __iomem *timer_base;
|
|
+static u32 ticks_per_jiffy;
|
|
+
|
|
+/*
|
|
+ * When we disable a timer, we need to wait at least for 2 cycles of
|
|
+ * the timer source clock. We will use for that the clocksource timer
|
|
+ * that is already setup and runs at the same frequency than the other
|
|
+ * timers, and we never will be disabled.
|
|
+ */
|
|
+static void sun5i_clkevt_sync(void)
|
|
+{
|
|
+ u32 old = readl(timer_base + TIMER_CNTVAL_LO_REG(1));
|
|
+
|
|
+ while ((old - readl(timer_base + TIMER_CNTVAL_LO_REG(1))) < TIMER_SYNC_TICKS)
|
|
+ cpu_relax();
|
|
+}
|
|
+
|
|
+static void sun5i_clkevt_time_stop(u8 timer)
|
|
+{
|
|
+ u32 val = readl(timer_base + TIMER_CTL_REG(timer));
|
|
+ writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer));
|
|
+
|
|
+ sun5i_clkevt_sync();
|
|
+}
|
|
+
|
|
+static void sun5i_clkevt_time_setup(u8 timer, u32 delay)
|
|
+{
|
|
+ writel(delay, timer_base + TIMER_INTVAL_LO_REG(timer));
|
|
+}
|
|
+
|
|
+static void sun5i_clkevt_time_start(u8 timer, bool periodic)
|
|
+{
|
|
+ u32 val = readl(timer_base + TIMER_CTL_REG(timer));
|
|
+
|
|
+ if (periodic)
|
|
+ val &= ~TIMER_CTL_ONESHOT;
|
|
+ else
|
|
+ val |= TIMER_CTL_ONESHOT;
|
|
+
|
|
+ writel(val | TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
|
|
+ timer_base + TIMER_CTL_REG(timer));
|
|
+}
|
|
+
|
|
+static void sun5i_clkevt_mode(enum clock_event_mode mode,
|
|
+ struct clock_event_device *clk)
|
|
+{
|
|
+ switch (mode) {
|
|
+ case CLOCK_EVT_MODE_PERIODIC:
|
|
+ sun5i_clkevt_time_stop(0);
|
|
+ sun5i_clkevt_time_setup(0, ticks_per_jiffy);
|
|
+ sun5i_clkevt_time_start(0, true);
|
|
+ break;
|
|
+ case CLOCK_EVT_MODE_ONESHOT:
|
|
+ sun5i_clkevt_time_stop(0);
|
|
+ sun5i_clkevt_time_start(0, false);
|
|
+ break;
|
|
+ case CLOCK_EVT_MODE_UNUSED:
|
|
+ case CLOCK_EVT_MODE_SHUTDOWN:
|
|
+ default:
|
|
+ sun5i_clkevt_time_stop(0);
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+static int sun5i_clkevt_next_event(unsigned long evt,
|
|
+ struct clock_event_device *unused)
|
|
+{
|
|
+ sun5i_clkevt_time_stop(0);
|
|
+ sun5i_clkevt_time_setup(0, evt - TIMER_SYNC_TICKS);
|
|
+ sun5i_clkevt_time_start(0, false);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct clock_event_device sun5i_clockevent = {
|
|
+ .name = "sun5i_tick",
|
|
+ .rating = 340,
|
|
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
|
|
+ .set_mode = sun5i_clkevt_mode,
|
|
+ .set_next_event = sun5i_clkevt_next_event,
|
|
+};
|
|
+
|
|
+
|
|
+static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id)
|
|
+{
|
|
+ struct clock_event_device *evt = (struct clock_event_device *)dev_id;
|
|
+
|
|
+ writel(0x1, timer_base + TIMER_IRQ_ST_REG);
|
|
+ evt->event_handler(evt);
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static struct irqaction sun5i_timer_irq = {
|
|
+ .name = "sun5i_timer0",
|
|
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
|
|
+ .handler = sun5i_timer_interrupt,
|
|
+ .dev_id = &sun5i_clockevent,
|
|
+};
|
|
+
|
|
+static u32 sun5i_timer_sched_read(void)
|
|
+{
|
|
+ return ~readl(timer_base + TIMER_CNTVAL_LO_REG(1));
|
|
+}
|
|
+
|
|
+static void __init sun5i_timer_init(struct device_node *node)
|
|
+{
|
|
+ unsigned long rate;
|
|
+ struct clk *clk;
|
|
+ int ret, irq;
|
|
+ u32 val;
|
|
+
|
|
+ timer_base = of_iomap(node, 0);
|
|
+ if (!timer_base)
|
|
+ panic("Can't map registers");
|
|
+
|
|
+ irq = irq_of_parse_and_map(node, 0);
|
|
+ if (irq <= 0)
|
|
+ panic("Can't parse IRQ");
|
|
+
|
|
+ clk = of_clk_get(node, 0);
|
|
+ if (IS_ERR(clk))
|
|
+ panic("Can't get timer clock");
|
|
+ clk_prepare_enable(clk);
|
|
+ rate = clk_get_rate(clk);
|
|
+
|
|
+ writel(~0, timer_base + TIMER_INTVAL_LO_REG(1));
|
|
+ writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
|
|
+ timer_base + TIMER_CTL_REG(1));
|
|
+
|
|
+ setup_sched_clock(sun5i_timer_sched_read, 32, rate);
|
|
+ clocksource_mmio_init(timer_base + TIMER_CNTVAL_LO_REG(1), node->name,
|
|
+ rate, 340, 32, clocksource_mmio_readl_down);
|
|
+
|
|
+ ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
|
|
+
|
|
+ ret = setup_irq(irq, &sun5i_timer_irq);
|
|
+ if (ret)
|
|
+ pr_warn("failed to setup irq %d\n", irq);
|
|
+
|
|
+ /* Enable timer0 interrupt */
|
|
+ val = readl(timer_base + TIMER_IRQ_EN_REG);
|
|
+ writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG);
|
|
+
|
|
+ sun5i_clockevent.cpumask = cpu_possible_mask;
|
|
+ sun5i_clockevent.irq = irq;
|
|
+
|
|
+ clockevents_config_and_register(&sun5i_clockevent, rate,
|
|
+ TIMER_SYNC_TICKS, 0xffffffff);
|
|
+}
|
|
+CLOCKSOURCE_OF_DECLARE(sun5i_a13, "allwinner,sun5i-a13-hstimer",
|
|
+ sun5i_timer_init);
|
|
+CLOCKSOURCE_OF_DECLARE(sun7i_a20, "allwinner,sun7i-a20-hstimer",
|
|
+ sun5i_timer_init);
|