openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

John Crispin c10bdf11ff ramips: Add base-files for HiWiFi HC5x61 models HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them. The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval. v3 fix 1: Fixed model order 2: Remove manufacturer name from model name 3: Use a hacky but prettier way to get mac address. Signed-off-by: Xiaoning Kang <kangxn@163.com> SVN-Revision: 47111		2015-10-05 10:25:47 +00:00
config	linux: make IPv6 builtin if selected (saves >30KB)	2015-09-09 12:20:36 +00:00
docs	build: Prevent more gzip timestamps	2015-07-14 09:57:45 +00:00
include	kernel: update 4.1 to 4.1.10	2015-10-04 11:34:39 +00:00
package	iwinfo: nl80211: add support for reading TX power from netlink	2015-10-05 09:10:17 +00:00
scripts	scripts/om-fwupgradecfg-gen.sh: add support for the MR1750	2015-09-14 20:11:18 +00:00
target	ramips: Add base-files for HiWiFi HC5x61 models	2015-10-05 10:25:47 +00:00
toolchain	musl: re-enable des crypto support, fixes pppd MPPE issues	2015-10-01 19:50:06 +00:00
tools	quilt: add further relocatability fixes	2015-09-29 11:37:27 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	build: add integration for managing opkg package feed keys	2015-04-06 19:39:51 +00:00
BSDmakefile	…
Config.in	scripts/config: sync with linux upstream	2015-01-08 14:33:53 +00:00
LICENSE	…
Makefile	Makefile: move the cleaning of staging_dir/target* from dirclean to clean	2015-06-14 17:47:16 +00:00
README	Add 'subversion' build dependency to README	2014-08-31 12:06:32 +00:00
feeds.conf.default	feeds.conf.default: add new targets feed	2015-03-19 11:58:35 +00:00
rules.mk	rules.mk: remove GCC 4.4 and GCC 4.5 conditional	2015-08-25 07:45:42 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org