openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Markus Wigge c0ac3512d9 added 2.6.28.6 checksum SVN-Revision: 14552		2009-02-18 17:42:32 +00:00
docs	wireless.tex: update docs to reflect txpower move	2009-01-31 16:15:18 +00:00
include	added 2.6.28.6 checksum	2009-02-18 17:42:32 +00:00
package	ucmb: Fix the lowlevel protocol	2009-02-18 11:54:09 +00:00
scripts	feeds: extend 'search' to lookup in source package names too	2009-02-17 03:44:43 +00:00
target	new upstream kernel 2.6.28.6	2009-02-18 17:37:54 +00:00
toolchain	fix gcc 4.3.x segfault triggered by using -frename-registers (reproduced on arm, might be relevant for other platforms as well)	2009-02-14 00:09:27 +00:00
tools	genext2fs: update to 1.4.1	2009-02-17 03:05:10 +00:00
.gitignore	add feeds.conf to .gitignore	2008-09-23 11:06:06 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	Add menuconfig option for enabling profiling in the kernel.	2009-01-29 23:52:35 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	remove toolchain build directory as well in 'make dirclean'	2008-12-03 04:22:41 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
feeds.conf.default	Add desktop and xfce feed to feeds.conf.default	2009-01-19 19:46:03 +00:00
rules.mk	remove LINUX_HEADERS_DIR, not used anymore	2009-01-29 20:37:58 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org