openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Matthias Schiffer bb46520159 kernel: disable accept_ra by default Our commands setting accept_ra to 0 on all interfaces got lost in the transition to procd. This remained unnoticed for a long time, as we also enable forwarding on all interfaces, which prevents RA handling by default. Restore the commands, while also fixing a possible race condition in the old version. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>		2018-04-17 22:08:12 +02:00
.github	…
config	config: fix ARM64 dependency check	2018-02-10 20:16:39 +01:00
include	kernel: bump 4.14 to 4.14.34	2018-04-16 00:22:57 +03:00
package	kernel: disable accept_ra by default	2018-04-17 22:08:12 +02:00
scripts	scripts: add EVA ramboot script	2018-03-18 22:22:38 +01:00
target	mediatek: enable ramdisk support by default	2018-04-17 13:47:54 +02:00
toolchain	glibc: update glibc to 2.26+ and switch to download from git	2018-03-13 18:26:40 +01:00
tools	tools/mpfr: Update to 4.0.1	2018-04-11 21:02:50 +02:00
.gitattributes	…
.gitignore	…
BSDmakefile	…
Config.in	…
LICENSE	…
Makefile	…
README	…
feeds.conf.default	…
rules.mk	imagebuilder: reuse rootfs preparation from rootfs.mk	2018-03-07 09:59:08 +01:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org