Koen Vandeputte efb362cd93 imx6: disable dma on uart ... When this target got updated to 4.14, this patch got removed to re-evaluate if it was still needed. Extensive testing now shows this issue is still present. Let's re-add the patch to fix it for now. As the uart bus is very low bandwidth .. performance impact is negligible. Boot log: [ 22.513051] imx-uart 2020000.serial: DMA transaction error. [ 22.522721] imx-uart 2020000.serial: DMA transaction error. As a sidenote: The patch mentiones an issue with RS485, but the bootlog errors above were recorded with the uart ports in standard RS232 mode. Compile/Run-tested on imx6/GW5200 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>		2018-02-22 12:46:49 +01:00
..
base-files	treewide: move nand_do_upgrade call to platform_do_upgrade	2018-02-16 14:44:02 +01:00
image	imx6: use DTS_DIR at image build code	2018-02-10 21:02:53 +01:00
patches-4.14	imx6: disable dma on uart	2018-02-22 12:46:49 +01:00
profiles	imx6: enable the chipidea usb driver in the kernel config instead of packaging it	2017-01-10 12:10:20 +01:00
Makefile	imx6: switch to Linux 4.14	2018-02-19 09:32:43 +01:00
config-4.14	imx6: add support for Linux 4.14	2018-02-19 09:32:43 +01:00