mirror of https://github.com/hak5/openwrt.git
167 lines
4.5 KiB
Diff
167 lines
4.5 KiB
Diff
--- a/drivers/power/Kconfig
|
|
+++ b/drivers/power/Kconfig
|
|
@@ -43,6 +43,14 @@ config MAX8925_POWER
|
|
Say Y here to enable support for the battery charger in the Maxim
|
|
MAX8925 PMIC.
|
|
|
|
+config MXS_POWER
|
|
+ tristate "Freescale MXS power subsystem support"
|
|
+ depends on ARCH_MXS || COMPILE_TEST
|
|
+ help
|
|
+ Say Y here to enable support for the Freescale i.MX23/i.MX28
|
|
+ power subsystem. This is a requirement to get access to on-chip
|
|
+ regulators, battery charger and many more.
|
|
+
|
|
config WM831X_BACKUP
|
|
tristate "WM831X backup battery charger support"
|
|
depends on MFD_WM831X
|
|
--- a/drivers/power/Makefile
|
|
+++ b/drivers/power/Makefile
|
|
@@ -10,6 +10,7 @@ obj-$(CONFIG_GENERIC_ADC_BATTERY) += gen
|
|
obj-$(CONFIG_PDA_POWER) += pda_power.o
|
|
obj-$(CONFIG_APM_POWER) += apm_power.o
|
|
obj-$(CONFIG_MAX8925_POWER) += max8925_power.o
|
|
+obj-$(CONFIG_MXS_POWER) += mxs_power.o
|
|
obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o
|
|
obj-$(CONFIG_WM831X_POWER) += wm831x_power.o
|
|
obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
|
|
--- /dev/null
|
|
+++ b/drivers/power/mxs_power.c
|
|
@@ -0,0 +1,136 @@
|
|
+/*
|
|
+ * Freescale MXS power subsystem
|
|
+ *
|
|
+ * Copyright (C) 2014 Stefan Wahren
|
|
+ *
|
|
+ * Inspired by imx-bootlets
|
|
+ */
|
|
+
|
|
+/*
|
|
+ * The code contained herein is licensed under the GNU General Public
|
|
+ * License. You may obtain a copy of the GNU General Public License
|
|
+ * Version 2 or later at the following locations:
|
|
+ *
|
|
+ * http://www.opensource.org/licenses/gpl-license.html
|
|
+ * http://www.gnu.org/copyleft/gpl.html
|
|
+ */
|
|
+
|
|
+#include <linux/device.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/of.h>
|
|
+#include <linux/of_platform.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/power_supply.h>
|
|
+#include <linux/stmp_device.h>
|
|
+#include <linux/types.h>
|
|
+
|
|
+#define BM_POWER_CTRL_POLARITY_VBUSVALID BIT(5)
|
|
+#define BM_POWER_CTRL_VBUSVALID_IRQ BIT(4)
|
|
+#define BM_POWER_CTRL_ENIRQ_VBUS_VALID BIT(3)
|
|
+
|
|
+#define HW_POWER_5VCTRL_OFFSET 0x10
|
|
+
|
|
+#define BM_POWER_5VCTRL_VBUSVALID_THRESH (7 << 8)
|
|
+#define BM_POWER_5VCTRL_PWDN_5VBRNOUT BIT(7)
|
|
+#define BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT BIT(6)
|
|
+#define BM_POWER_5VCTRL_VBUSVALID_5VDETECT BIT(4)
|
|
+
|
|
+#define HW_POWER_5VCTRL_VBUSVALID_THRESH_4_40V (5 << 8)
|
|
+
|
|
+struct mxs_power_data {
|
|
+ void __iomem *base_addr;
|
|
+ struct power_supply *ac;
|
|
+};
|
|
+
|
|
+static enum power_supply_property mxs_power_ac_props[] = {
|
|
+ POWER_SUPPLY_PROP_ONLINE,
|
|
+};
|
|
+
|
|
+static int mxs_power_ac_get_property(struct power_supply *psy,
|
|
+ enum power_supply_property psp,
|
|
+ union power_supply_propval *val)
|
|
+{
|
|
+ int ret = 0;
|
|
+
|
|
+ switch (psp) {
|
|
+ case POWER_SUPPLY_PROP_ONLINE:
|
|
+ val->intval = 1;
|
|
+ break;
|
|
+ default:
|
|
+ ret = -EINVAL;
|
|
+ break;
|
|
+ }
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static const struct of_device_id of_mxs_power_match[] = {
|
|
+ { .compatible = "fsl,imx23-power" },
|
|
+ { .compatible = "fsl,imx28-power" },
|
|
+ { /* end */ }
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, of_mxs_power_match);
|
|
+
|
|
+static const struct power_supply_desc ac_desc = {
|
|
+ .properties = mxs_power_ac_props,
|
|
+ .num_properties = ARRAY_SIZE(mxs_power_ac_props),
|
|
+ .get_property = mxs_power_ac_get_property,
|
|
+ .name = "ac",
|
|
+ .type = POWER_SUPPLY_TYPE_MAINS,
|
|
+};
|
|
+
|
|
+static int mxs_power_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct device *dev = &pdev->dev;
|
|
+ struct device_node *np = dev->of_node;
|
|
+ struct resource *res;
|
|
+ struct mxs_power_data *data;
|
|
+ struct power_supply_config psy_cfg = {};
|
|
+ void __iomem *v5ctrl_addr;
|
|
+
|
|
+ if (!np) {
|
|
+ dev_err(dev, "missing device tree\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
+ if (!data)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ data->base_addr = devm_ioremap_resource(dev, res);
|
|
+ if (IS_ERR(data->base_addr))
|
|
+ return PTR_ERR(data->base_addr);
|
|
+
|
|
+ psy_cfg.drv_data = data;
|
|
+
|
|
+ data->ac = devm_power_supply_register(dev, &ac_desc, &psy_cfg);
|
|
+ if (IS_ERR(data->ac))
|
|
+ return PTR_ERR(data->ac);
|
|
+
|
|
+ platform_set_drvdata(pdev, data);
|
|
+
|
|
+ v5ctrl_addr = data->base_addr + HW_POWER_5VCTRL_OFFSET;
|
|
+
|
|
+ /* Make sure the current limit of the linregs are disabled. */
|
|
+ writel(BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT,
|
|
+ v5ctrl_addr + STMP_OFFSET_REG_CLR);
|
|
+
|
|
+ return of_platform_populate(np, NULL, NULL, dev);
|
|
+}
|
|
+
|
|
+static struct platform_driver mxs_power_driver = {
|
|
+ .driver = {
|
|
+ .name = "mxs_power",
|
|
+ .of_match_table = of_mxs_power_match,
|
|
+ },
|
|
+ .probe = mxs_power_probe,
|
|
+};
|
|
+
|
|
+module_platform_driver(mxs_power_driver);
|
|
+
|
|
+MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>");
|
|
+MODULE_DESCRIPTION("Freescale MXS power subsystem");
|
|
+MODULE_LICENSE("GPL v2");
|