openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Alexandros C. Couloumbis b5cfd7bde5 add lzma/jffs2 patches for 2.6.34 SVN-Revision: 20845		2010-04-13 21:45:03 +00:00
docs	Add documentation for passphrase option.	2009-09-24 21:50:17 +00:00
include	don't use lzma/jffs2 on <2.6.33, set lzma/jffs2 as default for >=2.6.33. switch verbose mode on compresor statistics.	2010-04-13 21:36:58 +00:00
package	option to allow boot to run to completion before starting shell	2010-04-13 19:57:25 +00:00
scripts	rework board detection	2010-03-18 23:35:21 +00:00
target	add lzma/jffs2 patches for 2.6.34	2010-04-13 21:45:03 +00:00
toolchain	toolchain/binutils: building gas for arm-*-uclibc systems requires linking with -lm	2010-03-30 08:01:35 +00:00
tools	remove 'svn:executable' property	2010-04-12 17:08:57 +00:00
.gitignore	.gitignore: ignore vim swap files	2009-12-16 13:39:52 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	select LZMA compressed initramfs by default for ramips	2010-03-31 09:58:29 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	2009-05-28 18:40:37 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	add a src-link example to feeds.conf.default	2009-12-13 20:46:30 +00:00
rules.mk	fix path to libgcc.a in LIBGCC_S	2010-03-30 04:04:47 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org