hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/target/linux
History
Daniel Golle b439d3bfb5 ath79: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE 
On AR934x this UART is usually not initialized by the bootloader
as it is only used as a secondary serial port while the primary
UART is a newly introduced NS16550-compatible.
In order to make use of the ar933x-uart on AR934x without RTS/CTS
hardware flow control, one needs to set the
UART_CS_{RX,TX}_READY_ORIDE bits as other than on AR933x where this
UART is used as primary/console, the bootloader on AR934x typically
doesn't set those bits.
Setting them explicitely on AR933x does not do any harm, so just set
them unconditionally.

Tested-by: Chuanhong Guo <gch981213@gmail.com
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 		2020-02-07 12:52:56 +02:00
..
apm821xx kernel: bump 4.19 to 4.19.101 2020-02-04 18:10:13 +01:00
ar71xx kernel: bump 4.14 to 4.14.167 2020-01-24 13:14:33 +01:00
arc770 arc770: gen_axs10x_sdcard_img.sh: switch to /bin/sh 2019-12-31 01:27:32 +01:00
archs38 archs38: gen_axs10x_sdcard_img.sh: switch to /bin/sh 2019-12-31 01:26:35 +01:00
armvirt treewide: Remove self from MAINTAINER entries 2019-12-23 13:18:04 -08:00
at91 at91: gen_at91_sdcard_img.sh: switch to /bin/sh 2019-12-31 01:25:44 +01:00
ath25
…
ath79 ath79: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE 2020-02-07 12:52:56 +02:00
bcm53xx bcm53xx: build images for Luxul ABR-4500 and XBR-4500 routers 2020-02-07 09:31:22 +01:00
brcm47xx kernel: bump 4.19 to 4.19.101 2020-02-04 18:10:13 +01:00
brcm63xx kernel: bump 4.19 to 4.19.101 2020-02-04 18:10:13 +01:00
brcm2708 brcm2708: update to latest patches from RPi foundation 2020-02-04 19:14:13 +01:00
cns3xxx kernel: bump 4.19 to 4.19.86 2019-11-29 09:59:49 +01:00
gemini gemini: dns313_gen_hdd_img.sh: switch to /bin/sh 2019-12-31 01:23:24 +01:00
generic kernel: remove duplicate flash chip definition 2020-02-06 19:35:54 +02:00
imx6 kernel: Deactivate CONFIG_SFP in generic config 2019-12-23 15:25:36 +01:00
ipq40xx kernel: bump 4.19 to 4.19.101 2020-02-04 18:10:13 +01:00
ipq806x kernel: bump 4.19 to 4.19.101 2020-02-04 18:10:13 +01:00
kirkwood kirkwood: exploit BOARD_NAME to set DEVICE_DTS and SUPPORTED_DEVICES 2020-01-23 14:27:12 +01:00
lantiq lantiq: tidy up image/Makefile 2020-01-24 18:52:41 +01:00
layerscape kernel: bump 4.14 to 4.14.169 2020-02-04 18:10:13 +01:00
malta malta: enable HighMem on MIPS32 2020-01-15 22:35:48 +01:00
mediatek kernel: bump 4.19 to 4.19.101 2020-02-04 18:10:13 +01:00
mpc85xx treewide: move mktplinkfw to tplink-v1-image in image-commands.mk 2020-01-08 16:15:29 +01:00
mvebu mvebu: image: align subtargets makefile names 2020-02-01 20:02:36 +01:00
mxs mxs: gen_sdcard_ext4_ext4.sh: use /bin/sh 2019-12-31 01:19:48 +01:00
octeon octeon: apply vendor_model scheme to device definition/image name 2020-01-26 23:00:26 +01:00
octeontx kernel: bump 4.14 to 4.14.160 2019-12-24 17:45:54 +01:00
omap omap: gen_omap_sdcard_img.sh: use /bin/sh 2019-12-31 01:17:09 +01:00
oxnas kernel: bump 4.14 to 4.14.158 2019-12-10 09:50:42 +01:00
pistachio kernel: bump 4.14 to 4.14.169 2020-02-04 18:10:13 +01:00
ramips ramips: add support for I-O DATA WN-AX1167GR2 2020-02-05 17:03:34 +01:00
rb532 rb532: gen_image.sh: use /bin/sh 2019-12-31 01:16:17 +01:00
samsung samsung: add subtarget condition for device 2020-01-03 00:04:22 +01:00
sunxi kernel: bump 4.14 to 4.14.169 2020-02-04 18:10:13 +01:00
tegra x86,tegra,mvebu: image: use common reproducible IMG_PART_SIGNATURE 2019-11-11 16:37:13 +01:00
uml treewide: Remove self from MAINTAINER entries 2019-12-23 13:18:04 -08:00
x86 kernel: bump 4.19 to 4.19.90 2019-12-24 15:34:43 +01:00
zynq zynq: derive DEVICE_DTS from device definition name 2020-01-21 14:26:04 +01:00
Makefile
…