This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org
 
 
 
 
 
 
Go to file
Lars-Peter Clausen b4066ae91a Fix freerunner gsm modem pm.
SVN-Revision: 16609
2009-06-28 20:25:00 +00:00
docs add a short note on how to use OpenWrt for daily work, covering the use of quilt inside of OpenWrt, updating kernel, packages and patches 2009-06-28 16:05:35 +00:00
include add preliminary coldfire v4e support 2009-06-21 18:34:07 +00:00
package include arpfilter and arp_mangle in the kmod-arptables modules (#5410) 2009-06-28 06:18:22 +00:00
scripts Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason. 2009-06-08 21:17:58 +00:00
target Fix freerunner gsm modem pm. 2009-06-28 20:25:00 +00:00
toolchain enable software floating point emulation by default for mips and mipsel targets 2009-06-28 15:49:46 +00:00
tools firmware-utils: add a tool to compute crc value for the 5gxi firmware 2009-06-25 09:41:06 +00:00
.gitignore add logs/ to .gitignore 2009-04-24 01:04:57 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in Add FEATURE ramdisk to be able to select the use of INITRAMFS for a sub-target 2009-03-18 15:57:18 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 2009-05-28 18:40:37 +00:00
README change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 2008-12-31 14:52:23 +00:00
feeds.conf.default switch to LuCI 0.9.x branch 2009-06-10 23:55:19 +00:00
rules.mk Set TARGET_CXX to 'no' if c++ is not enabled in the toolchain. 2009-05-30 15:48:44 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org