openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Imre Kaloz b359ab764f nuke the magicbox target and incorporate a rewritten port into ppc40x - note: no CF driver for now SVN-Revision: 13358		2008-11-26 10:06:34 +00:00
docs	update wireless documentation to reflect broadcom config changes	2008-11-16 19:57:49 +00:00
include	use the default kernel target on powerpc	2008-11-26 09:51:36 +00:00
package	Hardware crypto modules require CONFIG_CRYPTO_HW=y to be set (#3883 ), thanks Norbert	2008-11-24 12:42:13 +00:00
scripts	Fix indention.	2008-11-22 22:53:38 +00:00
target	nuke the magicbox target and incorporate a rewritten port into ppc40x - note: no CF driver for now	2008-11-26 10:06:34 +00:00
toolchain	switch to gcc 4.2.4 for avr32	2008-11-25 18:35:48 +00:00
tools	Directly use the kent sourceforge mirrors, previous are in timeout	2008-11-17 19:52:06 +00:00
.gitignore	add feeds.conf to .gitignore	2008-09-23 11:06:06 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	Adds support for using a local clone of a git tree	2008-10-10 10:07:45 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	rework parallel building to get rid of some warnings and add back support for parallelizing the kernel build fixes #3882	2008-08-16 16:59:47 +00:00
README	add information about the tex4ht requirement for the docs	2007-02-26 01:06:41 +00:00
feeds.conf.default	Switched LuCI-SVN to another server	2008-10-16 14:57:50 +00:00
rules.mk	fix whitespace order in cflags without CONFIG_DEBUG to prevent breakage in some packages' configure step	2008-09-13 17:41:02 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org