openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Imre Kaloz b15f8f765a add support for and switch to XZ compressed kernels on ARM SVN-Revision: 27518		2011-07-07 10:26:16 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	allow targets to define a default subtarget when using automatic subtarget detection from r27407	2011-07-04 11:21:37 +00:00
package	add perf	2011-07-07 09:43:04 +00:00
scripts	allow targets to define a default subtarget when using automatic subtarget detection from r27407	2011-07-04 11:21:37 +00:00
target	add support for and switch to XZ compressed kernels on ARM	2011-07-07 10:26:16 +00:00
toolchain	uclibc: backport FTS support	2011-07-07 09:42:57 +00:00
tools	tools/firmware-utils: add yet another buffalo tool	2011-07-06 08:04:53 +00:00
.gitignore	add vim temp files (*~) to .gitignore	2011-04-29 15:11:57 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add menuconfig option to enable log files during build process	2011-07-03 17:37:31 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
rules.mk	add menuconfig option to enable log files during build process	2011-07-03 17:37:31 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org