mirror of https://github.com/hak5/openwrt.git
This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org
b12d752a63
Adds board support for the TP-Link TL-WR1043ND Based on the Atheros AP81 platform. Presently the RTL8366RB switch support is missing due to no driver. The ethernet works with 5 ports@1Gbit but is missing vlan support. Hope Ive done this right, First time submiting a patch. Signed-off-by: Andrew Tarabaras <andrew@advancedtechnologies.com.au> SVN-Revision: 18696 |
||
---|---|---|
docs | ||
include | ||
package | ||
scripts | ||
target | ||
toolchain | ||
tools | ||
.gitignore | ||
BSDmakefile | ||
Config.in | ||
LICENSE | ||
Makefile | ||
README | ||
feeds.conf.default | ||
rules.mk |
README
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, bison, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org