mirror of https://github.com/hak5/openwrt.git
378 lines
10 KiB
Diff
378 lines
10 KiB
Diff
From 70fc4b2a6200ef7a1b99a6aa28234b919f23b43c Mon Sep 17 00:00:00 2001
|
|
From: Hauke Mehrtens <hauke@hauke-m.de>
|
|
Date: Sat, 26 Nov 2011 21:33:41 +0100
|
|
Subject: [PATCH 184/186] USB: Add driver for the bcma bus
|
|
|
|
This adds a USB driver using the generic platform device driver for the
|
|
USB controller found on the Broadcom bcma bus. The bcma bus just
|
|
exposes one device which serves the OHCI and the EHCI controller at the
|
|
same time. This driver probes for this USB controller and creates and
|
|
registers two new platform devices which will be probed by the new
|
|
generic platform device driver. This makes it possible to use the EHCI
|
|
and the OCHI controller on the bcma bus at the same time.
|
|
|
|
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
---
|
|
drivers/usb/host/Kconfig | 12 ++
|
|
drivers/usb/host/Makefile | 1 +
|
|
drivers/usb/host/bcma-hcd.c | 328 +++++++++++++++++++++++++++++++++++++++++++
|
|
3 files changed, 341 insertions(+), 0 deletions(-)
|
|
create mode 100644 drivers/usb/host/bcma-hcd.c
|
|
|
|
--- a/drivers/usb/host/Kconfig
|
|
+++ b/drivers/usb/host/Kconfig
|
|
@@ -618,3 +618,15 @@ config USB_PXA168_EHCI
|
|
help
|
|
Enable support for Marvell PXA168 SoC's on-chip EHCI
|
|
host controller
|
|
+
|
|
+config USB_HCD_BCMA
|
|
+ tristate "BCMA usb host driver"
|
|
+ depends on BCMA && EXPERIMENTAL
|
|
+ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
|
|
+ select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
|
|
+ help
|
|
+ Enbale support for the EHCI and OCHI host controller on an bcma bus.
|
|
+ It converts the bcma driver into two platform device drivers
|
|
+ for ehci and ohci.
|
|
+
|
|
+ If unsure, say N.
|
|
--- a/drivers/usb/host/Makefile
|
|
+++ b/drivers/usb/host/Makefile
|
|
@@ -37,3 +37,4 @@ obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd
|
|
obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
|
|
obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
|
|
obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o
|
|
+obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
|
|
--- /dev/null
|
|
+++ b/drivers/usb/host/bcma-hcd.c
|
|
@@ -0,0 +1,328 @@
|
|
+/*
|
|
+ * Broadcom specific Advanced Microcontroller Bus
|
|
+ * Broadcom USB-core driver (BCMA bus glue)
|
|
+ *
|
|
+ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
|
|
+ *
|
|
+ * Based on ssb-ohci driver
|
|
+ * Copyright 2007 Michael Buesch <m@bues.ch>
|
|
+ *
|
|
+ * Derived from the OHCI-PCI driver
|
|
+ * Copyright 1999 Roman Weissgaerber
|
|
+ * Copyright 2000-2002 David Brownell
|
|
+ * Copyright 1999 Linus Torvalds
|
|
+ * Copyright 1999 Gregory P. Smith
|
|
+ *
|
|
+ * Derived from the USBcore related parts of Broadcom-SB
|
|
+ * Copyright 2005-2011 Broadcom Corporation
|
|
+ *
|
|
+ * Licensed under the GNU/GPL. See COPYING for details.
|
|
+ */
|
|
+#include <linux/bcma/bcma.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/usb/hci_driver.h>
|
|
+
|
|
+MODULE_AUTHOR("Hauke Mehrtens");
|
|
+MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
|
|
+MODULE_LICENSE("GPL");
|
|
+
|
|
+struct bcma_hcd_device {
|
|
+ struct platform_device *ehci_dev;
|
|
+ struct platform_device *ohci_dev;
|
|
+};
|
|
+
|
|
+/* Wait for bitmask in a register to get set or cleared.
|
|
+ * timeout is in units of ten-microseconds.
|
|
+ */
|
|
+static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
|
|
+ int timeout)
|
|
+{
|
|
+ int i;
|
|
+ u32 val;
|
|
+
|
|
+ for (i = 0; i < timeout; i++) {
|
|
+ val = bcma_read32(dev, reg);
|
|
+ if ((val & bitmask) == bitmask)
|
|
+ return 0;
|
|
+ udelay(10);
|
|
+ }
|
|
+
|
|
+ return -ETIMEDOUT;
|
|
+}
|
|
+
|
|
+static void __devinit bcma_hcd_4716wa(struct bcma_device *dev)
|
|
+{
|
|
+#ifdef CONFIG_BCMA_DRIVER_MIPS
|
|
+ /* Work around for 4716 failures. */
|
|
+ if (dev->bus->chipinfo.id == 0x4716) {
|
|
+ u32 tmp;
|
|
+
|
|
+ tmp = bcma_cpu_clock(&dev->bus->drv_mips);
|
|
+ if (tmp >= 480000000)
|
|
+ tmp = 0x1846b; /* set CDR to 0x11(fast) */
|
|
+ else if (tmp == 453000000)
|
|
+ tmp = 0x1046b; /* set CDR to 0x10(slow) */
|
|
+ else
|
|
+ tmp = 0;
|
|
+
|
|
+ /* Change Shim mdio control reg to fix host not acking at
|
|
+ * high frequencies
|
|
+ */
|
|
+ if (tmp) {
|
|
+ bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
|
|
+ udelay(500);
|
|
+
|
|
+ bcma_write32(dev, 0x524, tmp);
|
|
+ udelay(500);
|
|
+ bcma_write32(dev, 0x524, 0x4ab);
|
|
+ udelay(500);
|
|
+ bcma_read32(dev, 0x528);
|
|
+ bcma_write32(dev, 0x528, 0x80000000);
|
|
+ }
|
|
+ }
|
|
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
|
|
+}
|
|
+
|
|
+/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
|
|
+static void __devinit bcma_hcd_init_chip(struct bcma_device *dev)
|
|
+{
|
|
+ u32 tmp;
|
|
+
|
|
+ /*
|
|
+ * USB 2.0 special considerations:
|
|
+ *
|
|
+ * 1. Since the core supports both OHCI and EHCI functions, it must
|
|
+ * only be reset once.
|
|
+ *
|
|
+ * 2. In addition to the standard SI reset sequence, the Host Control
|
|
+ * Register must be programmed to bring the USB core and various
|
|
+ * phy components out of reset.
|
|
+ */
|
|
+ if (!bcma_core_is_enabled(dev)) {
|
|
+ bcma_core_enable(dev, 0);
|
|
+ mdelay(10);
|
|
+ if (dev->id.rev >= 5) {
|
|
+ /* Enable Misc PLL */
|
|
+ tmp = bcma_read32(dev, 0x1e0);
|
|
+ tmp |= 0x100;
|
|
+ bcma_write32(dev, 0x1e0, tmp);
|
|
+ if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100))
|
|
+ printk(KERN_EMERG "Failed to enable misc PPL!\n");
|
|
+
|
|
+ /* Take out of resets */
|
|
+ bcma_write32(dev, 0x200, 0x4ff);
|
|
+ udelay(25);
|
|
+ bcma_write32(dev, 0x200, 0x6ff);
|
|
+ udelay(25);
|
|
+
|
|
+ /* Make sure digital and AFE are locked in USB PHY */
|
|
+ bcma_write32(dev, 0x524, 0x6b);
|
|
+ udelay(50);
|
|
+ tmp = bcma_read32(dev, 0x524);
|
|
+ udelay(50);
|
|
+ bcma_write32(dev, 0x524, 0xab);
|
|
+ udelay(50);
|
|
+ tmp = bcma_read32(dev, 0x524);
|
|
+ udelay(50);
|
|
+ bcma_write32(dev, 0x524, 0x2b);
|
|
+ udelay(50);
|
|
+ tmp = bcma_read32(dev, 0x524);
|
|
+ udelay(50);
|
|
+ bcma_write32(dev, 0x524, 0x10ab);
|
|
+ udelay(50);
|
|
+ tmp = bcma_read32(dev, 0x524);
|
|
+
|
|
+ if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) {
|
|
+ tmp = bcma_read32(dev, 0x528);
|
|
+ printk(KERN_EMERG
|
|
+ "USB20H mdio_rddata 0x%08x\n", tmp);
|
|
+ }
|
|
+ bcma_write32(dev, 0x528, 0x80000000);
|
|
+ tmp = bcma_read32(dev, 0x314);
|
|
+ udelay(265);
|
|
+ bcma_write32(dev, 0x200, 0x7ff);
|
|
+ udelay(10);
|
|
+
|
|
+ /* Take USB and HSIC out of non-driving modes */
|
|
+ bcma_write32(dev, 0x510, 0);
|
|
+ } else {
|
|
+ bcma_write32(dev, 0x200, 0x7ff);
|
|
+
|
|
+ udelay(1);
|
|
+ }
|
|
+
|
|
+ bcma_hcd_4716wa(dev);
|
|
+ }
|
|
+}
|
|
+
|
|
+static const struct usb_hci_pdata p_data = {
|
|
+ .flags = USB_HCI_PDATA_PORT_POWER_SET,
|
|
+ .power_set_is_on = 1,
|
|
+};
|
|
+
|
|
+static struct platform_device * __devinit
|
|
+bcma_hcd_create_pdev(struct bcma_device *dev, char *name, u32 addr)
|
|
+{
|
|
+ struct platform_device *hci_dev;
|
|
+ struct resource hci_res[2];
|
|
+ int ret = -ENOMEM;
|
|
+
|
|
+ memset(hci_res, 0, sizeof(hci_res));
|
|
+
|
|
+ hci_res[0].start = addr;
|
|
+ hci_res[0].end = hci_res[0].start + 0x1000 - 1;
|
|
+ hci_res[0].flags = IORESOURCE_MEM;
|
|
+
|
|
+ hci_res[1].start = dev->irq;
|
|
+ hci_res[1].flags = IORESOURCE_IRQ;
|
|
+
|
|
+ hci_dev = platform_device_alloc(name, 0);
|
|
+ if (!hci_dev)
|
|
+ return NULL;
|
|
+
|
|
+ hci_dev->dev.parent = &dev->dev;
|
|
+ hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
|
|
+
|
|
+ ret = platform_device_add_resources(hci_dev, hci_res,
|
|
+ ARRAY_SIZE(hci_res));
|
|
+ if (ret)
|
|
+ goto err_alloc;
|
|
+ ret = platform_device_add_data(hci_dev, &p_data, sizeof(p_data));
|
|
+ if (ret)
|
|
+ goto err_alloc;
|
|
+ ret = platform_device_add(hci_dev);
|
|
+ if (ret)
|
|
+ goto err_alloc;
|
|
+
|
|
+ return hci_dev;
|
|
+
|
|
+err_alloc:
|
|
+ platform_device_put(hci_dev);
|
|
+ return ERR_PTR(ret);
|
|
+}
|
|
+
|
|
+static int __devinit bcma_hcd_probe(struct bcma_device *dev)
|
|
+{
|
|
+ int err;
|
|
+ u16 chipid_top;
|
|
+ u32 ohci_addr;
|
|
+ struct bcma_hcd_device *usb_dev;
|
|
+ struct bcma_chipinfo *chipinfo;
|
|
+
|
|
+ chipinfo = &dev->bus->chipinfo;
|
|
+ /* USBcores are only connected on embedded devices. */
|
|
+ chipid_top = (chipinfo->id & 0xFF00);
|
|
+ if (chipid_top != 0x4700 && chipid_top != 0x5300)
|
|
+ return -ENODEV;
|
|
+
|
|
+ /* TODO: Probably need checks here; is the core connected? */
|
|
+
|
|
+ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
|
|
+ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
|
|
+ return -EOPNOTSUPP;
|
|
+
|
|
+ usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
|
|
+ if (!usb_dev)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ bcma_hcd_init_chip(dev);
|
|
+
|
|
+ /* In AI chips EHCI is addrspace 0, OHCI is 1 */
|
|
+ ohci_addr = dev->addr1;
|
|
+ if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749)
|
|
+ && chipinfo->rev == 0)
|
|
+ ohci_addr = 0x18009000;
|
|
+
|
|
+ usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, "ohci-platform",
|
|
+ ohci_addr);
|
|
+ if (IS_ERR(usb_dev->ohci_dev)) {
|
|
+ err = PTR_ERR(usb_dev->ohci_dev);
|
|
+ goto err_free_usb_dev;
|
|
+ }
|
|
+
|
|
+ usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, "ehci-platform",
|
|
+ dev->addr);
|
|
+ if (IS_ERR(usb_dev->ehci_dev)) {
|
|
+ err = PTR_ERR(usb_dev->ehci_dev);
|
|
+ goto err_unregister_ohci_dev;
|
|
+ }
|
|
+
|
|
+ bcma_set_drvdata(dev, usb_dev);
|
|
+ return 0;
|
|
+
|
|
+err_unregister_ohci_dev:
|
|
+ platform_device_unregister(usb_dev->ohci_dev);
|
|
+err_free_usb_dev:
|
|
+ kfree(usb_dev);
|
|
+ return err;
|
|
+}
|
|
+
|
|
+static void __devexit bcma_hcd_remove(struct bcma_device *dev)
|
|
+{
|
|
+ struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
|
|
+ struct platform_device *ohci_dev = usb_dev->ohci_dev;
|
|
+ struct platform_device *ehci_dev = usb_dev->ehci_dev;
|
|
+
|
|
+ if (ohci_dev)
|
|
+ platform_device_unregister(ohci_dev);
|
|
+ if (ehci_dev)
|
|
+ platform_device_unregister(ehci_dev);
|
|
+
|
|
+ bcma_core_disable(dev, 0);
|
|
+}
|
|
+
|
|
+static void bcma_hcd_shutdown(struct bcma_device *dev)
|
|
+{
|
|
+ bcma_core_disable(dev, 0);
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_PM
|
|
+
|
|
+static int bcma_hcd_suspend(struct bcma_device *dev, pm_message_t state)
|
|
+{
|
|
+ bcma_core_disable(dev, 0);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int bcma_hcd_resume(struct bcma_device *dev)
|
|
+{
|
|
+ bcma_core_enable(dev, 0);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#else /* !CONFIG_PM */
|
|
+#define bcma_hcd_suspend NULL
|
|
+#define bcma_hcd_resume NULL
|
|
+#endif /* CONFIG_PM */
|
|
+
|
|
+static const struct bcma_device_id bcma_hcd_table[] __devinitconst = {
|
|
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
|
|
+ BCMA_CORETABLE_END
|
|
+};
|
|
+MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
|
|
+
|
|
+static struct bcma_driver bcma_hcd_driver = {
|
|
+ .name = KBUILD_MODNAME,
|
|
+ .id_table = bcma_hcd_table,
|
|
+ .probe = bcma_hcd_probe,
|
|
+ .remove = __devexit_p(bcma_hcd_remove),
|
|
+ .shutdown = bcma_hcd_shutdown,
|
|
+ .suspend = bcma_hcd_suspend,
|
|
+ .resume = bcma_hcd_resume,
|
|
+};
|
|
+
|
|
+static int __init bcma_hcd_init(void)
|
|
+{
|
|
+ return bcma_driver_register(&bcma_hcd_driver);
|
|
+}
|
|
+module_init(bcma_hcd_init);
|
|
+
|
|
+static void __exit bcma_hcd_exit(void)
|
|
+{
|
|
+ bcma_driver_unregister(&bcma_hcd_driver);
|
|
+}
|
|
+module_exit(bcma_hcd_exit);
|